Lead-Bismuth Eutectic Compatibility with Materials in the Concept of Spoliation Target for ADS(<Special Issue>International Conferences on Power and Energy System)
スポンサーリンク
概要
- 論文の詳細を見る
Lead bismuth eutectic (LBE) is favored by spallation neutron sources and coolant in the sub-critical reactor at the accelerator driven nuclear transmutation system (ADS). Technical issues of ADS are material technology of how to compromise with flowing lead bismuth, high-energy proton accelerator technology and a sub-critical reactor system technology. This paper describes LBE technology developed at JAERI. First a scenario in order to realize the ADS is shown. The concept of spallation target test facility is introduced with a target design of thermo-fluid dynamics. Base data of flow rate and temperature of Pb-Bi during LBE circulation are described. The results of LBE loop operation under the flowing conditions of target design concept are reported. The stagnant corrosion tests were done to know the controlling parameters among the various steels. The tube-type oxygen sensor with having the solid electrolyte was studied. Cleaning techniques were developed to remove LBE from materials.
- 一般社団法人日本機械学会の論文
- 2004-05-15
著者
-
SASA Toshinobu
Japan Atomic Energy Agency
-
OIGAWA Hiroyuki
Japan Atomic Energy Agency
-
KURATA Yuji
Japan Atomic Energy Agency
-
MIURA Kuniaki
Sukegawa Electric Co., Ltd.
-
Miura Kuniaki
Sukegawa Electric Co. Ltd.
-
Oigawa H
Japan Atomic Energy Agency
-
WAKAI Eiichi
Tokai Research Institute, JAERI
-
OIGAWA Hiroyuki
Tokai Research Establishment, Japan Atomic Energy Research Institute
-
UMENO Makoto
Japan Atomic Energy Agency
-
KIKUCHI Kenji
Tokai Research Establishment, Japan Atomic Energy Research Institute
-
SAITO Shigeru
Tokai Research Establishment, Japan Atomic Energy Research Institute
-
KURATA Yuji
Tokai Research Establishment, Japan Atomic Energy Research Institute
-
FUTAKAWA Masatoshi
Tokai Research Establishment, Japan Atomic Energy Research Institute
-
SASA Toshinobu
Tokai Research Establishment, Japan Atomic Energy Research Institute
-
UMENO Makoto
Mitsubishi Heavy Industry Co., Ltd.
-
MIZUBAYASHI Hiroshi
Mitsui Engineering & Ship-building Co., Ltd.
-
Kurata Y
Japan Atomic Energy Agency
-
Futakawa Masatoshi
Tokai Research Establishment Japan Atomic Energy Research Institute
-
Mizubayashi Hiroshi
Mitsui Engineering & Ship-building Co. Ltd.
-
Saito Shigeru
Japan Atomic Energy Agency
-
Wakai Eiichi
Tokai Research Establishment Japan Atomic Energy Research Institute
-
Kikuchi Kenji
Japan Atomic Energy Agency
-
OIGAWA Hiroyuki
Tokai Research Establishment, Japan Atomic Energy Research Instisute
関連論文
- Analytical Validation of Uncertainty in Reactor Physics Parameters for Nuclear Transmutation Systems
- Neutronics Design of Accelerator-Driven System for Power Flattening and Beam Current Reduction
- ICONE11-36175 Off-line tests on pitting damage in mercury target
- Analytical Validation of Uncertainty in Reactor Physics Parameters for Nuclear Transmutation Systems
- The Onset of Cavitation and the Acoustic Noise Characteristics of Sodium Flow in a Venturi
- Cavitation Damage in Flowing Liquid Sodium Using Venturi Test Section
- Parametric Survey for Benefit of Partitioning and Transmutation Technology in Terms of High-level Radioactive Waste Disposal
- Microstructural Evolution of Fe-Cr-W Model Alloys During Fe^+ Ion Irradiation
- Measurement of Uranium-238 Doppler Effect in a Nitride Fueled LMFBR at FCA
- High Temperature Doppler Effect Experiment for ^U at FCA, (II) Reaction Rate Measurement up to 2, 000℃ with a Foil Heated by Laser Exposure
- High Temperature Doppler Effect Experiment for ^U at FCA, (I) Reactivity Worth Measurement with a Small Heated Sample up to 1, 500℃
- Conceptual Design Study of Beam Window for Accelerator-Driven System
- Impact of Partitioning and Transmutation on High-Level Waste Disposal for the Fast Breeder Reactor Fuel Cycle
- Impact of Partitioning and Transmutation on LWR High-Level Waste Disposal
- Research and Development Program on Accelerator Driven Subcritical System in JAEA
- Neutronics Design for Lead-Bismuth Cooled Accelerator-Driven System for Transmutation of Minor Actinide
- ICONE11-36475 Research and Development on Accelerator-driven Transmutation System at JAERI
- Lead-Bismuth Eutectic Compatibility with Materials in the Concept of Spoliation Target for ADS(International Conferences on Power and Energy System)
- ICONE11-36245 RECENT ACTIVITIES OF PB-BI TECHNOLOGY FOR ADS AT JAERI
- Stress Waves due to Deposited Heat in Mercury and Lead Spallation Targets
- Experimental Investigation of Lead-Bismuth Evaporation Behavior
- Compact Coating of Tantalum on Tungsten Prepared by Molten Salt Electrodeposition
- Electro-Deposition of Tantalum on Tungsten and Nickel in LiF-NaF-CaF_2 Melt Containing K_2TaF_7-Electrochemical Study
- Conceptual Design Study of Beam Window for Accelerator-Driven System
- Development of a Filler Metal for Weldments of a Ni-Cr-W Superalloy with High Creep Strength(Special Issue on Creep and Fatigue at Elevated Temperatures)
- SB-02-1(064) Development of a filler metal for weldments of a Ni-Cr-W superalloy with high creep strength(Materials Performance in Nuclear Application 2)
- Long-Term Creep Properties of Hastelloy XR in Simulated High-Temperature Gas-Cooled Reactor Helium
- Creep Properties of Base Metal and Welded Joint of Hastelloy XR Produced for High-Temperature Engineering Test Reactor in Simulated Primary Coolant Helium
- Impact of Partitioning and Transmutation on High-Level Waste Disposal for the Fast Breeder Reactor Fuel Cycle
- Equilibrium Evaporation Behavior of Polonium and Its Homologue Tellurium in Liquid Lead-Bismuth Eutectic
- Effects of Neutron Irradiation on Tensile Properties in High-Purity Fe-(9-50) Cr and Fe-50Cr-xW Alloys
- Crack Initiation and Growth Behavior for High Temperature Creep Fatigue Interaction in a Notched Specimen of Ni-Based Alloy : Solid-Mechanics, Strength of Materials
- SB-03-3(074) Inelastic Constitutive Equation in Alloy800H(Materials Performance in Nuclear Application 3)
- Applicability of Al-Powder-Alloy Coating to Corrosion Barriers of 316SS in Liquid Lead-Bismuth Eutectic
- Temperature Dependence of Creep Properties of Cold-worked Hastelloy XR
- Corrosion of CrN-Coated Steels in Liquid Pb-Bi
- Temperature Dependence of Corrosion of Ferritic/Martensitic and Austenitic Steels in Liquid Lead-Bismuth Eutectic
- Estimation of acceptable beam-trip frequencies of accelerators for accelerator-driven systems and comparison with existing performance data
- Resonance Interaction Effect between Hot Sample and Cold Core in Analysis of Doppler Effect Measurement.