On the Subharmonic Vibrations of Order 1/2 of a Nonlinear Vibrating System with a Duffing Type Restoring Characteristic : 2nd Report, Case of Soft Spring
スポンサーリンク
概要
- 論文の詳細を見る
The subharmonic oscillations of order 1/2 of a system with a Duffing type restoring characteristic are investigated by making use of a harmonic balance method, under the condition that both the periodic exciting force (e.g., an unbalancing force) and the constant force (e.g., gravity) are operative. Unlike in the preceding paper, the restoring characteristic of this system is assumed to be a soft spring. As a result, the phenomena of these vibrations are considerably complicated and become extremely different from the same kind of vibrations in the hard spring system. However, the occurrence of the 1/2-th subharmonic vibrations in this system can be similar to the hard spring system, even if the constant stimulating force approaches zero.
- 一般社団法人日本機械学会の論文
著者
-
Sueoka Atsuo
Faculty Of Engineering Kyushu University
-
TAMURA Hideyuki
Faculty of Engineering, Kyushu University
-
Inoue Junkichi
Kyushu Insti. Of Tech.
-
Takayama Yoshihisa
Faculty Of Engineering Oita University
-
TSUDA Yoshihiro
Faculty of Engineering, Ohita Univ.
-
KONDO Takahiro
Faculty of Engineering, Kyushu Univ.
-
Tamura H
Department Of Intelligent Machinery And Systems Faculty Of Engineering Kyushu University
-
Tsuda Yoshihiro
Dept. Of Mechanical Engineering Faculty Of Engineering Ohita University
-
Tsuda Yoshihiro
Faculty Of Engineering Oita University
-
Tamura Hideyuki
Faculty Of Engineering Kyoto University
-
Kondo Takahiro
Faculty Of Engineering Kyushu Univ.
関連論文
- 集中系モデルによる非線形圧力波の解析 : 第3報,急拡大・急縮小要素のモデル化(機械力学,計測,自動制御)
- フレキシブル継手と剛体円板を用いたポンプ配管系の振動低減対策 : 直線状配管を対象とした検討(機械力学,計測,自動制御)
- 集中系モデルによる非線形圧力波の解析 : 第2報,分岐要素のモデル化とその妥当性の検証(機械力学,計測,自動制御)
- 円形コイルと円柱磁石で構成された磁気ダンパ(機械力学,計測,自動制御)
- ポンプ配管系の振動低減対策--フレキシブル継手と剛体円板を用いる方法について
- Free Vibration Analysis of a Tree Structure by the Transfer Influence Coefficient Method : 2nd Report, Treatment of a Three-Dimensional Tree Structure and Numerical Computational Results
- Free Vibration Analysis of a Tree Structure by the Transfer Influence Coefficient Method : 1st Report, Formulation for a Two-dimensional Tree Structure
- Nonlinear Forced Vibration of Roller Chain
- Analysis of Coupled Vibration between Railway Vehicle Wheels and a Rail in Both Vertical and Horizontal Directions Using an Approximate Model with an Infinite Number of Vehicles
- Vibration Control of a Rotating Disk Subjected to a Periodic External Force by Dynamic Absorbers
- Nonlinear Response of Roller Chain to Combined Forcing and Parametric Excitations
- Vibrations of Nonlinear Systems with Discontinuities : The Case of a Preloaded Compliance System
- Nonlinear Free Vibration of Roller Chain Streched Vertically
- Steady-State Responses and Stability Analyses of the Duffing's Oscillator with the Softening Spring to an External Exciting Force(Special Issue on Nonlinear Dynamics)
- On the Static Running Accuracy of Cylindrical Roller Bearings
- Research on the Interaction between Power Source and Machinery : Part 3,Vibrating Lift Made by Utilizing the Principle of Self-Synchronization
- Nonlinear Harmonic and Parametric Resonances of a Roller Chain Stretched Horizontally
- Subharmonic Oscillation of Order 1/3 in Roller Chain : 1st Report, Theoretical Analysis of the System Having Multiple Degrees of Freedom
- C37 非線形共振を利用した並列多重倒立振子の振り上げ制御(OS13 機械における非線形振動2)
- C36 クーロン摩擦により生じる自己同期現象 : 2個の自励振動子を結合した場合(OS13 機械における非線形振動2)
- C31 多自由度非線形振動系に対する楕円型平均法について(OS13 機械における非線形振動1)
- C08 ヤコビの楕円関数に基づく振り子の振動制御 : 直列二重振り子への適用(OS7 機械・機械構造物の耐震・免震・振動制御(1))
- 652 部分空間制御法の応用に関する研究
- 651 並列二重倒立振子の高速移動制御に関する研究
- Quenching of Frictional Vibration of a Rotating Circular Plate by Dynamic Absorbers
- Self-Excited vibrations of a Rotating Circular Plate : 2nd Report, The Case of a Circular Plate with Internal Resonance : Series C : Vibration Control Engineering Engineering for Industry
- Self-Excited Vibrations of a Rotating Circular Plate : The Case of a Circular Plate without Internal Resonances : Vibration, Control Engineering, Engineering for Industry
- Exact Solutions of Free Vibration in a Single-Degree-of-Freedom System Having an Arbitrary Cubic Spring Function (Asymmetrical Hard Spring)
- Exact Solutions of Free Vibration in a Single-Degree-of-Freedom System Having an Arbitrary Cubic Spring Function
- Chaotic Behaviour of a Nonlinear Vibrating System with a Retarded Argument
- Vibrations of a Forced Self-excited System with a Retarded Argument : Subharmonic Vibrations of Order 1/2
- On the Subharmonic Vibrations of Order 1/2 of a Nonlinear Vibrating System with a Duffing Type Restoring Characteristic : 2nd Report, Case of Soft Spring
- On the 1/2-th Subharmonic Vibrations of a Non-linear Vibrating System with a Hard Duffing Type Restoring Characteristic
- On the Stability of a Rotating Elastic Shaft Supported by Journal Bearings
- On the Self-Synchronization of Mechanical Vibrators : Part II. Rolling Mechanism with a Pair of Self-Synchronizing Vibrators and Automatic Balancer
- Vibrations of a Forced Self-excited System with Time Lag
- On the Vibrotransportation and Vibroseparation : Part I. On the Stability for the Periodic Motion of the Jumping Granular Solid
- Behavior of Magnetic Dynamic Absorber
- Impact Damper with Granular Materials : 2nd Report, Both Sides Impacts in a Vertical Oscillating System
- On the Self-Synchronization of Mechanical Vibrators : Part 3,Forced Frictional Vibrations
- Polygonal Deformation of Roll-Covering Rubber
- Transfer Stiffness Coefficient Method Combined with Concept of Substructure Synthesis Method : Linear Free and Forced Vibration Analyses of a Straight-Line Beam Structure
- An Approximate Model with an Infinite Number of Vehicles for Analysis of Coupled Vibrations Between Railway Vehicle Wheels and Rail in the Vertical Direction
- Coupled Vibrations Between Railway Vehicle Wheels and a Rail : Coupled Vibration Characteristics in the Horizontal Direction Taking Creep Forces into Account
- Coupled Vibrations Between Railway Vehicle Wheels and a Rail : 4th Report, Analysis of Coupled Vertical Vibrations between Wheels and a Rail
- A Method of Vibrational Analysis Using a Personal Computer (Suggested Transfer Influence Coefficient Method) : Series C : Vibration, Control Engineering, Engineering for Industry
- A Method of Vibrational Analysis Using a Personal Computer (2nd Report, Application of the Transfer Influence Coefficient Method to a Distributed Flexural Vibrational System) : Series C : Vibration, Control Engineering, Engineering for Industry
- Coupled Vibrations between Railway Vehicle Wheels and a Rail : 2nd Report, Axial Steady-state Vibration of a Rotating Wheel
- Coupled Vibrations between Railway Vehicle Wheels and the Rail : 3rd Report, Analysis of Vertical Steady-state Vibrations
- On the Static Running Accuracy of Ball Bearings
- A Method of High Speed Structural Analysis Using a Personal Computer : Comparison with the Transfer Matrix Method
- On the Radial Vibration of Ball Bearings : Computer Simulation
- Coupled Lateral Vibrations between Rail and Railway Vehicle's Wheels Part 1,Equations of Motion of Rail and Its Characteristics
- Free Vibration Analysis of a Multiple Straight-Line Structure Regarded as a Distributed Mass System by the Transfer Influence Coeflicient Method
- Free Vibration Analysis of a Multiple Straight Line Structure Regarded as a Discrete System by the Transfer Influence Coefficient Method
- Exact Solutions of the Autonomous Duffing Equation and Their Computation : Expression of Solutions and Trial Calculation of a Characteristic Parameter) : Vibration, Control Engineering, Engineering for Industry
- Higher Approximate Solutions of the Duffing Equation : Primary Resonance in the Soft Spring System
- Analyses of the Chaotic Vibration of a Magnetically Levitated Body.
- Vibrations of a Forced Self-Excited System with a Retarded Argument : Influence of Initial Conditions
- Nonlinear Response of a Roller Chain to Combined Forcing and Parametric Excitations (4 th Report, Experiment of 1/3-Harmonic and Parametric Combination Resonance -No.2) : Series C : Vibration, Control Engineering, Engineering for Industry
- 1/3-Harmonic and Parametric Combination Resonance of a Roller Chain : Vibration, Control Engineering, Engineering for Industry
- Higher Approximate Solutions of the Duffing Equation : Odd Order Superharmonic Resonances in the Hard Spring System
- On a Method of Higher Approximation and Determination of Stability Criterion for Steady Oscillations in Nonlinear Systems
- Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine
- On the Spring Characteristics of a Ball Bearing : Fluctuation due to ball revolution
- Vibration of Rotor due to Ball Bearing : 3rd Report, Spring Property of Bearing Containing a Large Number of Balls
- Vibration of Rotor Based on Ball Bearing : 1st Report, Static Stiffness of Ball Bearing
- Numerical Scheme and Program for the Solution and Stability Analysis of a Steady Periodic Vibration Problem
- Vibration of Rotor Based on Ball Bearing : 2nd Report, Static Stiffness of Ball Bearing Containing a Small Number of Balls
- On the Spring Characteristics of a Ball Bearing : Extreme Characteristics with Many Balls
- Self-excited Vibration of a Circular Plate Subjected to Frictional Forces Exerted in Two Regions on Its Outer Circumference : Part 2, The Case of a Circular Plate with a Effect of Internal Resonances
- Self-excited Vibration of a Circular Plate Subjected to Frictional Forces Exerted in Two Regions on Its Outer Circumference : Part 1, The Case of a Circular Plate without Effect of Internal Resonances
- Self-excited Vibration of a Circular Plate Subjected to Frictional Forces Exerted in Two Regions on Its Outer Circumference : The Case of a Circular Plate Subjected to Distributed Frictional Forces without the Effect of Internal Resonances
- Pattern Formation Generated in a Winder System of Textile Machine(Special Issue on Nonlinear Dynamics)
- 221 摩擦力が作用する自励振動子群に生じる自己同期現象 : 振動子間のエネルギーの授受に関する検討(自励・鳴き振動,OS-1 振動基礎,総合テーマ「伝統を,未来へ!」)
- 118 ハイブリッド手法による骨組構造物の位相と形状の同時最適化
- 547 パレート最適解のグループ化を用いたハイブリッド最適化手法(動力学問題の最適設計とその周辺技術と応用,OS-14 動力学問題の最適設計・制御とその周辺技術と応用,総合テーマ「伝統を,未来へ!」)
- 356 動吸振器を用いたパターン形成現象に対する防止対策 : 構造変更を考慮した設計法(パターン形成現象,OS-20 パターン形成現象と複雑性,総合テーマ「伝統を,未来へ!」)
- 355 動吸振器を用いたパターン形成現象に対する防止対策の実験的検証(パターン形成現象,OS-20 パターン形成現象と複雑性,総合テーマ「伝統を,未来へ!」)
- 271 集中系モデルによる弾性管内非線形圧力波の解析(圧力脈動・燃焼振動のメカニズム,OS-22 流体関連振動・音響メカニズムと計測制御,総合テーマ「伝統を,未来へ!」)
- 241 大規模非線形系に対する高性能振動解析手法の開発 : 効率的な高次モード消去法(解析,OS-21 機械・構造物における非線形振動とその応用,総合テーマ「伝統を,未来へ!」)
- 238 手持ち振動工具に向けた同期振動発生機構の開発 : 4振動子衝突モデルによる実験的検討(衝突(2),OS-21 機械・構造物における非線形振動とその応用,総合テーマ「伝統を,未来へ!」)
- 237 手持ち振動工具に向けた同期振動発生機構の開発 : 2振動子衝突モデルによる実験的検証(衝突(2),OS-21 機械・構造物における非線形振動とその応用,総合テーマ「伝統を,未来へ!」)
- On the Static Running Accuracy of Ball Bearings : 2nd Report, Results and Discussion
- Optimum Design of Rotating Machine with Overhung Weight : Part 2, Numerical and Experimental Results
- Optimum Design of Rotating Machines with Overhung Weight : Part 1, Formulation of Optimum Problems
- Higher Approximation of Steady Oscillations in Nonlinear Systems with Single Degree of Freedom : Suggested Multi-Harmonic Balance Method