Criteria for Heated Band Width Based on Through-thickness Temperature Distribution - Numerical Study on Local PWHT of Butt Welded Pipe (Report 1) -

概要

論文の詳細を見る
The heated band width is the most important processing parameter for local postweld heat treatment of tubes and pipes. A correct heated band width must be chosen so that the allowable maximum temperature difference in the soak band is maintained and a sufficient degree of stress relaxation is achieved. In this paper, the effects of the geometrical and the thermal parameters in the postweld heat treatment are investigated using axisymmetric FEM. The most severe condition in which the heat input and insulation are only applied to the outside surface of the pipe has been studied in detail. The effect of the geometrical and the thermal parameters on the through thickness temperature gradients is investigated. Through this study, it is found that the required heated band width is mainly influenced by the wall thickness and the heat transfer coefficient on the internal surface. The computed results show that the H_i number is inadequate for practical use under general conditions. A more general H_i number is proposed as a linear function of the thickness. Further, based on the computed results, the authors propose criteria for the heated band width which includes the effect of the geometrical and the thermal parameters.
社団法人溶接学会の論文
2001-08-05