E102 CLEAN COMBUSTION OF HEAVY OILS WITH HIGH TEMPERATURE AIR COMBUSTION TECHNOLOGY
スポンサーリンク
概要
- 論文の詳細を見る
Combustion of heavy oil C and LCO as well as kerosene and heavy oil A was investigated with high temperature air combustion technology. As decreasing air ratio, the combustion took place in the whole of furnace and the luminous flame observed in the combustion at high air ratio was diminished. The emission of NOx was drastically decreased at low air ratio because uniform temperature distribution was observed even in these oil combustion. Even in the combustion of LCO, with temperature air condition. Introduction of high temperature steam causes the reduction of NOx probably because of decreasing the flame temperature.
- 一般社団法人日本機械学会の論文
著者
-
Satoh Masashi
Advanced Technology And Research Institute Petroleum Energy Center
-
YOSHIKAWA Kunio
Department of Environmental Physics and Engineering, Tokyo Institute of Technology
-
SHIMO Nobuo
Advanced Technology and Research Institute, Petroleum Energy Center
-
YONEYAMA Minoru
Advanced Technology and Research Institute, Petroleum Energy Center
-
Shimo Nobuo
Advanced Technology And Research Institute Petroleum Energy Center
-
Yoshikawa Kunio
Department Of Environmental Physics And Engineering Tokyo Institute Of Technology
-
Yoneyama Minoru
Advanced Technology And Research Institute Petroleum Energy Center
-
Yoshikawa Kunio
Department Of Energy Sciences Interdisciplinary Graduate School Of Science And Engineering Tokyo Ins
関連論文
- E102 CLEAN COMBUSTION OF HEAVY OILS WITH HIGH TEMPERATURE AIR COMBUSTION TECHNOLOGY
- TED-AJ03-615 LOW NO_x COMBUSTION OF PETROLEUM WITH HIGH TEMPERATURE AIR COMBUSTION TECHNOLOGY
- High Tar Reduction with Porous Particles for Low Temperature Biomass Gasification : Effects of Porous Particles on Tar and Gas Yields during Sawdust Pyrolysis
- E201 High Tar Reduction with Porous-particles for Low Temperature Biomass Gasification : A Consideration of Mechanism of Capacitance Effect
- B106 GASIFICATION PERFORMANCE OF SOLID FUELS USING HIGH TEMPERATURE AIR BLOWN PEBBLE BED GASIFIER
- 213 Catalytic Reforming of Model Compounds of Pyrolysis Tars(International session)
- Performance of High Temperature Air Combustion Boiler with Low NO_x Emission(Special Issue on International Conference on Power and Energy System)
- Nonlinear Ionization Instability of Plasma in Inert Gas Cycle Direct Power Generation
- A108 PERFORMANCE OF A DUAL-FUELED DIESEL ENGINE DRIVEN BY LOW CALORIFIC GAS
- R&D on Micro-pyrolyzer for Solid Wastes Using High Temperature Steam and Air(Special Issue on International Conference on Power and Energy System)
- Studies on a High Temperature Regenerative Heat Exchanger for Closed Cycle MHD Power Generation : Heat Transfer Analysis for the Combustion Chamber
- B203 PEFORMANCE DEMONSTRATION OF POWER GENERATION FROM SOLID WASTES BY COMBINATION OF PYROLYSIS AND STEAM REFORMING
- A310 Experimental Study on Gasification of Biomass Using a Pebble Bed Slagging Gasifier
- 4-7-4 Combined pyrolysis and catalytic reforming of waste plastic for the polygeneration of solid, gaseous and liquid fuels
- Basic Study on Hydrogen-Rich Gas Production by High Temperature Steam Gasification of Solid Wastes
- 420 スタティックミキサーを用いたコーン油からのバイオディーゼル製造のためのエステル交換反応の反応速度(新エネルギー(3))