Mg-Al系メカニカルアロイング粉末とマグネシウム合金の圧延による積層接合
スポンサーリンク
概要
- 論文の詳細を見る
Atomized aluminum powder mixed to magnesium alloy (AZ31) turning chips with Mg-12 and 40 mol% Al compositions, were mechanically alloyed (MA) for 54 ks. For the surface improvements of the magnesium alloy, the obtained MA powders of Mg-12 mol% Al (12AlMA) and Mg-40 mol% Al (40AlMA) were stacked on magnesium alloy (AZ31 and AM60) sheets, then hot-rolled at various temperatures. After the roll-bonding, Mg17Al12 phase precipitates from super-saturated α-Mg in 12AlMA powder and it also forms from amorphous phases in 40AlMA powder. The hardness in the bonded MA powder layer becomes higher than as-MA powder particles. When roll-bonding were performed for 12AlMA powder over 400 K and for 40AlMA powder over 480 K, Mg and Al mixed each other by diffusion phenomenon in interface of MA layer and Mg alloy sheet. Fracture strength in 3-point bending of magnesium alloy sheet increases by bonding of MA powder.
- 社団法人粉体粉末冶金協会の論文
- 2005-01-15
著者
関連論文
- 化粧品圧粉体ファンデーションの落下強度の評価(M&P2009機械材料・材料加工部門技術講演会)
- 216 放電プラズマ焼結法を利用した Mg_2Si 粒子分散型マグネシウム押出材の特性
- Mg_2Siの固相合成に及ぼす粉体特性および圧粉条件の影響
- 2914 メカニカルアロイングしたMg-Al合金粉末の型鍛造への応用(S34-2 粉末成形とその評価(2),S34 粉末成形とその評価)
- 2913 メカニカルアロイング粉末を用いて表面改質したマグネシウム合金の摩耗特性(S34-1 粉末成形とその評価(1),S34 粉末成形とその評価)
- 2912 切削チップを用いたメカニカルアロイング粉末による鋳鉄の表面改質(S34-1 粉末成形とその評価(1),S34 粉末成形とその評価)
- Al/Ni混合粉末の半溶融加工で作製した金属間化合物とその高温強度特性
- AI/Ni混合粉末の等速加熱にともなう金属間化合物の生成とその成形
- 6.2.材料加工(6.機械材料・材料加工)(機械工学年鑑)
- 機械材料・材料加工