Precipitation in Beryllium-Iron Alloys
スポンサーリンク
概要
- 論文の詳細を見る
Hardness measurements and microscopic observations by both optical and transmission electron microscopy were carried out mainly on a beryllium-3wt% iron alloy. The alloy was solution-treated at 1150℃, followed by oil-quenching, and aged at 400°to 700℃ for a various time. In the quenched specimens, helices and loops of dislocations were observed. The ageing treatment resulted in climbing of the dislocations and also preferential precipitation on dislocations as well as at grain-, twin-, and sub-boundaries. Although the change in hardness due to ageing was not so large, two different stages were found in the ageing process, and it was considered that the first stage was associated with the climbing of dislocations and preferential precipitation onto dislocations, and the second stage with effective homogeneous precipitation. The composition of precipitates was identified to be Be_<11>Fe, and the crystal structure of the precipitates and their orientation relationship with the matrix were the same as those reported by Rooksby.
- 東北大学の論文
著者
-
Koda Shigeyasu
The Research Institute For Iron Steel And Other Metals
-
Morozumi Shotaro
The Research Institute For Iron Steel And Other Metals
-
TSUNO Nobuo
The Research Institute for Iron, Steel and Other Metals
-
Tsuno Nobuo
The Research Institute For Iron Steel And Other Metals
関連論文
- Direct Observations of the Interaction between Dislocations and Precipitates in an Aluminium-Silicon Alloy
- Precipitation and Generation of Dislocations in an Al-Mg Alloy
- Precipitation in Quenched and Aged Beryllium Containing Small Amounts of Iron
- Some Mechanical Properties of Powder Extrusions of Magnesium Alloys
- Low Temperature Ultrasonic Attenuation in Germanium
- Low Temperature Ultrasonic Attenuation in Cu-Al Alloys
- Low Temperature Ultrasonic Attenuation in Magnesium and Magnesium Alloys
- Ultrasonic Attenuation in Magnesium at Low Temperatures
- Behaviour of Inclusions in Beryllium under Compression at Room Temperature
- Anomalous Change of Electrical Resistivity by Plastic Deformation in a Copper-Germanium Solid Solution Alloy
- Deformation Twinning and Stacking Fault Parameter in Cu-Ni and Cu-Mn Alloys
- The Effect of Plastic Deformation on the Cluster Formation in an Al-Cu 4% Alloy
- The Effect of θ' Phase on the Plastic Deformation of an Age-Hardenable Al-Cu 4% Alloy
- Precipitation and Generation of Dislocations in an Al-Mg Alloy
- Interaction between Dislocations and θ' Precipitates in an Aluminium-Copper Alloy
- Interface Dislocations and Glide Dislocations on θ' Precipitates in an Al-4% Cu Alloy
- Direct Observation of the Interaction of Dislocations with θ' Precipitates in an Aluminium-3.8 wt.-% Copper Alloy
- On the Interaction between Dislocations and Decomposition Products in an Al-4% Cu Alloy
- Direct Observation of the Multiplication of Dislocations in a Thin Foil of an Aluminium-Silver Alloy
- Stacking Faults of Copper-Germanium Alloys
- The Role of the Dislocation Nucleation Around Precipitates in the Mechanical Properties of a Fe-C Alloy
- Precipitation in Beryllium-Iron Alloys
- Effects of neutron irradiation on mechanical properties of iron-nitrogen alloys.