Evaluation and simulation of the microstructural changes and embrittlement in 21/4Cr-1Mo steel due to long term service.
スポンサーリンク
概要
- 論文の詳細を見る
Study of the microstructural changes and the embrittlement behaviour of a 21/4Cr-1Mo steel with low impurity content by isothermal aging for periods of up to 10 000 h at 823, 873 and 898 K showed that although grain boundary segregation of phosphorus or other impurity elements were not recognized, considerable reduction in notch toughness occurred due to the microstructural changes associated with the precipitation and coarsening of carbides. It has been shown that the toughness degradation due to long term aging has a linear relationship with the parameter T(log t+8) where T is the aging temperature and t, the aging time. It has also been suggested that step cooling alone is not a viable method of estimating long term embrittlement.Using the above parameter, it ought to be possible to formulate a method by which the microstructural changes and toughness degradation occurring due to long term service of the order 100 000 h could be effectively simulated in the laboratory by heat treatment of a few thousand hours. An illustrative example of simulation of the changes in carbide morphologies, hardness and toughness that occurred in a 21/4Cr-1Mo steel due to 88 000 h service at 813 K has been presented.
- The Iron and Steel Institute of Japanの論文
著者
-
Masumoto Isao
Faculty Of Engineering Nagoya Univ.
-
Hara Takashi
Hitachi Works, Hitachi Ltd.
-
Wignarajah Sivakumaran
IRI Laser Laboratory
関連論文
- Effect of Prestrain and Hammer Peening on Fatigue Strength Improvement of Mild Steel Welded Joint
- Study on the Crack Sensitivity of Mild Steel Welded Joint by Underwater Welding
- Cause of Porosity in Weld Metal Obtained by Moistened Low-Hydrogen Type Electrode
- Microstructure of a 1Cr 1Mo 1/4V Steel after Long Service
- Electron Microscopic Examination of a Service Embrittled 21/4Cr-lMo Steel
- Electromagnetic Welding of Aluminum Tube to Aluminum or Dissimilar Metal Cores (Study on Electromagnetic Welding, Report 1)
- Effect of Peritectic Reaction on the Toughness of As-Solidified Steel
- Sub-zero Welding Process (Report I) : Welding by Utilizing Martensitic Transformation
- Observation of Fracture Surfaces of TRC Test Specimens with Scanning Electron Microscope
- Evaluation and simulation of the microstructural changes and embrittlement in 21/4Cr-1Mo steel due to long term service.