Hardware Design of Multi Gbps RC4 Stream Cipher

概要

論文の詳細を見る
Thanks to the achievements in wireless technology, maximum data rate of wireless LAN systems was rapidly increased recently. As a key part of the WEP and the WPA security for the wireless LAN system, throughput of RC4 must be significantly improved also. This paper proposes two high throughput RC4 architectures. The first one is a RAM-based RC4 using a single of 256-byte tri-port RAM to store the S-box. The core generates 4bits of ciphering key per clock cycle. This paper also proves that 4bits/cycle is the maximum throughput can be achieved by a RAM-based RC4 circuit. The second architecture is a Register-based M-byte RC4 that uses a set of registers to store the S-box. It is able to generate multiple bytes of ciphering key per clock cycle, and is proposed as a novel solution for designing extremely high throughput RC4 core for future WLAN systems. Base on this proposal, a 4-byte RC4 core is developed (M=4). The synthesis results in 90nm ASIC show that: As the same throughput's requirement, the proposed RAM-based and Register-based RC4 can respectively save 60% and 50% of power consumption as compare to that of the most recently works. Moreover, the proposed Register-based design is the best candidate for achieving high throughput at low frequency.
The Institute of Electronics, Information and Communication Engineersの論文