高張力鋼・軟鋼縦突合せ溶接継手の塑性変形挙動について

概要

論文の詳細を見る
In the preverious report^<1)>, the plastic deformation behaviors of the model joints which were welded between 60 kg/mm^2 high strength steel (HT60) and mild steel (SM41) have been investigated under static tension parallel to the weld line. Because of the asymmetry of specimens, however, it is difficult to estimate from the above experimental results the plastic strain behaviors in the larger size of composite weldment. In the present research, therefore, are used the specimens of composite weldment in which HT60 and SM41 are symmetrically arranged about the axis parallel to the direction of tensile load. And strains which showed up in the specimens are experimentally analyzed by strain gages and Moire method at the successive stages of loading in order to clarify the characteristics of the strain behaviors in the composite weldment consisting of dissimilar steels with different strength. The strains on the HT 60 side of the symmetric specimens of composite weldment do not concentrate so much as in the case of the HT 60 base metal, but rather turn up scattered at places far from the position of fracture initiation. The fact that the strains in that case increase to the same extent as those induced on the SM 41 side of composite weldment is also made known. A remarkable strain concentration is induced outo the HT 60 side of composite weldment after the maximum tensile load is reached, and the fracture is generated also on that same side.
社団法人日本船舶海洋工学会の論文

高張力鋼・軟鋼縦突合せ溶接継手の塑性変形挙動について

スポンサーリンク

概要

著者

関連論文

スポンサーリンク