On the Polymer Thickener for Viscosity-Stabilized Solar Pond
スポンサーリンク
概要
- 論文の詳細を見る
The optimal physical properties of an ionized polyacrylamide solution, selected as the most suitable thickener for the insulating layer of a viscosity-stabilized solar pond, are described. Light transmittance, viscosity and viscosity degradation were obtained for a range of thicknesses from 1 cm to 15 cm (1-15 cm), weight concentrations of 0.1-0.5% (0.1-0.5 wt%) and temperatures of the polymer of 20-80℃. Onset of co nvection was also measured for a given thickness of the polymer solution. An exposure test was carried out to prevent degradation of the polymer using an antioxidant. It was confirmed that the viscosity was not decreased and, on the contrary, increased slightly after 100 days. It was shown experimentally that the critical Rayleigh number coincided with the theoretical values reported by Tien et al. [Int. J. Heat Mass Transf. 12 (1969) 1173]. Transmittances of the polymeric gel for the case of vessels greater than 5 cm in thicknesses were better than those of the SPR402 solution (0.5 wt%).
- 社団法人応用物理学会の論文
- 1998-09-15
著者
-
加藤 暢宏
近畿大学生物理工学部
-
加藤 暢宏
近畿大
-
Kato Nobuhiro
Department Of Intelligent Mechanics Faculty Of Biology-oriented Science And Technology Kinki Univers
-
Kato Nobuhiro
Osaka Prefecture University College Of Engineering Department Of Mechanical System Engineering
-
Kato Nobuhiro
Department Of Cellular And Molecular Biology Hiroshima University School Of Medicine
-
MATSUMOTO Toshiro
Department of Intelligent Mechanics, Faculty of Biology-Oriented Science and Technology, Kinki Unive
-
TAGA Masao
Graduate School of Industrial Technology, Kinki University
-
Taga Masao
Graduate School Of Industrial Technology Kinki University
-
Matsumoto Toshiro
Department Of Intelligent Mechanics Faculty Of Biology-oriented Science And Technology Kinki Univers
-
Kato Nobuhiro
Department of Biomedical Engineering, Faculty of Biology Oriented Science and Technology, Kinki University
関連論文
- 212 設計教育のための3次元CAD用e-Learning教材の開発(WS-1 もの造り-技術の伝承の問題点(2),研究発表講演)
- 減圧下で作製した Polydimethylsiloxane well 内で個別培養を行ったヒト胚の発育能
- 微小力測定用ポリマーカンチレバー製作プロセスの改良 (第22回センシングフォーラム 資料--センシング技術の新たな展開と融合) -- (セッション2B2 力学量計測2)
- 高出力レーザビーム整形のためのマルチレベル銅CGHの製作
- 銅のマルチレベルCGHを用いた炭酸ガスレーザのビーム整形
- 炭酸ガスレーザビーム整形のための曲面上CGHの製作
- 高出力炭酸ガスレーザ用回折型ビーム整形素子の開発
- 力曲線測定のための高減衰マイクロカンチレバー : 第2報 一体化ポリイミドカンチレバーの作成
- レーザ表面改質のためのビームシェイピング : 曲面上ホログラムの検討
- 曲面上ホログラムを用いた炭酸ガスレーザビームシェイピング : 設計と評価
- 曲面上ホログラムを用いた炭酸ガスレーザビームシェイピング : ホログラム作成
- 力曲線測定のための高減衰マイクロカンチレバー
- 走査型近視野原子間力顕微鏡によるウシ精子の表面形状の観察
- 力バランス型AFMによるForce Curveの面分布測定
- 産学連携した3次元CAD設計教育の取組み(技術教育・工学教育)
- (3)産学連携した3次元CAD設計教育(教育,日本機械学会賞〔2004年度(平成16年度)審査経過報告〕)
- 3次元CAD用e-Learningコンテンツの開発
- 産学連携した3次元CAD設計教育の取組み
- 近畿大学における3次元設計教育の一事例
- マルチメディア時代における機械系設計教育について : 3次元CADの活用
- 4 産学で連携した 3 次元設計教育の取り組み
- 3415 マルチメディア時代における機械系設計教育について
- 223 表画集熱式ソーラーポンドを用いた温度差発電と温室暖房の複合システム解析(OS-5 環境負荷ミニマイズのための熱流体・環境工学の展開(3))
- ホログラフィ干渉法によるヒト大腿骨の力学的評価
- 268 レーザによって切除された角膜の FEM による応力的解析
- 311 咀嚼筋の作用を受ける顎関節の有限要素法による応力解析(OS11-2 骨格系のモデリングと解析)(OS11 計算バイオメカニクス : バイオエンジニアリング部門との合同企画)
- レーザによって角膜切除された眼球のFEMによる変形解析
- 206 レーザによる角膜切除後の FEM による眼球の変形解析
- 237 有限要素法による顎関節の力学的検討
- 214 レーザーアブレーション法によるハイドロキシアパタイト薄膜の力学的評価
- 粘性安定化ソーラーポンドに用いるポリマー溶液の物理的特性
- 多重カラーフィルタリングによるひずみ測定の新しい方法
- 顕微鏡内蔵型インキュベーター内で poly-(dimethylsiloxane) micro-well による個別培養を行ったヒト胚の形態変化に基づく分割期における胚の選抜
- Formation of Hydroxyapatite Thin Films on Surface-Modified Polytetrafluoroethylene Substrates
- マルチレベルCGHによる炭酸ガスレーザビームシェイピング
- 3C2-1 タッチパネルを用いたアテトーゼ型脳性麻痺身体障害者のための意思伝達装置の開発(OS8:福祉工学・機器,オーガナイズドセッション)
- 219 産学連携した3次元CAD設計教育の取組み(FM-3 課題設定解決能力の育成を目指す工学教育)
- Optical System for Measuring a Rib of Polyethylene Sheet
- tsJT16, a Cell Cycle ts Mutant of Rat Fibroblast Defective in Early G0/G1 Transition, Fails to Induce G1-cyclin and cdk2 Genes after Serum Stimulation at the Nonpermissive Temperature
- Reduction in Feedback BandWidth of the Force-Controlled Atomic Force Microscope Using a Polyimide Cantilever : Surfaces, Interfaces, and Films
- Resonance Characteristics of Micro Cantilever in Liquid
- Poly-Silicon Thin-Film Transistors with Uniform Performance Fabricated by Excimer Laser Annealing
- A New Method to Estimate Grain Boundary Trap State Density in Poly-Si TFTs
- Fine Surface Structure of Bovine Acrosome-Intact and Reacted Spermatozoa Observed by Atomic Force Microscopy
- Poly-(dimethylsiloxane) micro-wellによるヒト胚の個別培養
- On the Polymer Thickener for Viscosity-Stabilized Solar Pond
- ホログラフィ干渉法による腰椎の変形測定
- Measurement of a Transparent Object by Using an Automated Talbot Interferometer
- P-31 極薄アパタイトシートを用いたエナメル質修復法の検討(第1報)(生体親和材料,一般講演(ポスター発表),第59回日本歯科理工学会学術講演会)
- B-28 極薄アパタイトシートを用いた象牙質上への人工エナメル質形成(細胞・生体用セラミックス,一般講演(口頭発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- A-17 極薄アパタイトシートを用いたエナメル質修復法の検討(第2報)(アパタイト,一般講演(口頭発表),第61回日本歯科理工学会学術講演会)
- Fine Surface Structure of Bovine Acrosome-Intact and Reacted Spermatozoa Observed by Atomic Force Microscopy
- Preface
- A-18 Er:YAGレーザーアブレーション法を用いた歯質修復法の検討(第1報)(臨床応用,一般講演(口頭発表),第63回日本歯科理工学会学術講演会)
- Moving-mask Lithography for 3D Microstructure Molding