Effects of Vacuum Annealing on the Charge-Discharge Characteristics of Eutectic Al-Si/Al Thin Film as Anode Material for Li-Ion Batteries
スポンサーリンク
概要
著者
-
Hung Fei-yi
Institute Of Nanotechnology And Microsystems Engineering Center For Micro/nano Science And Technolog
-
Lui Truan‐sheng
Department Of Materials Science And Engineering National Cheng Kung University
-
Lui T‐s
National Cheng Kung Univ. Tainan Twn
-
Hung Fei-yi
Department Of Material Science And Engineering National Cheng Kung University
-
Wang Chih-hsien
Department Of Materials Science And Engineering National Cheng Kung University
-
Wu Chao-han
Department Of Materials Science And Engineering National Cheng Kung University
-
Lui Truan-sheng
Department Of Material Science And Engineering National Cheng Kung University
-
Hung Fei-yi
Institute Of Nanotechnology And Microsystems Engineering Center For Micro/nano Science And Technolog
-
Hung Fei-yi
Inst. Of Nanotechnology And Microsystems Engineering National Cheng Kung Univ.
関連論文
- Examination of the Tensile Deformation Resistance and Ductility of Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures
- The Charge-Discharge Characteristics of Woody Carbon Modified with Fe_3O_4 Nano Phase Using the Hydrothermal Method
- Microstructural Characteristics and the Charge-Discharge Characteristics of Sn-Cu Thin Film Materials
- Electric Flame-Off Characteristics and Fracture Properties of 20μm Thin Copper Bonding Wire
- Weibull Statistics for Evaluating Failure Behaviors and Joining Reliability of Friction Stir Spot Welded 5052 Aluminum Alloy
- Mechanical Properties and Resonant Characteristics of Friction Stirred AZ31-Mg Alloy
- The Recrystallization of Microelectronic Lead-Free Solders
- Influence of Ga addition on Microstructure, Tensile Properties and Surface Oxide Film Characteristics of Microelectronic Sn-9Zn-xGa Solders
- Microstructures and Fusing Electrical Current of Microelectronic Sn-9Zn-(0.25RE) Solders
- Deformation Fracture Characteristics of Microelectronic Sn-3.0Ag-0.5Cu-xNi Solders
- The Effect of Electrical Current on Tensile Properties and Vibration Characteristics of Sn-9Zn-1Cu Lead-Free Solder
- Electrochemical Characteristics of LiMn_2O_4 (Li/Ni) Cathode Materials
- Recrystallization Effect and Electric Flame-Off Characteristic of Thin Copper Wire
- Thin Film Characteristics of Sn-3.5Ag-(2.0Cu) Alloy
- Phase Transformation of an Austempered Ductile Iron during an Erosion Process
- Effect of Austempering Duration on Erosion Wear Resistance of ADI by Al_2O_3 Particle
- The Microstructural Effects on Tensile Properties and Erosion Wear Resistance in Upper Bainitic ADI Related to Variation in Silicon Content
- Effect of Morphology and Si Content on SiO_2 Particle Erosion of Full Pearlitic Spheroidal Graphite Cast Iron
- Effect of Si Content on SiO_2 Particle Erosion of Spheroidal Graphite Cast Iron
- Effect of Aging on the Crack Propagation Behavior of A356 Alloy under Resonant Vibration
- Two-Step Etching Mechanism of Ag-Si Nanostructure with Various Ag Nanoshape Depositions
- Effect of Revolutionary Pitch on the Microhardness Drop and Tensile Properties of Friction Stir Processed 1050 Aluminum Alloy
- Microstructural Stability of Friction Stirred AA 2218 Alloy on Tensile Properties at Elevated Temperature
- Variation of Microstructure and Electrical Conductivity of Amorphous AgInSbTe and SbTe Films during Crystallization
- Activation Energy of AgInSbTe Film through Isothermal Sheet Resistance Measurements
- Effect of Prior Deformation on Tensile and Vibration Fracture Resistance of Friction Stirred 5052 Alloy
- Effect of Dynamically Recrystallized Grain Size on the Tensile Properties and Vibration Fracture Resistance of Friction Stirred 5052 Alloy
- Pre-Treated Effect of Friction Stir Processing of Al Alloy 5052 on Vibration Fracture Behavior under Resonant Vibration
- Effect of Mg Content on Vibration Fracture Resistance of Friction Stirred Al-Mg Alloys
- Effect of Microstructural Feature on the Deterioration of Tensile Properties and Vibration Fracture Resistance of FSW 5052-H34 Alloy
- Microstructures and the Charge-Discharge Characteristics of Advanced Al-Si Thin Film Materials
- Effect of Maximum Temperature on the Cyclic-Heating-Induced Embrittlement of High-Silicon Ferritic Spheroidal-Graphite Cast Iron
- Effect of Microstructural Refinement on Ductility Deterioration of High Silicon Ferritic Spheroidal Graphite Cast Iron Caused by Cyclic Heating
- Effect of Silicon Content on Intergranular Embrittlement of Ferritic Spheroidal Graphite Cast Iron Suffered from Cyclic Heating
- Effect of Si Content on the Deterioration of Vibration Fracture Resistance of Ferritic SG Cast Iron under an Aqueous Environment
- Effects of Matrix Structure on the Resonant Vibration Behavior of Spheroidal Graphite Cast Iron
- Vibration Fracture Behavior of Sn-Bi Solder Alloys with Various Bi Contents
- Effect of Nodular Graphite on the Deterioration of Vibration Fracture Resistance of Ferritic Cast Iron under an Aqueous Environment
- A Study on Electro-Discharge Machined Surfaces of Ferritic SG Cast Irons
- Effect of Crystallization on the Bonding Strength and Failures of Plasma-Sprayed Hydroxyapatite
- Microstructural Variation and Tensile Properties of a Cast 5083 Aluminum Plate via Friction Stir Processing
- A Comparison of the Microstructural Feature and Bonding Strength of Plasma-Sprayed Hydroxyapatite Coatings with Hydrothermal and Vacuum Post-Heat Treatment
- Effect of Hydrothermal Treatment on Microstructural Feature and Bonding Strength of Plasma-Sprayed Hydroxyapatite on Ti-6Al-4V
- Interfacial Characterization of Porcelain Veneered on the Pure Titanium under Vacuum Firing
- Adherence of Porcelain Veneered on Titanium with an Intermediate Plasma-Sprayed Zirconia Layer
- Effect of Silicon Particles on the EDM Characteristics of Al-Si Alloys
- Embrittlement Mechanism on Tensile Fracture of 7075 Al Alloy with Friction Stir Process (FSP)
- Effect of the Twins on Mechanical Properties of AISI 304 Stainless Steel Wire Using Electrical Current Method
- Effect of Zinc Content on Microstructural Evolution and Electrification-Fusion-Induced Failure Mechanism of Sn-xZn Alloys
- Structural Effects and Charge-Discharge Characteristics of Mg-C/Mg-Li Alloy Thin Film Materials
- Verification of Optimum Temperature on Tensile Ductility Improvement of Friction Stir Processed AZ31 at Warm Temperature Range up to 300℃
- Two cases of massive pleural effusion noted only after induction of anesthesia in living donor liver transplantation
- Crystallization Mechanism and Raman Characteristics of ZnO/In/ZnO Thin Film Using an Electrical Current Method
- The role of eutectic phase and acicular primary crystallized Zn phase on electrification-fusion induced fracture of Sn-xZn solder alloys
- Correlation between Microstructural Stability and Tensile Properties of FSWed Al-Mg-Mn Cast Plate during Subsequent Thermal Exposure
- The Bias-Crystallization Mechanism on Structural Characteristics and Electrical Properties of Zn-In-Sn-O Film
- The Role of Eutectic Phase and Acicular Primary Crystallized Zn Phase on Electrification-Fusion Induced Fracture of Sn-xZn Solder Alloys
- Electromagnetic Interference Shielding Characteristics of Sn-Al Powder Coating Layers
- Microstructural Effects of Zn/Mg Ratio and Post Heat Treatment on Tensile Properties of Friction Stirred Process (FSP) AlxZnyMg Alloys
- Effects of Vacuum Annealing on the Charge-Discharge Characteristics of Eutectic Al-Si/Al Thin Film as Anode Material for Li-Ion Batteries
- Microstructural Features and Erosion Wear Resistance of Friction Stir Surface Hardened Spheroidal Graphite Cast Iron
- Electric Current-Induced Liquation Features of Cast Pure Tin
- Microstructural Effects of Zn/Mg Ratio and Post Heat Treatment on Tensile Properties of Friction Stirred Process (FSP) Al-xZn-yMg Alloys
- Clarification of the Fracture Location in Friction Stir Processed AZ31 Mg Alloy through Examination of Globe and Miniature Specimens
- Microstructural Characteristics of InGaZnO Thin Film : Using an Electrical Current Method
- Effect of 100℃ Heating on Further Ductility Improvement of Friction Stir Processed AZ31 Magnesium Alloy
- Microstructural Characteristics of Electric Discharge Alloyed Layers on Spheroidal Graphite Cast Iron with Different Electrode Materials
- Effects of Vacuum Annealing on the Charge-Discharge Characteristics of Eutectic Al-Si/Al Thin Film as Anode Material for Li-Ion Batteries
- Optoelectronic Properties of Thermally Evaporated ZnO Films with Nanowalls on Glass Substrates
- Electric Current-Induced Liquation Features of Cast Pure Tin
- Microstructures and Mechanical Properties of Austempering Cr-Mo(SCM 435) Alloy Steel
- Optoelectronic Properties of Thermally Evaporated ZnO Films with Nanowalls on Glass Substrates
- Effects of Electrical Current on Microstructure and Interface Properties of Sn-Ag-Cu/Ag Photovoltaic Ribbons
- Effects of Friction Stir Process and Stabilizing Heat Treatment on the Tensile and Punch-Shear Properties of Mg-9Li-2Al-1Zn Magnesium Alloy