MIM Ti-6Al-4V合金における焼結敷板の機械的特性に及ぼす影響
スポンサーリンク
概要
- 論文の詳細を見る
Ti and Ti alloys show superior properties of lightweight, high strength and corrosion resistance, etc. Since Ti is very active at high temperature, the mechanical properties may be poor due to the oxygen and carbon contamination caused by type of substrate at high temperature and long time sintering. In this study, the effects of substrate for sintering on the mechanical properties of injection molded Ti-6Al-4V alloy were investigated using two types of substrates such as ZrO2 and Y2O3 (as-received or baked in vacuum).The relative density, microstructure and hardness of sintered compacts were changed hardly, but the tensile properties were changed by baking treatment and type of substrate for sintering. The oxygen content of the sintered compacts by using as-received ZrO2 substrate increased with increasing sintering time, then the elongation of the compacts were reduced. While the compacts using the baked ZrO2 and Y2O3 substrates showed good tensile properties because of low carbon and oxygen content.
- 社団法人粉体粉末冶金協会の論文
- 2006-09-15
著者
-
三浦 秀士
九州大学大学院工学研究院機械工学部門
-
植松 俊明
静岡県工業技術研究所浜松工業技術支援センター
-
三浦 秀士
熊本大学工学部知能生産システム工学科
-
伊藤 芳典
静岡県工業技術研究所浜松工業技術支援センター
-
伊藤 芳典
浜松工技セ
-
佐藤 憲治
静岡県浜松工業技術センター
-
佐藤 憲治
静岡県工業技術研究所浜松工業技術支援センター
-
伊藤 芳典
静岡県浜松工業技術センター
-
植松 俊明
静岡県浜松工業技術センター
-
三浦 博己
電気通信大学知能機械工学科
-
三浦 秀士
九州大学大学院工学研究院
-
三浦 秀士
熊本大学工学部材料開発工学科
-
伊藤 芳典
静岡県工業技術研究所浜松工業技術支援センター材料科
-
三浦 博己
電気通信大学 電気通信学部
-
三浦 秀士
九州大学大学院工学研究院 機械工学部門 材料加工学研究室
-
三浦 秀士
九州大学大学院
関連論文
- 直接金属レーザ焼結法(DMLS)による密度傾斜材料のための多孔質構造の制御
- MIMプロセスにおけるチタン合金部材の変形挙動の評価ならびに解析
- 射出成形による鉄系軟磁性粉末の高密度化(第2報)
- Ag-Sn系の液相焼結現象を応用した多層基板接合技術の開発−第1報:拡散過程の解析−
- 鉄系焼結合金歯車の歯元曲げ疲労強度に及ぼす転造の影響
- 鉄系焼結合金歯車の転造による高精度化・高強度化-第2報- : 修整歯形工具による鉄系焼結合金歯車の各種転造特性
- 鉄系焼結合金ローラの転造による面圧疲労強度の向上 : 第1報
- MIMプロセスにおけるFe-50mass%Niの磁気特性改善
- Ag-Sn系の液相焼結現象を応用した多層基板接合技術の開発 : 第1報 : 拡散過程の解析
- 鉄系焼結合金歯車の転造による高精度化・高強度化-第3報- : 修整歯形工具による鉄系焼結合金歯車の歯元曲げ疲労強度向上