GS(P)-42(GSW0403) Phase Stress Measurement in SiCp/Al2024 under Axial Loading by TOF

概要

論文の詳細を見る
The neutron diffraction method was applied to measure the loading stresses in a monolithic aluminum alloy (A12024) and an aluminum alloy reinforced with silicon carbide particles (SiCp/A12024). Under uniaxial loading, the longitudinal and transverse strains were measured by the time of flight (TOF) method. The lattice strains obtained from several diffraction lines were determined. The strain in the longitudinal direction increased proportionally to the applied stress, while the transverse strain decreased with the applied stress. The elastic constants measured by the neutron method was compared with the value predicted by the kroener model. For the results of monolithic aluminum alloy, the peak intensity of more than 300 counts was required to determine the lattice strain with sufficient reliability. The intensity of A1200 diffraction was high enough to determine the lattice strain in both longitudinal and transverse directions. The elastic constants agreed well with the predicted values. For the composite, the loading stresses in each constituent phase of the aluminum alloy and the silicon carbide particles were measured. Diffractions from SiC006,SiC110 and A1200 were suitable for the determination of the lattice strain. The measured strain were compared with the values predicted by the inclusion models. The measured results close to the predicted values. The macro stress calculated by the rule of mixture agreed very well with applied stress.
一般社団法人日本機械学会の論文
2003-09-09

GS(P)-42(GSW0403) Phase Stress Measurement in SiCp/Al2024 under Axial Loading by TOF

スポンサーリンク

概要

著者

関連論文

スポンサーリンク