B203 PEFORMANCE DEMONSTRATION OF POWER GENERATION FROM SOLID WASTES BY COMBINATION OF PYROLYSIS AND STEAM REFORMING
スポンサーリンク
概要
- 論文の詳細を見る
A small-scale gasification system for solid wastes has been developed and tested. In this innovative system, known as the STAR-MEET system, a fixed-bed pyrolyzer combined with a high temperature steam/air reformer is employed. From the experimental results using wood chips and polyolefin (PO) film as feedstocks, it has been demonstrated that injection of high temperature steam/air mixture into the pyrolysis gas can effectively decomposes tar components. As a result, the pyrolysis gas is reformed into tar-free clean gas contains CO and H_2. Experiments of direct steam injection into the pyrolyzer directly were conducted. For the wood chips, feedstock consumption, CO and CH_4 concentration in the reformed gas increased by direct steam injection into the pyrolyzer. For the feedstock which has low melting point like PO film, it was verified that the fixed-bed type of pyrolyzer was suitable for pyrolyzing. Also it was quite demonstrated that the produced reformed gas for a dual-fueled diesel engine was usable for power generation employing.
- 一般社団法人日本機械学会の論文
著者
-
Hara Tsutomu
Shinko Plantech Co. Ltd.
-
Yoshikawa Kunio
Department Of Energy Sciences Interdisciplinary Graduate School Of Science And Engineering Tokyo Ins
-
Yoshikawa Kunio
Department Of Environmental Science And Technology Tokyo Institute Of Technology Yokohama
-
Min Taijin
Department of Environmental Science and Technology, Tokyo Institute of Technology
-
SHINGU Hiroaki
Shinko Plantech Co., Ltd.
-
MATSUBARA Hironao
EcoMEET Solutions Co., Ltd.
-
Shingu Hiroaki
Shinko Plantech Co. Ltd.
-
Min Taijin
Department Of Environmental Science And Technology Tokyo Institute Of Technology Yokohama
-
Min Taijin
Department Of Environmental Science And Technology Tokyo Institute Of Technology
-
Matsubara Hironao
Ecomeet Solutions Co. Ltd.
関連論文
- E102 CLEAN COMBUSTION OF HEAVY OILS WITH HIGH TEMPERATURE AIR COMBUSTION TECHNOLOGY
- TED-AJ03-615 LOW NO_x COMBUSTION OF PETROLEUM WITH HIGH TEMPERATURE AIR COMBUSTION TECHNOLOGY
- High Tar Reduction with Porous Particles for Low Temperature Biomass Gasification : Effects of Porous Particles on Tar and Gas Yields during Sawdust Pyrolysis
- E201 High Tar Reduction with Porous-particles for Low Temperature Biomass Gasification : A Consideration of Mechanism of Capacitance Effect
- B106 GASIFICATION PERFORMANCE OF SOLID FUELS USING HIGH TEMPERATURE AIR BLOWN PEBBLE BED GASIFIER
- 213 Catalytic Reforming of Model Compounds of Pyrolysis Tars(International session)
- Performance of High Temperature Air Combustion Boiler with Low NO_x Emission(Special Issue on International Conference on Power and Energy System)
- Nonlinear Ionization Instability of Plasma in Inert Gas Cycle Direct Power Generation
- A108 PERFORMANCE OF A DUAL-FUELED DIESEL ENGINE DRIVEN BY LOW CALORIFIC GAS
- R&D on Micro-pyrolyzer for Solid Wastes Using High Temperature Steam and Air(Special Issue on International Conference on Power and Energy System)
- Studies on a High Temperature Regenerative Heat Exchanger for Closed Cycle MHD Power Generation : Heat Transfer Analysis for the Combustion Chamber
- B203 PEFORMANCE DEMONSTRATION OF POWER GENERATION FROM SOLID WASTES BY COMBINATION OF PYROLYSIS AND STEAM REFORMING
- A310 Experimental Study on Gasification of Biomass Using a Pebble Bed Slagging Gasifier
- 4-7-4 Combined pyrolysis and catalytic reforming of waste plastic for the polygeneration of solid, gaseous and liquid fuels
- Basic Study on Hydrogen-Rich Gas Production by High Temperature Steam Gasification of Solid Wastes
- 420 スタティックミキサーを用いたコーン油からのバイオディーゼル製造のためのエステル交換反応の反応速度(新エネルギー(3))