Effect of the Porous Structure of a Coating Layer on the Release Rate of Core Particle
スポンサーリンク
概要
- 論文の詳細を見る
The effect of a porous structure formed after dissolution of fine particles dispersed in a coating layer was investigated on the release rate of core particle by random walk simulation. As a result, the release rate was described by the structure coefficient which increases with the ratio of contact to the surface area. The ratio was independent of the average size of soluble particles and it increased with an increasing volume fraction of soluble particles, with an increasing geometric standard deviation of particle size at the low volume fraction, and with a decreasing standard deviation at the high fraction. Then, the simple correlation was established between the structure coefficient and porous-structure parameters, which should be useful for the design of the release pattern.
- 社団法人 化学工学会の論文
- 2003-06-01
著者
-
Shinohara K
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
GOLMAN Boris
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Golman B
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
Golman Boris
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
-
SHINOHARA KUNIO
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
ITO RYUSEI
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University
-
Shinohara Kunio
Division Of Material Science And Engineering Graduate School Of Engineering Hokkaido University
-
Ito Ryusei
Division Of Materials Science And Engineering Graduate School Of Engineering Hokkaido University
関連論文
- 並流型移動層反応器におけるSi_3N_4超微粒子のAlNによるCVD被覆
- Quantitative Characterization of Microstructure of WC-Co/TiC-Al_2O_3 Composite Materials with Relate to Mechanical Properties
- New Design of Microstructure of WC-Co/TiC-Al_2O_3 Composite Materials by Mechanical Coating of Particles
- Particle flow model in a spouted bed
- Formation of a sigmoidal release pattern of core particles coated with layers of soluble and permeable particles
- Multiple-Layer Coating of Solids with Impermeable Film Dispersing Permeable Particles for Controlled Release
- Effect of the Porous Structure of a Coating Layer on the Release Rate of Core Particle
- Controlled Release of Core Particle Coated with Soluble Particles in Impermeable Layer
- Mechanical and Thermal Properties of Hot-Pressed Compact of Si_3 N_4 Particles Coated with AIN by CVD
- CVDによる超微粒子被覆用向流型移動層反応器の設計
- Estimation of Diameter of Granule Prepared by Spray Drying of Slurry with Fast and Easy Evaporation
- Basic Model of Spray Drying Granulation
- 触媒活性膜反応器による発熱性逐次反応の選択率と収率
- Preparation of large agglomerates of high voidage from charcoal particles for liquid absorption and release
- Agglomerating fluidization of group C particles : major factors of coalescence and breakup of agglomerates
- Density segregation of a binary solids mixture during batch operation in a two-dimensional hopper
- Segregation indices of multi-sized particle mixtures during the filling of a two-dimensional hopper
- Mechanism of particle shape modification by dry impact blending
- Air pressure drop across a particle moving bed in a three-dimensional cold model of a blast furnace
- Comparison of moving bed reactors for chemical vapor deposition coating of fine particles
- Hot Hardness of WC-Co/TiC-Al_2O_3 Composite Materials
- NO Adsorption Characteristics of Agglomerated Zeolite Particles
- Modeling of CVD Coating Inside Agglomerate of Fine Particles
- Size segregation of multicomponent particles during the filling of a hopper
- Image Blurring by Thermal Diffusion in the Observation of Hydrated Biomolecules with Soft X-Ray Microscopy
- Preparation of New WC-Co/TiC-Al_2O_3 Composite Materials with Mechanically Coated Particles