Enhancement of Film Cooling Performance Using a Shaped Film Cooling Hole with Compound Angle Injection
スポンサーリンク
概要
- 論文の詳細を見る
The present study is conducted to investigate the local heat/mass transfer characteristics and local film cooling effectiveness around a conical-shaped film cooling hole with compound angle orientations. The cylindrical hole and two types of shaped hole with conically-enlarged hole exits are used to investigate the effect of film cooling hole geometry. One shaped hole (shaped hole #1) expands 4° in all directions from the middle of hole to the exit. The other shaped hole (shaped hole #2) has the tilted centerline by 4° between the conical and metering holes and is enlarged by 8° to downstream side. The hole area ratios of the exit to the inlet are 2.55 and 2.48,respectively. The film cooling jet is ejected through the single hole, which is inclined at 30° to the surface based on the metering hole. The lateral injection angle is changed from 0° to 90°, and the blowing rates from 0.5 to 2.0. The naphthalene sublimation technique is used to obtain local heat/mass transfer coefficients and adiabatic/impermeable wall film cooling effectiveness around the film cooling hole. For the shaped holes, the penetration of jet is reduced, and higher and more uniform cooling performance is obtained even at relatively high blowing rates because the conically expanded hole exit reduces momentum of the coolant and promotes the lateral spreading. The better cooling performance is obtained with shaped hole #1 due to the uniform diffusion of coolant in the film cooling hole.
- 一般社団法人日本機械学会の論文
- 2001-02-15
著者
-
Rhee Dong
Department Of Mechanical Engineering
-
Cho Hyung
Department Of Mechanical Engineering
-
Kim Byung
Department Of Aerospace Engineering School Of Engineering Nagoya University
-
Kim Byung
Department Of Mechanical Engineering
-
Cho Hyung
Department of Food and Biotechnology, Korea University, Sejong 339-700, Republic of Korea
関連論文
- Lack of Correlation Between QTc Dispersion and Morning Blood Pressure Surge in Recently Diagnosed Essential Hypertensive Patients
- Relationship Between Serum Uric Acid Concentration and Insulin Resistance and Metabolic Syndrome
- Sex Difference in the Relationship Between Insulin Resistance and Corrected QT Interval in Non-Diabetic Subjects
- Study on the Shape Memory Polyamides. Synthesis and Thermomechanical Properties of Polycaprolactone- Polyamide Block Copolymer
- OSTEOLYSIS OF THE DISTAL CLAVICLE IN THE ELITE ROCK CLIMBER : A CASE REPORT(Proceedings of The 8^ Asian Federation of Sports Medicine Congress 2005 Tokyo)
- Interpretation of Wada Memory Test for Lateralization of Seizure Focus by Use of ^Technetium-HMPAO SPECT
- Evaluation of Functional Changes in the Medial Temporal Region During Intracarotid Amobarbital Procedure by Use of SPECT
- Inhibition of Lipid Infusion-Induced Skeletal Muscle Insulin Resistance by Cotreatment With Tempol and Glutathione in Mice
- A DIAGNOSTIC METHOD OF DETECTING OUTLIERS IN TESTING THE EQUALITY OF TWO COVARIANCE MATRICES
- Melastatin-Type transient receptor potential channel 7 is required for intestinal pacemaking activity(Kuriyama Hirosi Award,Program and Abstracts of Papers for 48th Annual Meeting of The Japan Society of Smooth Muscle Research)
- The relationship of TRP channels to the pacemaker activity of interstitial cells of Cajal in the gastrointestinal tract
- Biocompatibility of Surface-Treated Pure Titanium and Ti-6A1-4V Alloy
- Al_2O_3の成形体の徴構造とコロイド/界面の変数の関係
- Pollen of a Male-Sterile Mutant of Arabidopsis thaliana Isolated from T-DNA Insertion Pool is Not Effectively Released from the Anther Locule
- Anti-adhesion molecule therapy in Theoler's murine encephalmyelitis virus-induced demyelinalinating disease
- Clinical usefulness of 18F-FDG PET-CT for patients with gallbladder cancer and cholangiocarcinoma
- Epstein-Barr virus infection, drug resistance and prognosis in Korean T-and NK-cell lymphomas
- Evaluation of Electric Properties for Niobium Capacitors
- Case of minocycline-effective confluent and reticulated papillomatosis with unusual location on forehead
- IS-1 Gastric cancer in Korea(International Session : Gastric cancer)
- Production of Tantalum Powder by External Continuous Supply of Feed Materials and Reductant
- SECOND ORDER LOCAL INFLUENCE IN LINEAR DISCRIMINANT ANALYSIS
- Strategy for XML Integration Using Similarity in Structure and Content(Papers Selected from 2003 International Technical Conference on Circuits/Systems, Computers and Communications(ITC-CSCC 2003))
- The level of tumor necrosis factor-α producing cells in the spinal cord correlates with the degree of Theiler's murine encephalomyelitis virus-induced demyelinating disease
- The effects of the melatonin on ultraviolet-B irradiated cultured dermal fibroblasts
- Utility of i-Steroid-Route to Oxidized Sterol Bound to a Cross-linker:Synthesis of the Steroid Antigen
- BIASED CROSS-VALIDATION IN A KERNEL REGRESSION ESTIMATION
- Characteristic Variation of Niobium Powder Produced under Various Reduction Temperature and Amount of Reductant Addition
- F304 HEAT TRASFER CHARACTERISTIC IN SEPARATED FLOWS CONTROLLED BY ACOUSTIC EXCITATION(Control of turbulent mixing process)
- Holographic PDLC Containing Fluorine Segments
- Melatonin reduces X-ray irradiation-induced oxidative damages in cultured human skin fibroblasts
- Statistical optimization of culture conditions for the production of enniatins H, I, and MK1688 by Fusarium oxysporum KFCC 11363P(MICROBIAL PHYSIOLOGY AND BIOTECHNOLOGY)
- Treatment of median canaliform nail dystrophy with topical 0.1% tacrolimus ointment
- TOTALLY η-UMBILIC HYPERSURFACES IN A NONFLAT COMPLEX SPACE FORM AND THEIR ALMOST CONTACT METRIC STRUCTURES
- Nd:Glass Ring Regenerative Amplifier Using Telescopic Geometry for High Output Energy with Good Beam Quality
- An active contour model with shape regulation scheme
- ねじれ積多様体上の共調和変換
- C201 HEAT TRANSFER AND FLOW CHARACTERISTICS IN A SINGLE ROTATING DISK AND CO-ROTATING DISKS(Heat transfer in complex system-2)
- 3次元接触計量多様体
- Enhancement of Film Cooling Performance Using a Shaped Film Cooling Hole with Compound Angle Injection
- On Doubly Warped Product Manifolds
- 共調和平坦なファイバーリーマン空間
- Reduction of Volume Shrinkage in Holographic Polymer Dispersed Liquid Crystal Based on Epoxy Containing Polymer Matrices
- Effects of dehydroepiandrosterone on collagen and collagenase gene expression by skin fibroblasts in culture
- Favorable Influence of Subclinical Hypothyroidism on the Functional Outcomes in Stroke Patients
- The rigidity for real hypersurfaces in a complex projective space
- On conformally flat twisted product manifolds
- Numerical Study of a Supersonic Jet Impinging on a Flat Plate in a Vacuum
- Density-Aware Scheduling Based on the Exclusive Region in UWB-WPAN Systems
- Synthesis Process of Cobalt Nanoparticles in Liquid-Phase Plasma
- Erratum: ``Focal Adhesion of Osteoblastic Cells on Titanium Surface with Amine Functionalities Formed by Plasma Polymerization''
- Ameliorating effects of anti-DII4 mAb on Theiler's murine encephalomyelitis virus-induced demyelinating disease
- Focal Adhesion of Osteoblastic Cells on Titanium Surface with Amine Functionalities Formed by Plasma Polymerization
- Plasma Surface Modification for Immobilization of Bone Morphogenic Protein-2 on Polycaprolactone Scaffolds
- Plasma Surface Modification for Immobilization of Bone Morphogenic Protein-2 on Polycaprolactone Scaffolds (Special Issue : Advanced Plasma Science and Its Applications for Nitrides and Nanomaterials)
- Losing a tongue tip from an eosinophilic ulcer of the oral mucosa
- The role of estrogen in adipose tissue metabolism: insights into glucose homeostasis regulation [Review]