Effect of β Phase Stability at Room Temperature on Mechanical Properties in β-Rich α+β Type Ti-4.5Al-3V-2Mo-2Fe Alloy
スポンサーリンク
概要
- 論文の詳細を見る
- 2002-02-15
著者
-
OUCHI Chiaki
Department of Materials Processing, Tohoku University
-
Ouchi C
Department Of Materials Processing Tohoku University
-
Ouchi Chiaki
Tohoku University
-
Ouchi Chiaki
Department Of Metallurgy Tohoku University
-
NIINOMI Mitsuo
Department of Production Systems Engineering, Toyohashi University of Technology
-
Ouchi Chiaki
Department Of Materials Processing Graduate School Of Engineering Tohoku University
-
EYLON Daniel
Graduate Materials Engineering, University of Dayton
-
FUJISHIRO Shiro
Asian Office of Aerospace R&D, USAFOSR
-
Niinomi Mitsuo
Department Of Biomaterials Science Institute For Materials Research Tohoku University
-
Eylon D.
Graduate Materials Engineering University Of Dayton
-
Fujishiro S.
Asian Office Of Aerospace R&d Usafosr
-
Eylon Daniel
Graduate Materials Engineering KL-407, University of Dayton
関連論文
- Surface Hardening Treatment for Titanium Materials Using Ar-5%CO Gas in Combination with Post Heat Treatment under Vacuum
- Boron and Nitrogen in GaAs and InP Melts Equilibrated with B_2O_3 Flux
- Behavior of Oxygen in Ga-As Melts with the Range of As Content up to 5 mass % Equilibrated with B_2O_3 Flux
- Dynamic and Static Restoration Behaviors of Pure Lead and Tin in the Ambient Temperature Range
- The Effect of Solute Elements on Hardness and Grain Size in Platinum Based Binary Alloys
- Development of a New Method for Manufacturing Iron Foam Using Gases Generated by Reduction of Iron Oxide
- Hydrothermal Synthesis of Zeolite A Using Blast Furnace Slag
- The Effects of the Oxygen-enriched Surface Layer on Mechanical Properties of α+β Type Titanium Alloys
- Development of Steel Plates by Intensive Use of TMCP and Direct Quenching Processes
- Fatigue Behaviors of Ultra Fine Wires of β-Type and α-Type Titanium Alloys
- Oxidation or Nitridation Behavior of Pure Chromium and Chromium Alloys Containing 10mass%Ni or Fe in Atmospheric Heating
- Alloy Design and Property Evaluation of New β Type Titanium Alloy with Excellent Cold Workability and Biocompatibility
- Preparation of Calcium Phosphate Films by Radiofrequency Magnetron Sputtering
- Grain Refinement of As Cast Austenite by Dynamic Recrystallization in HSLA Steels
- Solubilities and Equilibrium Distribution Coefficients of Oxygen and Carbon in Silicon
- Special Issue on Medical, Healthcare, Sport and Leisure Materials
- Image-Based Mechanical Analysis of Multifilamentary Microstructure Formation in Al-Fe Heavily Deformed In-Situ Composites
- Mechanical Properties of Biocompatible Beta-Type Titanium Alloy Coated with Calcium Phosphate Invert Glass-Ceramic Layer
- Assessment of Thermo-Mechanical Fatigue Behaviors of Cast Al-Si Alloys by Experiments and Multi-Step Numerical Simulation
- Development of Low Rigidity β-type Titanium Alloy for Biomedical Applications
- Effect of Microstructure on Fatigue Strength of Bovine Compact Bones
- Microstructural Modification in a Beta Titanium Alloy for Implant Applications
- Alloy Design and Properties of New α+β Titanium Alloy with Excellent Cold Workability, Superplasticity and Cytocompatibility
- Effects of Nd Content on the Dynamic Elastic Modulus and Mechanical Properties of Titanium-Neodymium Alloys
- Evaluation of Sliding Wear Resistant Property of C. P. Titanium and SP-700 Titanium Alloy Surface-hardened by Ar-5%CO Gas
- Variations in the Microstructure and Hardness with Solution Treating and Aging Conditions in New α+β Titanium Alloy Ti-4.5%Al-6%Nb-2%Fe-2%Mo
- β Grain Refinement due to Small Amounts of Yttrium Addition in α+β Type Titanium Alloy, SP-700
- Austenitic Grain Growth behavior Immediately after Dynamic Recrystallization in HSLA Steels and Austenitic Stainless Steel
- Surface Hardening Treatment for C.P. Titanium and Titanium Alloys in Use of Ar-5%CO Gas
- Effects of Dynamic Recrystallization on γ Grain Refinement and Improvement of Micro Segregation of As Cast Austenite in 9%Ni Steel
- Strength-Ductility Relationship in Solution Treated and Aged α+β Type Ti-4.5%Al-3%V-2%Fe-2%Mo Titanium Alloy
- Comparison of Various Properties between Titanium-Tantalum Alloy and Pure Titanium for Biomedical Applications
- Bioactive Ceramic Surface Modification of β-Type Ti-Nb-Ta-Zr System Alloy by Alkali Solution Treatment
- Effect of β Phase Stability at Room Temperature on Mechanical Properties in β-Rich α+β Type Ti-4.5Al-3V-2Mo-2Fe Alloy
- Effect of Microstructure on Tensile Properties and Static Fracture Toughness of Dental Gold Alloy
- Fretting Fatigue Characteristics with Relating Contact Pressure and Surface Roughness of Highly Workable Titanium Alloy, Ti-4.5Al-3V-2Mo-2Fe
- 605 Fretting Fatigue Characteristics and Microstructure of Ti-4.5Al-3V-2Mo-2Fe for Aircraft Applications
- Special Issue on Recent Research and Developments in Titanium and Its Alloys
- Effect of Al on ω phase transformation behavior in Ti-8V-5Fe-(1-3)Al alloy
- Effect of Nb on Microstructural Characteristics of Ti-Nb-Ta-Zr Alloy for Biomedical Applications
- Effect of Annealing Treatment after Furnace Cooling Treatment on Fracture Toughness of Ti-4.5Al-3V-2Mo-2Fe
- Fracture Characteristics of Ti-4.5Al-3V-2Mo-2Fe Conducted with Slow Furnace Cooling from Solution Treatment Temperature in α+β Field
- Effect of β Phase Stability on Mechanical Properties in a β-Rich α+β Type Titanium Alloy
- Effect of Cooling Rate on Microstructure and Fracture Characteristics of β-Rich α+β Type Ti-4.5Al-3V-2Mo-2Fe Alloy
- Cold Crucible Levitation Melting of Biomedical Ti-30 wt%Ta Alloy
- Alkali Hydrothermal Synthesis of Zeolite A Using Oxide By-products
- Mechanical Properties and Phase Stability of Ti-Nb-Ta-Zr-O Alloys
- Fatigue, Fretting Fatigue and Corrosion Characteristics of Biocompatible Beta Type Titanium Alloy Conducted with Various Thermo-Mechanical Treatments
- 601 Mechanical Performance of New Beta Type Titanium Alloy with Low Modulus for Biomedical Applications Relating with Microstructure
- Dynamic Young's Modulus and Mechanical Properties of Ti-Hf Alloys
- PREFACE
- Biologically and Mechanically Biocompatible Titanium Alloys
- 軽金属の科学と技術--21世紀への展望 Advances in Titanium Technology--an Overview〔含 英語原文〕
- Effect of molecular weight on fatigue characteristics of ultra-high molecular weight polyethylene for implant material
- Fatigue properties of cast Ag-Pd-Cu-Au-Zn alloy for dental applications in the relation with casting defects
- Metallic biomaterials
- Bone Loss and Reduced Bone Quality of the Human Femur after Total Hip Arthroplasty under Stress-Shielding Effects by Titanium-Based Implant
- Microstructure Control of Titanium Aluminide Powder Compacts by Thermochemical Processing
- Recovery of Calcium from BF Slag and Synthesis of Zeolite A Using Its Residue
- Toughness and Strength of Microstructurally Controlled Titanium Alloys.