The Determination of Tin in Tin Metal and in Zircaloy by Precise Coulometric Titration
スポンサーリンク
概要
- 論文の詳細を見る
The purities of tin metals are determined directly by precise coulometric titration. The sample is dissolved with hydrochloric acid in a nitrogen atmosphere. The solution is then introduced into a hot antimony column. The reduced tin(II) ions are titrated with electrolytically-generated iodine. The titration is accomplished in a special cell by the use of which any disturbance of atmospheric oxygen is avoided. The titration efficiency under these acidic media was decreased when the current density was increased more than several mA/cm<SUP>2</SUP>. The results obtained by two different analysts for the sample of the pure tin metal (5-nine) were 99.996 and 99.991%. The standard deviations of the results were 0.025 and 0.016% respectively. The tin in the other tin metals and in Zircaloy samples was determined satisfactorily without the use of any experimental factor.
- 公益社団法人 日本化学会の論文
著者
-
TANAKA Kazuo
Faculty of Engineering and Institute of Laser Engineering, Osaka University
-
Tanaka Tatsuhiko
Faculty Of Engineering Science University Of Tokyo
-
Yoshida Kazuo
Faculty Of Bioresources Mie University
-
Yoshimori Takayoshi
Faculty Of Engineering Science University Of Tokyo
-
Matsubara Ikuko
Faculty of Engineering, Science University of Tokyo
-
Tanabe Toyokazu
Faculty of Engineering, Science University of Tokyo
関連論文
- Influence of AgCl Precipitates on the Precipitation Titration of Sodium Chloride by Constant-Current Coulometry
- Laser-Induced Shock Compression of Tantalum to 1.7 TPa
- Simultaneous Determination of Phosphorous, Sulfur and Arsenic in Steel by Hydride Generation and Gas Chromatography
- Molecular Characterization of a 313-kb Genomic Region Containing the Self-incompatibility Locus of Ipomoea trifida, a Diploid Relative of Sweet Potato
- Determination of Trace Amounts of Phosphorous in Steel after Preconcentration by Carrier Precipitation and Flotation
- Optimal Control of Vibration by Wind Force on Running Vehicle
- Optimal Active Dynamic Vibration Absorber for Multi-Degree-of-Freedom Systems : Feedback and Feedforward Control Using a Kalman Filter
- Optimal Dynamic Vibration Absorber for Multi-Degree-of-Freedom Systems : Theoretical Consideration in the Case of Random Input
- Optimal Control of Random Vibration by the Use of an Active Dynamic Vibration Absorber : Experimental Considerations on the Effect of the Control with Feedforward Link
- Digital Optimal Control of Elastic Structure Systems (Positioning Control of an Elastic Rotating Arm) : Vibration, Control Engineering, Engineering for Industry
- Optimal Design of Multiple Vibration Controllers for Elastic Beams
- SOURCE CHARACTERISTICS OF THE 1983 NIHONKAI-CHUBU (JAPAN SEA) EARTHQUAKE AND SEISMIC ACTIVITY IN NORTHERN TOHOKU PRECEDING TO THE EARTHQUAKE
- Coulometric Titration of D(+)-Glucose Using Its Enzymatic Oxidation
- Determination of Trace Lead in Copper by Cathodic Stripping Voltammetry
- Investigation of the Drying Conditions for Amidosulfuric Acid
- Cathodic Stripping Voltammetry of Tellurium(IV)at a Rotating Silver Disk Electrode
- Determination of Trace Boron in Iron and Steel by Adsorptive Stripping Voltammetry using Beryllon III
- Determination of Antimony in Steel by Differential Pulse Anodic Stripping Voltammetry at a Rotating Gold Film Electrode
- Determination of Selenium in Stainless Steel by Differential Pulse Cathodic Stripping Voltammetry at a Silver Disk Electrode
- Running Test on Current Collector with Contact Force Controller for High-Speed Railways
- Evaluation and Optimization of Parallel Hybrid Active Dynamic Vibration Absorbers
- H^∞ Control of Transverse-Torsional Coupled Vibrations Using Multiple Active Dynamic Vibration Absorbers
- Estimation of Vibratory Input to Mechanical Structure
- Comparative Law
- DRYING AND WEIGHING OF PRIMARY STANDARD REAGENTS FOR TITRIMETRIC ANALYSIS
- Variation of intensity of environmental gamma-rays measured with Ge(Li) spectrometer.
- Precise coulometric titration of the potassium hydrogen phthalate (NBS-SRM 84d). The use of the Faraday constant as an international standard.
- The Determination of Tin in Tin Metal and in Zircaloy by Precise Coulometric Titration
- Precise complexometric coulometric titration of disodium dihydrogen ethylenediaminetetraacetate dihydrate and aluminium.