601 Mechanical Performance of New Beta Type Titanium Alloy with Low Modulus for Biomedical Applications Relating with Microstructure
スポンサーリンク
概要
- 論文の詳細を見る
Microstructures of newly developed biomedical Ti-29Nb-13Ta-4.6Zr conducted with aging at a temperature between 573K and 673K for 259.2 ks after solution treatment at 1063K for 3.6 ks have super fine ω phase or both super fine α and ω phases in β phase. The balance of strength and ductility is much better for the newly developed alloy conducted with aging at 673K after solution treatment than those for the newly developed alloy conducted with aging at 573K or 593K after solution treatment. Plain fatigue limit of the newly developed alloy conducted with solution treatment, and aging at 673K for 259.2 ks after solution treatment are around 400 MPa and 700 MPa, respectively.
- 一般社団法人日本機械学会の論文
著者
-
AKAHORI Toshikazu
Department of Production Systems Engineering, Toyohashi University of Technology
-
Fukui Hisao
Department Of Dental Materials School Of Dentistry Aichi-gakuin University
-
Niinomi Mitsuo
Department Of Biomaterials Science Institute For Materials Research Tohoku University
-
Suzuki Akihiro
Titanium Division Daido Steel Co. Ltd
-
Suzuki Akihiro
R & D Laboratory, Daido Steel Co., Ltd.
-
Fukui Hisao
Department Of Dental Material Science
関連論文
- A-27 固溶体化処理による歯科用金銀パラジウム銅合金の特異硬化とミクロ組織の関係(歯科用合金,一般講演(口頭発表))
- A-26 歯科鋳造用金銀パラジウム合金の銅濃度によるアノード分極挙動(歯科用合金,一般講演(口頭発表))
- P-31 熱処理プロセスによる歯科精密鋳造Ti-29Nb-13Ta-4.6Zr合金の高力学機能化(チタン・チタン合金,一般講演(ポスター発表))
- A-9 歯科用低カラット貴金属合金の特異硬化機構とミクロ組織の関係(金属・腐食1,第51回日本歯科理工学会学術講演会)
- 平成18・19年度日本歯科理工学会教育検討委員会報告書
- A-15 歯科用銀パラジウム金銅合金における溶体化処理時の冷却速度と特異硬化との関係(歯科用合金I,一般講演(口頭発表),第56回日本歯科理工学会学術講演会)
- A-1 再溶解による市販金銀パラジウム合金のミクロ組織の変化(合金・腐食,一般講演(口頭発表),第54回日本歯科理工学会学術講演会)
- A-7 凝固法による市販金銀パラジウム合金のミクロ組織の変化(金属,一般講演(口頭発表),第53回日本歯科理工学会学術講演会)
- A-16 液体急冷凝固法により作製された歯科用金銀パラジウム合金の力学的特性の変化(金属2・鋳造,第52回日本歯科理工学会学術講演会)
- 歯科用セミプレシャス合金のフレッティング疲労特性と破壊メカニズム
- 固溶体化処理を施した歯科用銀合金の特異硬化挙動とミクロ組織の関係
- J0401-3-1 溶体化処理を施した歯科用金パラジウム合金の機械的性質(生体材料およびその表面改質材(3))
- A COMPARISON OF STATIC MECHANICAL PROPERTIES OF A 12%Au : 20%Pd : Ag : Cu ALLOY AND A TYPE IV GOLD ALLOY
- FATIGUE PROPERTIES OF 12%Au-Pd-Ag-Cu ALLOY AND TYPE IV GOLD ALLOY
- A-10 歯科用銀合金のフレッティング疲労特性と破壊メカニズム(金属,一般講演(口頭発表),第48回日本歯科理工学会学術講演会)
- 矯正用アーチワイヤーで連結された下顎歯列における力の伝達
- A-12 粉末冶金法で作製した歯科鋳造用Co-Cr合金の特性(金属,一般講演(口頭発表),第48回日本歯科理工学会学術講演会)
- A-9 歯科用Ag-Pd-Cu-Au-Zn合金の耐食性に及ぼすミクロ組織および引張応力の影響(金属,一般講演(口頭発表),第48回日本歯科理工学会学術講演会)
- Interfacial Oxidations of Pure Titanium and Titanium Alloys with Investments
- Special Issue on Medical, Healthcare, Sport and Leisure Materials
- Image-Based Mechanical Analysis of Multifilamentary Microstructure Formation in Al-Fe Heavily Deformed In-Situ Composites
- Mechanical Properties of Biocompatible Beta-Type Titanium Alloy Coated with Calcium Phosphate Invert Glass-Ceramic Layer
- Assessment of Thermo-Mechanical Fatigue Behaviors of Cast Al-Si Alloys by Experiments and Multi-Step Numerical Simulation
- Development of Low Rigidity β-type Titanium Alloy for Biomedical Applications
- Effect of Microstructure on Fatigue Strength of Bovine Compact Bones
- Microstructural Modification in a Beta Titanium Alloy for Implant Applications
- A-11 Ag-25mass%Pd-Cu合金の熱処理挙動に及ぼすCu添加量の影響(金属,一般講演(口頭発表),第48回日本歯科理工学会学術講演会)
- Effects of Nd Content on the Dynamic Elastic Modulus and Mechanical Properties of Titanium-Neodymium Alloys
- Wear and Mechanical Properties, and Cell Viability of Gas-Nitrided Beta-Type Ti-Nb-Ta-Zr System Alloy for Biomedical Applications
- 浮揚融解法におけるTi-Ta-Nb三元系合金の溶製
- Comparison of Various Properties between Titanium-Tantalum Alloy and Pure Titanium for Biomedical Applications
- Bioactive Ceramic Surface Modification of β-Type Ti-Nb-Ta-Zr System Alloy by Alkali Solution Treatment
- 歯科金属材料--その組成と特性 (特集 金属系バイオマテリアルの研究開発・最前線)
- 歯科用β型チタン合金の力学的特性に及ぼす時効処理の影響
- Effect of β Phase Stability at Room Temperature on Mechanical Properties in β-Rich α+β Type Ti-4.5Al-3V-2Mo-2Fe Alloy
- 表面硬化処理した生体用β型チタン合金の力学的特性
- Effect of Microstructure on Tensile Properties and Static Fracture Toughness of Dental Gold Alloy
- Fretting Fatigue Characteristics with Relating Contact Pressure and Surface Roughness of Highly Workable Titanium Alloy, Ti-4.5Al-3V-2Mo-2Fe
- 605 Fretting Fatigue Characteristics and Microstructure of Ti-4.5Al-3V-2Mo-2Fe for Aircraft Applications
- FATIGUE PROPERTIES OF THE WROUGHT AND CAST SPECIMEN OF DENTAL ALLOYS
- A Numerical Simulation of Orthodontic Tooth Movement Produced by a Canine Retraction Spring
- Calculation of Natural Frequencies of Teeth Supported with the Periodontal Ligament
- Video Tracking of a Fatigue Crack with a Long Distance Microscope
- Effect of Heat Treatment on Mechanical Properties of Type IV Gold and Ag-Pd-Cu-Au Dental Alloys
- Special Issue on Recent Research and Developments in Titanium and Its Alloys
- SETTING RETARDATION OF A COMMERCIAL COLD-CURING RESIN BY ADDING FULLERENE C_
- 歯科用貴金属合金およびチタン合金の塩化物水溶液系中における電気化学的挙動
- Effect of Nb on Microstructural Characteristics of Ti-Nb-Ta-Zr Alloy for Biomedical Applications
- Effect of Cooling Rate on Microstructure and Fracture Characteristics of β-Rich α+β Type Ti-4.5Al-3V-2Mo-2Fe Alloy
- Cold Crucible Levitation Melting of Biomedical Ti-30 wt%Ta Alloy
- Mechanical Properties and Phase Stability of Ti-Nb-Ta-Zr-O Alloys
- Fatigue, Fretting Fatigue and Corrosion Characteristics of Biocompatible Beta Type Titanium Alloy Conducted with Various Thermo-Mechanical Treatments
- OS7(2)-5(OS07W0142) Fatigue Characteristics of Low Rigidity Titanium Alloy, Ti-29Nb-13Ta-4.6Zr, for Biomedical Applications
- 601 Mechanical Performance of New Beta Type Titanium Alloy with Low Modulus for Biomedical Applications Relating with Microstructure
- Dynamic Young's Modulus and Mechanical Properties of Ti-Hf Alloys
- PREFACE
- Biologically and Mechanically Biocompatible Titanium Alloys
- 表面硬化処理を施した生体用Zr-20 mass%Nb合金の機械的性質と摩擦摩耗特性
- Nb含有量を変化させた生体用Zr-Nb系合金の機械的性質および生体親和性
- P-3 歯科用Ag-Pd-Cu-Au合金におけるL1_0型規則相と特異硬化(研究奨励賞応募ポスター発表,第58回日本歯科理工学会学術講演会)
- 市販歯科用金銀パラジウム合金の硬さに及ぼす凝固組織と熱処理の影響
- Effect of molecular weight on fatigue characteristics of ultra-high molecular weight polyethylene for implant material
- Fatigue properties of cast Ag-Pd-Cu-Au-Zn alloy for dental applications in the relation with casting defects
- A-8 数値シミュレーションを用いた矯正用圧下スプリングの性能評価(器械・臨床応用,一般講演(口頭発表),第59回日本歯科理工学会学術講演会)
- A-4 高温溶体化処理を施したAg-20Pd-12Au-14.5合金におけるβ'相生成メカニズム(鋳造・金属材料,一般講演(口頭発表),第59回日本歯科理工学会学術講演会)
- Metallic biomaterials
- 数値シミュレーションを用いた矯正用圧下スプリングの性能評価
- 歯科材料のトライボロジー
- Bone Loss and Reduced Bone Quality of the Human Femur after Total Hip Arthroplasty under Stress-Shielding Effects by Titanium-Based Implant
- 歯および歯列寸法のステレオ法による三次元計測に関する研究
- 市販歯科用金銀パラジウム合金のβ相析出に及ぼす凝固および高温溶体化処理の影響
- B-14 アルカリ処理による生体用β型チタン合金へのハイドロキシアパタイト被覆における合金元素の影響(歯科用合金・チタン,一般講演(口頭発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- B-2 有限要素法による矯正用TMA製牽引スプリングの性能評価(臨床応用・数値解析・器械技術,一般講演(口頭発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- 数値シミュレーションを用いた矯正用圧下スプリングの性能評価
- B-8 時効処理を施したAg-20Pd-12Au-14.5Cu合金におけるミクロ組織と硬化(歯科用合金,一般講演(口頭発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- Toughness and Strength of Microstructurally Controlled Titanium Alloys.