Routing Methodology for Minimizing Crosstalk in SoC(VLSI Design Technology and CAD)

概要

論文の詳細を見る
In this paper, we propose new physical design techniques to reduce crosstalk noise and crosstalk-induced delay variations caused in a nanometer-scale system-on-a-chip (SoC). We have almost eliminated the coupling effect between signal wires by simply optimizing parameters for the automatic place and route methodology. Our approach consists of two techniques, (1) A 3-D optimization technique for tuning the routing grid configuration both in the horizontal and vertical directions. (2) A co-optimization technique for tuning the cell utilization ratio and the routing grid simultaneously. Experiments on the design of an image processing circuit fabricated in a 0.13 μm CMOS process with six layers of copper interconnect show that crosstalk noise is almost eliminated. From the results of a static timing analysis considering the worst-case crosstalk condition, the longest path delay is decreased by about 15% maximum if technique (1) is used, and by about 7% maximum if technique (2) is used. The 7-15% delay reduction has been achieved without process improvement, and this reduction corresponds to between 1/4 and 1/2 generation of process progress.
社団法人電子情報通信学会の論文
2003-09-01