Special Issue on New Functions and Properties of Engineering Materials Created by Designing and Processing
スポンサーリンク
概要
- 論文の詳細を見る
- 2009-07-01
著者
-
NARUSHIMA Takayuki
Department of Materials Processing, Tohoku University
-
MORINAGA Masahiko
Department of Materials Science and Engineering, Graduate School of Engineering, Nagoya University
-
CHIBA Akihiko
Institute for Materials Research, Tohoku University
-
NIINOMI Mitsuo
Institute for Materials Research, Tohoku University
-
Narushima Takayuki
Department Of Materials Processing Tohoku University
-
Narushima Takayuki
Department Of Materials Processing Graduate School Of Engineering Tohoku University
-
FURUHARA Tadashi
Institute for Materials Research, Tohoku University
-
Chiba Akihiko
Institute For Material Research Tohoku University
-
Chiba Akihiko
Institute For Materials Research Tohoku University
-
Furuhara Tadashi
Institute For Materials Research Tohoku University
-
Morinaga Masahiko
Department Of Materials Physics And Energy Engineering Nagoya University
-
Morinaga Masahiko
Department Of Materals Science And Engineering Graduate School Of Engineering Nagoya University
-
Niinomi Mitsuo
Institute For Materials Research Tohoku University
関連論文
- Apatite formation behavior on bio-ceramic films prepared by MOCVD
- Precipitation Behavior in a Hanks' Solution on Ca-P-O Films Prepared by Laser CVD
- Calcium Phosphate Films with/without Heat Treatments Fabricated Using RF Magnetron Sputtering
- Hydroxyapatite Formation on Ca-P-O Coating Prepared by MOCVD
- Precipitation Behavior in a Hanks' Solution on Ca-P-O Films Prepared by Laser CVD
- Surface Hardening Treatment for Titanium Materials Using Ar-5%CO Gas in Combination with Post Heat Treatment under Vacuum
- Local Electronic Structure and Protonic Conductivity in Perovskite-Type Oxide, SrZrO_3
- 09-O-07 Changes in Electrical Conductivity of ZnO with Hydrogen Implantation
- Dynamic Recrystallization Behavior of Biomedical CCM Alloy with Additions of C and N
- Modification of Local Electronic Structures Due to Phase Transition in Perovskite-Type Oxides, SrBO_3 (B=Zr, Ru, Hf)
- Boron and Nitrogen in GaAs and InP Melts Equilibrated with B_2O_3 Flux
- Behavior of Oxygen in Ga-As Melts with the Range of As Content up to 5 mass % Equilibrated with B_2O_3 Flux
- Activity of Ga_2O_3 in B_2O_3 Flux and Standard Free Energies of Formation of CaBO_3 and InBO_3
- A Universal Relation between Electron Density Minima and Ionic Radii in Ceramics
- Phase-Field Simulation of the Effect of Elastic Inhomogeneity on Microstructure Evolution in Ni-Based Superalloys
- Phase-Field Simulation on the Formation and Collapse Processes of the Rafted Structure in Ni-Based Superalloys
- Fabrication of Beta-Ti-Type Ti-Nb-Ta-Zr (TNTZ) Wire with High-Ductility by Arc-Melt-Type Melt-Extraction Method
- Alkali Hydrothermal Synthesis of Zeolite A Using Oxide By-products
- Mechanical Properties of a β-Type Titanium Alloy Cast Using a Calcia Mold for Biomedical Applications
- Quality Improvement of a β-Type Titanium Alloy Cast for Biomedical Applications by Using a Clacia Mold
- Dynamic and Static Restoration Behaviors of Pure Lead and Tin in the Ambient Temperature Range
- Local Geometry and Energetics of Hydrogen in Orthorhombic SrZrO_3
- Energetics of Hydrogen States in SrZrO_3
- Alloy Design of Nb-Based Hydrogen Permeable Membrane with Strong Resistance to Hydrogen Embrittlement
- Alloying Effects on the Hydriding Properties of Niobium Metal
- Alloying Effects on the Phase Stability of Hydrides Formed in Vanadium Alloys
- The Effect of Solute Elements on Hardness and Grain Size in Platinum Based Binary Alloys
- Development of a New Method for Manufacturing Iron Foam Using Gases Generated by Reduction of Iron Oxide
- Mechanical Properties of Biomedical Co-33Cr-5Mo-0.3N Alloy at Elevated Temperatures
- Fatigue Behaviors of Ultra Fine Wires of β-Type and α-Type Titanium Alloys
- Grain Refinement of As Cast Austenite by Dynamic Recrystallization in HSLA Steels
- Solubilities and Equilibrium Distribution Coefficients of Oxygen and Carbon in Silicon
- Deoxidation of NiTi Alloy Melts Using Metallic Barium
- PREFACE
- Special Issue on New Functions and Properties of Engineering Materials Created by Designing and Processing
- PREFACE
- Special Issue on Medical, Healthcare, Sport and Leisure Materials
- Residual Stress Behavior of Rolled Aluminum Alloy A2024T3 in a Thin Plate During Cyclic-Tension Fatigue Studied Using Ultrasonic Horizontally Polarized Shear Waves
- Characteristics of Biomedical Beta-Type Titanium Alloy Subjected to Coating
- Significant Improvement in Mechanical Properties of Biomedical Co-Cr-Mo Alloys with Combination of N Addition and Cr-Enrichment
- Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys
- Effects of Zirconium Addition on Microstructures and Mechanical Properties of Co-29Cr-6Mo Alloy
- Effect of Carbon Addition on Microstructure and Mechanical Properties of a Wrought Co-Cr-Mo Implant Alloy
- Effect of Dissolved Oxygen Content on Pin-on-Disc Wear Behavior of Biomedical Co-Cr-Mo Alloys in a Like-on-Like Configuration in Distilled Water
- Dry Friction and Wear Behavior of Forged Co-29Cr-6Mo Alloy without Ni and C Additions for Implant Applications
- Effect of Oxygen Content on Microstructure and Mechanical Properties of Biomedical Ti-29Nb-13Ta-4.6Zr Alloy under Solutionized and Aged Conditions
- Constructing Processing Maps for Hot Working of Co-Ni-Cr-Mo Superalloy
- Microstructure and Mechanical Properties of Co-29Cr-6Mo Alloy Aged at 1023K
- Effect of Sigma Phase in Co-29Cr-6Mo Alloy on Corrosion Behavior in Saline Solution
- Dental Precision Casting of Ti-29Nb-13Ta-4.6Zr Using Calcia Mold
- Anomalous Thermal Expansion of Cold-Rolled Ti-Nb-Ta-Zr Alloy
- Correlation of High-temperature Steam Oxidation with Hydrogen Dissolution in Pure Iron and Ternary High-chromium Ferritic Steel
- Diffusion of Refractory Elements in Ni-Al-X (X:Re, W) Ternary Alloys
- Hydrogen Dissolution into 10% Chromium Ferritic Steels during High-Temperature Steam Oxidation
- Effects of Nitrogen Irradiation on Photoluminescence around 1.54μm from Er-containing ZnO
- Photoluminescence around 1.54μm from Er-containing ZnO at Room Temperature
- Beneficial Effect of Sulfur State on High-Temperature Steam Oxidation Resistance in High Chromium Ferritic Steels
- Effect of Refractory Elements (X : Mo, W, Re) on the Microstructure Evolution of Fe-8Cr-0.1C-X Martensitic Steels during Tempering
- Effect of Impurity Sulfur on the Formation of Cr_2O_3 and SiO_2 at the Early Stage of Steam Oxidation in both Ferittic and Austenitic Steels
- Alloy Design and Properties of New α+β Titanium Alloy with Excellent Cold Workability, Superplasticity and Cytocompatibility
- Diffusion of Refractory Elements in Ni-X-Y (X, Y:Re, W, Ru, Al) Ternary Alloys
- Al and Re Interdiffusion in the γ-Phase of Ni-Al-Re System
- Theoretical Study of Si K_β X-ray Fluorescence Spectrum of SiO_2-Na_2O Binary Slag by DV-Xα Molecular Orbital Calculation
- Electronic States of Oxygen Ions of Molten Slags Used for Iron and Steel Making
- Microstructures of Zr-Added Co-Cr-Mo Alloy Compacts Fabricated with a Metal Injection Molding Process and Their Metal Release in 1mass% Lactic Acid
- Oxygen Distribution in Titanium Single Crystal Fabricated by Optical Floating-Zone Method under Extremely Low Oxygen Partial Pressure
- Evaluation of Sliding Wear Resistant Property of C. P. Titanium and SP-700 Titanium Alloy Surface-hardened by Ar-5%CO Gas
- Variations in the Microstructure and Hardness with Solution Treating and Aging Conditions in New α+β Titanium Alloy Ti-4.5%Al-6%Nb-2%Fe-2%Mo
- Influence of Cold-Working and Subsequent Heat-Treatment on Young's Modulus and Strength of Co-Ni-Cr-Mo Alloy
- Microstructure and Mechanical Properties of α' Martensite Type Ti Alloys Deformed under the α' Processing
- Interdiffusion of Refractory Elements in Fe-Cr-X (X-Mo, W) and Fe-Mo-W Ternary Iron Alloys
- Effect of Rhenium Addition on Tungsten Diffusivity in Iron-Chromium Alloys
- (Fe, Cr)_3O_4 Spinel Layer as the Key to Solving the Accelerated Oxidation of High Cr Iron Alloy in High-temperature Steam
- Diffusion of Re and Ru in the γ' Phase of Ni Based Alloys
- Diffusion and γ' Phase Coarsening Kinetics in Ruthenium Containing Nickel Based Alloys
- Interdiffusion in Ni-Co-Re and Ni-Co-Ru Systems
- Austenitic Grain Growth behavior Immediately after Dynamic Recrystallization in HSLA Steels and Austenitic Stainless Steel
- Prediction of the Laves Phase Morphology in Fe-Cr-W-C Quaternary Steels with the Aid of System Free Energy Concept
- Determination of the Cyclic-Tension Fatigue of Extruded Pure Magnesium Using Multiple Ultrasonic Waves
- Friction Coefficient in Hot Compression of Cylindrical Sample
- Evaluation of Dislocation Density in a Mg-Al-Mn-Ca Alloy Determined by X-ray Diffractometry and Transmission Electron Microscopy
- Wear and Mechanical Properties, and Cell Viability of Gas-Nitrided Beta-Type Ti-Nb-Ta-Zr System Alloy for Biomedical Applications
- Estimation of the System Free Energy of Martensite Phase in an Fe-Cr-C Ternary Alloy
- Electronic States Calculation of Cobalt by Using the DV-Xα Cluster Method
- Determination of Free Lime Contents in Slags by Solution Calorimetry
- Isothermal Aging Behavior of Beta Titanium-Manganese Alloys
- Effect of Alloying Elements on Carbon Solubility in Liquid Silicon Equilibrated with Silicon Carbide
- Creep Behavior of Hypoeutectic Mg-Ca Binary Alloys
- Assessment of Strain Energy by Measuring Dislocation Density in Copper and Aluminium Prepared by ECAP and ARB
- PREFACE
- Fabrication of Hydroxyapatite Film on Ti-29Nb-13Ta-4.6Zr Using a MOCVD Technique
- Prospect of Nickel-based Superalloys with Low Cr and High Re Contents
- Mass Loss of Cr_2O_3 during Exposure to Steam at 923K and Its Suppression by Sulfur Doping
- Determination of the Mechanical Properties of Extruded Pure Magnesium During Tension-Tension Low-Cycle Fatigue Using Ultrasonic Testing
- Construction of Processing Map for Biomedical Co-29Cr-6Mo-0.23C-0.14N Alloy by Using Compression Tests
- Alkali Hydrothermal Synthesis of Zeolite A Using Oxide By-products
- Development of Novel Methods for Compensation of Stress-strain Curves
- Remarkable Improvement in Steam Oxidation Resistance Due to the Presence of Sulfur in High Cr Ferrtic Steels.
- Development of High Modulus Ti-Fe-Cu Alloys for Biomedical Applications
- Formation of Anatase on Commercially Pure Ti by Two-Step Thermal Oxidation Using N_2-CO Gas