Determination of the Mechanical Properties of Extruded Pure Magnesium During Tension-Tension Low-Cycle Fatigue Using Ultrasonic Testing
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2010-11-01
著者
-
FUKUHARA Mikio
Institute for Materials Research, Tohoku University
-
CHIBA Akihiko
Institute for Materials Research, Tohoku University
-
Chiba Akihiko
Inst. For Materials Res. Tohoku Univ.
-
Fukuhara Mikio
Inst. For Materials Res. Tohoku Univ.
-
Fukuhara Mikio
Institute For Materials Research Tohoku University
-
Chiba Akihiko
Institute For Material Research Tohoku University
-
Yamagishi Hideki
Central Research Institute Toyama Industrial Technology Center
関連論文
- Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
- Dynamic Recrystallization Behavior of Biomedical CCM Alloy with Additions of C and N
- Heat Capacity and Thermodynamic Functions of Ni_Nb_Zr_ Glassy Alloy
- Annealing-Induced Devitrification Behavior of a Ti_Zr_Ni_Cu_ Glassy Alloy
- Mechanical Properties of Biomedical Co-33Cr-5Mo-0.3N Alloy at Elevated Temperatures
- PREFACE
- Special Issue on New Functions and Properties of Engineering Materials Created by Designing and Processing
- Residual Stress Behavior of Rolled Aluminum Alloy A2024T3 in a Thin Plate During Cyclic-Tension Fatigue Studied Using Ultrasonic Horizontally Polarized Shear Waves
- Significant Improvement in Mechanical Properties of Biomedical Co-Cr-Mo Alloys with Combination of N Addition and Cr-Enrichment
- Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys
- Effects of Zirconium Addition on Microstructures and Mechanical Properties of Co-29Cr-6Mo Alloy
- Effect of Carbon Addition on Microstructure and Mechanical Properties of a Wrought Co-Cr-Mo Implant Alloy
- Effect of Dissolved Oxygen Content on Pin-on-Disc Wear Behavior of Biomedical Co-Cr-Mo Alloys in a Like-on-Like Configuration in Distilled Water
- Dry Friction and Wear Behavior of Forged Co-29Cr-6Mo Alloy without Ni and C Additions for Implant Applications
- Constructing Processing Maps for Hot Working of Co-Ni-Cr-Mo Superalloy
- Determination of the mechanical properties of extruded pure magnesium during tension-tension low-cycle fatigue using ultrasonic testing
- Microstructure and Mechanical Properties of Co-29Cr-6Mo Alloy Aged at 1023K
- Effect of Sigma Phase in Co-29Cr-6Mo Alloy on Corrosion Behavior in Saline Solution
- Microstructures of Zr-Added Co-Cr-Mo Alloy Compacts Fabricated with a Metal Injection Molding Process and Their Metal Release in 1mass% Lactic Acid
- Influence of Cold-Working and Subsequent Heat-Treatment on Young's Modulus and Strength of Co-Ni-Cr-Mo Alloy
- Microstructure and Mechanical Properties of α' Martensite Type Ti Alloys Deformed under the α' Processing
- Determination of the Cyclic-Tension Fatigue of Extruded Pure Magnesium Using Multiple Ultrasonic Waves
- Friction Coefficient in Hot Compression of Cylindrical Sample
- Solderability of Bulk Metallic Glasses Using Lead-Free Solders
- Dealloying of Cu-Zr-Ti Bulk Metallic Glass in Hydrofluoric Acid Solution
- Determination of the Mechanical Properties of Extruded Pure Magnesium During Tension-Tension Low-Cycle Fatigue Using Ultrasonic Testing
- Construction of Processing Map for Biomedical Co-29Cr-6Mo-0.23C-0.14N Alloy by Using Compression Tests
- Detection of the second harmonics of Lamb waves in fatigued magnesium plates
- Development of Novel Methods for Compensation of Stress-strain Curves
- Effect of Phase Transformation on Tensile Behavior of Co–Cr–Mo Alloy Fabricated by Electron-beam Melting