SUS304銅切欠き平板の曲げクリープ・疲労下の変形挙動および寿命評価法の検討

概要

論文の詳細を見る
Creep-fatigue tests were carried out on notched plates under cyclic bending loads out of plane at 550℃,and the local strain at the notch-root and micro crack propagation behavior were measured. Then,inelastic analysis was performed for the experiment by using three kinds of constitutive models,such as kinematic hardening,ORNL and Ohono models. From the comparison of the experiment with the results of analysis,the following conclusions were obtained. (1) Creep strain caused at the notch-root during load holding was negligibly small compared with plastic strain, so that the neighborhood of the notch-root is subjected to constrained strain type damage. (2) The strain range at the notch-root can be calculated from the results of elastic-plastic analysis for monotonic loading independent of the constitutive models used, where the cyclic stress-strain relationship was used as the material monotonic deformation property. (3) The mean strain calculated was consistent with the experimental value in case of kinematic hardening or ORNL model, while not in case of Ohno model. (4) A method for predicting the crack initiation life of a notched plate bas been proposed on the basis of micro-crack propagation behavior obtained by a fundamental creep-fatigue test.
社団法人日本材料学会の論文
1990-07-15