Gold Alloys for Resin Bonding including Small Amount Base Metals : Structural Changes of Alloy Surface by the High-temperature Oxidation

概要

論文の詳細を見る
To achieve durable bonding with adhesive resin, the surface roughness and the kinds of oxides, respectively to increase mechanical retention to enhance the chemical affinity of adhesive monomer with the gold alloy, were regulated by high-temperature oxidation together with the addition of small amounts of base metals. Alloys containing 2 mass% of Ni, In, or Cr with Cu were oxidized at 800℃ for 20 min in air, pickled in thioglycolic acid, and subsequently oxidized at 500℃ for 10 min in air. The morphology of the internal oxidation zone changed markedly according to the added base metals. Alhough the internal oxide particle composed of only Cu_2O was removed by pickling, NiO, In_2O_3, and chromium oxides could not removed and remained on the alloy surface. The surface roughness was increased by addition of Ni, In, or Cr. Applying the present method can control the roughness and chemical states on a gold alloy surface to increase its adhesive ability with adhesive resins.
日本歯科理工学会の論文