ICONE11-36245 RECENT ACTIVITIES OF PB-BI TECHNOLOGY FOR ADS AT JAERI
スポンサーリンク
概要
- 論文の詳細を見る
Lead bismuth is to be used as spallation neutron sources and coolant in the sub-critical reactor at the accelerator driven transmutation system (ADS), for reducing the amount of the minor actinide (MA) and the long-lived fission products (LLFP) in the high level radioactive waste. As lead bismuth is used at elevated temperatures, technical issue is to compromise with material performance under flowing lead bismuth and/or with radiation damage by high-energy protons and neutrons. This paper presents a recent activity of target design and lead bismuth technology, which covers flowing tests of lead bismuth, stagnant corrosion tests, oxygen sensor and cleaning techniques. Materials used are SS316.
- 一般社団法人日本機械学会の論文
著者
-
FUTAKAWA Masatoshi
Japan Atomic Energy Agency
-
SAITO Shigeru
Japan Aerospace Exploration Agency
-
SASA Toshinobu
Japan Atomic Energy Agency
-
OIGAWA Hiroyuki
Japan Atomic Energy Agency
-
TAKANO Hideki
Japan Atomic Energy Research Institute
-
KURATA Yuji
Japan Atomic Energy Agency
-
Kikuchi Kenji
Japan Atomic Research Institute
-
WAKAI Eiichi
Japan Atomic Energy Research Institute
-
Oigawa H
Japan Atomic Energy Agency
-
UMENO Makoto
Japan Atomic Energy Agency
-
Mori Keijiro
Japan Atomic Energy Research Institute
-
Kurata Y
Japan Atomic Energy Agency
-
Futakawa Masatoshi
Tokai Research Establishment Japan Atomic Energy Research Institute
-
Saito Shigeru
Japan Atomic Energy Agency
-
Wakai Eiichi
Tokai Research Establishment Japan Atomic Energy Research Institute
-
Kikuchi Kenji
Japan Atomic Energy Agency
-
Wakai Eiichi
Japan Atomic Energy Agency Ibaraki Jpn
関連論文
- Pitting Damage and Residual Stress Induced by Cavitation Erosion on Mercury Target Vessel
- Validation of Computational Results of Rotor/Fuselage Interaction Analysis Using rFlow3D Code
- Analytical Validation of Uncertainty in Reactor Physics Parameters for Nuclear Transmutation Systems
- Neutronics Design of Accelerator-Driven System for Power Flattening and Beam Current Reduction
- Japanese Evaluated Nuclear Data Library Version 3 Revision-3 : JENDL-3.3
- Mockup Experiments on Investigate the Leak Rate Correlation between Mercury and Helium for the Mercury Target System of J-PARC
- Lifetime Estimation of Microbubble in Mercury
- Mitigation Technologies for Damage Induced by Pressure Waves in High-Power Mercury Spallation Neutron Sources (II) : Bubbling Effect to Reduce Pressure Wave
- Microbubble Formation at a Nozzle in Liquid Mercury
- Mitigation Technologies for Damage Induced by Pressure Waves in High-Power Mercury Spallation Neutron Sources (I) —Material Surface Improvement—
- Wettability effect on bubble formation at orifice type nozzle (特集 流動の可視化)
- Failure Probability Estimation of Multi-walled Vessels for Mercury Target
- Laser Surface Alloying of SUS316 Stainless Steel with Al-Si : Effect of Substrate Temperature on Structure and Properties of Modified Layer(Recent Advances in Materials and Processing (I))
- Evaluation of Mechanical Properties and Microstructure in Ion-Irradiated Surface Layer(Recent Advances in Materials and Processing (I))
- Micro-Impact Damage Caused by Mercury Bubble Collapse(Recent Advances in Materials and Processing (I))
- 316 Erosion Damage of Laser Alloyed Stainless Steel in Mercury
- Damage Diagnostic of Localized Impact Erosion by Measuring Acoustic Vibration
- Pitting Damage Formation up to over 10 Million Cycles Off-line Test by MIMTM
- ICONE11-36175 Off-line tests on pitting damage in mercury target
- Point Defect Formation in V-4Cr-4Ti and F82H Irradiated with Fission and Fusion Neutrons
- Analytical Validation of Uncertainty in Reactor Physics Parameters for Nuclear Transmutation Systems
- Distribution of Microbubble Sizes and Behavior of Large Bubbles in Mercury Flow in a Mockup Target Model of J-PARC
- Parametric Survey for Benefit of Partitioning and Transmutation Technology in Terms of High-level Radioactive Waste Disposal
- Microstructural Evolution of Fe-Cr-W Model Alloys During Fe^+ Ion Irradiation
- Measurement of Uranium-238 Doppler Effect in a Nitride Fueled LMFBR at FCA
- Conceptual Design Study of Beam Window for Accelerator-Driven System
- Impact of Partitioning and Transmutation on High-Level Waste Disposal for the Fast Breeder Reactor Fuel Cycle
- Impact of Partitioning and Transmutation on LWR High-Level Waste Disposal
- Research and Development Program on Accelerator Driven Subcritical System in JAEA
- Neutronics Design for Lead-Bismuth Cooled Accelerator-Driven System for Transmutation of Minor Actinide
- ICONE11-36475 Research and Development on Accelerator-driven Transmutation System at JAERI
- Lead-Bismuth Eutectic Compatibility with Materials in the Concept of Spoliation Target for ADS(International Conferences on Power and Energy System)
- ICONE11-36245 RECENT ACTIVITIES OF PB-BI TECHNOLOGY FOR ADS AT JAERI
- Stress Waves due to Deposited Heat in Mercury and Lead Spallation Targets
- Experimental Investigation of Lead-Bismuth Evaporation Behavior
- Effects of Helium Production and Heat Treatment on Neutron Irradiation Hardening of F82H Steels Irradiated with Neutrons
- Compact Coating of Tantalum on Tungsten Prepared by Molten Salt Electrodeposition
- Electro-Deposition of Tantalum on Tungsten and Nickel in LiF-NaF-CaF_2 Melt Containing K_2TaF_7-Electrochemical Study
- 315 Mechanical Property Evaluation of Nanoscale Zone by Indentation Technique
- 106 Strain Rate Dependence on Electric Resistivity of Austenitic Stainless Steel
- Distribution of Microbubble Sizes and Behavior of Large Bubbles in Mercury Flow in a Mockup Target Model of J-PARC
- Dynamic Response of Mercury Subjected to Pressure Wave
- Conceptual Design Study of Beam Window for Accelerator-Driven System
- Development of a Filler Metal for Weldments of a Ni-Cr-W Superalloy with High Creep Strength(Special Issue on Creep and Fatigue at Elevated Temperatures)
- SB-02-1(064) Development of a filler metal for weldments of a Ni-Cr-W superalloy with high creep strength(Materials Performance in Nuclear Application 2)
- Long-Term Creep Properties of Hastelloy XR in Simulated High-Temperature Gas-Cooled Reactor Helium
- Mitigation Technologies for Damage Induced by Pressure Waves in High-Power Mercury Spallation Neutron Sources (III) — Consideration of the Effect of Microbubbles on Pressure Wave Propagation through a Water Test —
- Aerodynamic/Acoustic Analysis for Main Rotor and Tail Rotor of Helicopter
- Creep Properties of Base Metal and Welded Joint of Hastelloy XR Produced for High-Temperature Engineering Test Reactor in Simulated Primary Coolant Helium
- Mechanical Properties and Microstructure of F82H Steel doped with Boron or Boron and Nitrogen as a Function of Heat Treatment
- Impact of Partitioning and Transmutation on High-Level Waste Disposal for the Fast Breeder Reactor Fuel Cycle
- Equilibrium Evaporation Behavior of Polonium and Its Homologue Tellurium in Liquid Lead-Bismuth Eutectic
- Effects of Neutron Irradiation on Tensile Properties in High-Purity Fe-(9-50) Cr and Fe-50Cr-xW Alloys
- Crack Initiation and Growth Behavior for High Temperature Creep Fatigue Interaction in a Notched Specimen of Ni-Based Alloy : Solid-Mechanics, Strength of Materials
- SB-03-3(074) Inelastic Constitutive Equation in Alloy800H(Materials Performance in Nuclear Application 3)
- Applicability of Al-Powder-Alloy Coating to Corrosion Barriers of 316SS in Liquid Lead-Bismuth Eutectic
- Effect of Initial Heat Treatment on Tensile Properties of F82H Steel Irradiated by Neutrons
- Heat Treatment Effects on Microstructures and DBTT of F82H Steel Doped with Boron and Nitrogen
- ICONE11-36094 STRUCTURAL INTEGRITY OF BEAM WINDOW OF MERCURY TARGET
- Temperature Dependence of Creep Properties of Cold-worked Hastelloy XR
- Damage Structures and Mechanical Properties of High-Purity Fe-9Cr Alloys Irradiated by Neutrons
- Mechanical Property of F82H Steel Doped with Boron and Nitrogen
- Application of an active device for helicopter noise reduction in JAXA
- Mitigation Technologies for Damage Induced by Pressure Waves in High-Power Mercury Spallation Neutron Sources (III) : Consideration of the Effect of Microbubbles on Pressure Wave Propagation through a Water Test
- Corrosion of CrN-Coated Steels in Liquid Pb-Bi
- Temperature Dependence of Corrosion of Ferritic/Martensitic and Austenitic Steels in Liquid Lead-Bismuth Eutectic
- Estimation of acceptable beam-trip frequencies of accelerators for accelerator-driven systems and comparison with existing performance data
- Sound Radiation from a Housing Containing a Vibration Source
- Temperature Dependence of Parameters Used in Intermediate Treatment of Resonance Absorption
- Multi-level correction to breit-wigner single-level formula.
- Effective multiplication factors and reaction rates calculated with fission spectra of U-235,U-238 and Pu-239.
- Preliminary Results of Benchmark Tests on JENDL-2
- Doppler effect of structural materials in fast reactors.
- Intermediate Neutron Resonance Absorption with Interference Scattering in Heterogeneous Systems
- Number of Resonances to be Adopted for Obtaining Practically Reliable Cross Section Curves
- Accuracy of Analytical Treatments for Resonance Absorption in Doppler Resonance Regions
- Effect of Resonance Scattering of Sodium on Resonance Absorption of U-238
- Effect of fission gas release on burnup characteristics and void reactivity in HCLWRs.