Bond strength between luting materials and a fiber-reinforced resin composite for indirect restorations.
スポンサーリンク
概要
- 論文の詳細を見る
The purpose of the present study was to evaluate the bond strength between a fiber-reinforced composite (FRC) and six luting agents (Panavia F 2.0, Linkmax MC, Chemiace II, Multibond, Super-Bond C&B, and Fuji I). A prosthodontic resin composite material (RC-control) and a luting agent containing no functional monomer (MT) were used as controls. Shear bond strengths between alumina-blasted FRC and the luting agents were determined after 20,000 thermocycles. The FRC showed superior bond strength when compared with the RC-control. Highest bond strengths were achieved when FRC was bonded with Panavia F 2.0, Linkmax MC, Multibond, Super-Bond C&B, and MT, whereas Chemiace II trailed in the list of resin-based luting agents evaluated. Insufficient bonding was obtained with Fuji I. Results of the present study revealed that when fabricating restorations, the clinician should select an appropriate combination of resin composite material and luting agent so as to ensure the longevity of restorations.
- 日本歯科理工学会の論文
著者
-
ATSUTA Mitsuru
Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University Graduate School of Bio
-
Taira Yohsuke
Department Of Applied Prosthodontics Graduate School Of Biomedical Sciences Nagasaki University
-
Taira Yohsuke
Division Of Applied Prosthodontics Graduate School Of Biomedical Sciences Nagasaki University
-
Taira Y
Nagasaki Univ. Nagasaki Jpn
-
Taira Yohsuke
長崎大学 医歯薬学総合研究科健美補綴学
-
Taira Yohsuke
長崎大学 医歯薬学総合研究科摂食機能回復診断治療学
-
Sawase Takashi
Department Of Applied Prosthodontics Graduate School Of Biomedical Sciences Nagasaki University
-
Sawase Takashi
長崎大学 医歯薬学総合研究科摂食機能回復診断治療学
-
Sawase Takashi
長崎大学 大学院医歯薬学総合研究科健美補綴学
-
Taira Yohsuke
Nagasaki University Graduate School Of Biomedical Sciences Course Of Medical And Dental Sciences Dep
-
Taira Yohsuke
Division Of Fixed Prosthodontics And Oral Rehabilitation Nagasaki University Graduate School Of Biom
-
Taira Yohsuke
Division Of Fixed Prosthodontics And Oral Rehabilitation Nagasaki University Graduate School Of Biom
-
SAWASE Takashi
Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University Graduate School of Bio
-
YANG Lei
Division of Fixed Prosthodontics and Oral Rehabilitation, Nagasaki University Graduate School of Bio
-
Yang Lei
Division Of Applied Prosthodontics Graduate School Of Biomedical Sciences Nagasaki University
-
SAKAI Miyuki
Division of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University
-
Sakai Miyuki
Division Of Applied Prosthodontics Graduate School Of Biomedical Sciences Nagasaki University
-
Shiraishi Takanobu
Division Of Dental And Biomedical Materials Science Graduate School Of Biomedical Sciences Nagasaki
-
Shiraishi Takanobu
Department Of Dental And Biomedical Materials Science Unit Of Basic Medical Sciences Graduate School
-
Shiraishi Takanobu
Department Of Dental Materials Science Nagasaki University School Of Dentistry
-
Atsuta Mitsuru
Division Of Applied Prosthodontics Graduate School Of Biomedical Sciences Nagasaki University
-
Sakai Miyuki
Department Of Applied Prosthodontics Graduate School Of Biomedical Sciences Nagasaki University
-
ATSUTA Mitsuru
Division of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University
-
YANG Lei
Division of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University
-
TAIRA Yohsuke
Division of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University
-
SAWASE Takashi
Division of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University
関連論文
- Shear Bond Strengths of Four Resin Bonding Systems to Two Silica-based Machinable Ceramic Materials
- Effects of Monomer Composition and Original Filler Content on Filler Loading in the Resulting Centrifuged Composites
- Color Stability of Acrylic Resin Adhesives with Different Initiation Modes
- Tarnish resistance evaluation of experimental Pd-free Ag-Au-Pt-Cu dental alloys
- Bond Strength between Four Luting Systems and Enamel Modified with Phosphoric Acid
- Influence of Mechanical Properties of Two Resin Cements on Durability of Bond Strength to Dentin after Cyclic Loading
- Influence of Acid-base Conditioning on the Bond Strength of Five Luting Agents Employing Self-etching Primer to Enamel and Dentin
- A Novel Primer on Dentin Bonding of 4-META/MMA-TBB to Collagen-depleted Dentin
- Adhesion of 4-META/MMA-TBB Resin to Collagen-depleted Dentin : Effect of Conditioner with Ascorbic Acid/Ferric Chloride
- Depth of cure and hardness of an indirect composite polymerized with three laboratory curing units
- A New Laboratory Polymerizing Apparatus Equipped with Halogen and Metal Halide Light Sources
- Effect of noble metal adhesive systems on bonding between an indirect composite material and a gold alloy
- A Nine-year Follow-up of a Porcelain Laminate Veneer Restoration Applied to an Adolescent with Traumatized Dentition : A Clinical Report
- Influence of Centrifugal Force on Filler Loading of Resin Composites
- Twenty-four Hour Bond Strength Between Layers of a Highly Loaded Indirect Composite
- Effectiveness of Bonding Systems on Bonding Durability of a Prefabricated Porcelain Material
- Mechanical Property and Corrosion Resistance Evaluations of Ti-6Al-7Nb Alloy Brazed with Bulk Metallic Glasses
- Comparison of Four Fluoride Etchants in Bonding between Titanium and a Self-curing Luting Agent
- Effect of Ceramic Coating by Aerosol Deposition on Abrasion Resistance of a Resin Composite Material
- Effect of Gold Coating on Interfacial Reaction between Dental Porcelain and Titanium
- The effect of magnesium oxide supplementation to aluminum oxide slip on the jointing of aluminum oxide bars
- Bond strength between luting materials and a fiber-reinforced resin composite for indirect restorations.
- The Physical Properties of a Machinable Resin Composite for Esthetic Restorations
- Two New Monoterpene Glycosides from Ku-Ding-Cha. Inhibitors of Acyl-CoA : Cholesterol Acyltransferase (ACAT)
- Influence of Laboratory Light-curing Unit Variation on Properties of Prosthetic Composites
- Effects of Primers Containing Thiouracil and Phosphate Monomers on Bonding of Resin to Ag-Pd-Au Alloy
- Effect of Four Silane Coupling Agents on Bonding of Two Resin-modified Glass Ionomer Cements to a Machinable Ceramic
- Influence of Light Irradiation Condition on Microshear Bond Strength of Dual-cured Resin Luting Agents
- Hardness Development of Dual-cured Resin Cements through Different Thicknesses of Ceramics
- TEM examination on two types of transformation sequence of checkeboard-like microstructure in Au-Cu-Pd ternary alloys
- Precipitation Hardening in a Dental Low-gold Alloy
- Ordering Behaviors and Age-hardening in AuCu-Zn Pseudobinary Alloys
- Partial phase diagram for the AuCu-Zn pseudobinary system
- Effects of Zn Addition to AuCu on Age-hardening Behaviors at Intraoral Temperature
- Corrosion resistance evaluation of Pd-free Ag-Au-Pt-Cu dental alloys
- Effects of Alumina-blasting and Adhesive Primers on Bonding between Resin Luting Agent and Zirconia Ceramics
- Silane primers rather than heat treatment contribute to adhesive bonding between tri-n-butylborane resin and a machinable leucite-reinforced ceramic
- Effect of experimental acid/base conditioner on microtensile bond strength of 4-META/MMA-TBB resin to dentin after long-term water immersion
- Properties of indirect composites reinforced with monomer-impregnated glass fiber
- Effects of sandblasting, H2SO4/HCl etching, and phosphate primer application on bond strength of veneering resin composite to commercially pure titanium grade 4
- Relationship between chemical selectivity and melting points of reacting molecules.
- Comparative study between laser sintering and casting for retention of resin composite veneers to cobalt-chromium alloy
- Thickness and surface structure of a ceramic layer created on three indirect resin composites with aerosol deposition
- Comparison of four silane primers and an isocyanate primer for bonding of tri-n-butylborane resin to a leucite-reinforced glass ceramic
- A nine-year clinical case study of a resin-bonded fixed partial denture seated on the maxillary anterior teeth.
- Effects of sandblasting, H_2SO_4/HCl etching, and phosphate primer application on bond strength of veneering resin composite to commercially pure titanium grade 4
- Effects of a fluoride etchant and a phosphate primer on bonding of veneering composite to Ti–6Al–4V alloy for CAD/CAM restorations
- Evaluation of a newly developed polymethyl methacrylate powder for brush-dip technique
- Comparative study between laser sintering and casting for retention of resin composite veneers to cobalt-chromium alloy