HIP合成ダイヤモンド/SiC複合焼結体の物性評価と高圧発生用アンビルへの応用
スポンサーリンク
概要
- 論文の詳細を見る
Diamond grains of various sizes and also the mixed powders of diamond and Si made up in various proportions in different proportions were prepared as the starting materials for synthesis experiments. Respective material was charged in a capsule consisted of Si and SiC and HIPed at 1450°C and 200 MPa for 30 min. After the capsule was removed by mechanical and chemical treatments, their physical properties were measured. By comparison of the density and the bulk modulus, the sample whose starting material was diamond of 12 μm without additive showed the best values. These values were close to those of the material obtained by means of the solid compression of diamond and SiC (ADC). Microscopic observation and XRD revealed that the obtained samples was a sintered compound of diamond and SiC whose hardness was comparable to that of ADC.The compound was used to make high-pressure anvils. The prepared test anvils were strong enough to generate high pressures and temperatures up to 17 GPa and 700°C. The transparency to X-ray is another advantage of this anvil. Its further use is expected in high pressure research such as in situ observations of physical properties under compression.
- 社団法人粉体粉末冶金協会の論文
- 2005-10-15
著者
-
大高 理
大阪大・理
-
大高 理
大阪大学大学院理学研究科 宇宙地球科学専攻
-
大高 理
阪大教養
-
下埜 勝
龍谷大学理工学部
-
大高 理
大阪大学大学院理学研究科宇宙地球科学専攻
-
大高 理
大阪大学大学院 理学研究科 宇宙地球科学専攻
関連論文
- ZrO_2ナノ粒子の高圧下でのXAFSによる研究
- ピストン・シリンダー型高圧装置を用いた準安定単斜晶ジルコニア高密度セラミックスの作製(極限環境)
- 高圧高温下でのXAFS法と回折法によるAgIの研究
- 圧力誘起による液体ジャーマネートの構造変化
- 高温高圧下におけるSrGeO_3の構造変化
- マルチアンビルを用いた高温高圧実験-最近の成果-
- 406 ピストン・シリンダー型高圧装置を用いた準安定単斜晶ジルコニア高密度セラミックスの作製(高圧力フォーラム, 複合材料の成形・加工最前線)
- パイロープにおけるMgの静的変位
- 連載開始にあたって
- 中性子利用へ向けたマグマ研究