反応焼結TiAl金属間化合物の長い疲労き裂および切欠き底からの微小疲労き裂伝ぱ挙動

概要

論文の詳細を見る
Smooth and notched specimens of reactive-sintered Ti-45a%Al-1.6at%Mn intermetallic compound with lamellar and equiaxed γ microstructures were fatigued under cyclic axial tension compression at room temperature. The effect of microstructures on the crack propagation behavior was investigated in comparison with cast Ti-47.2at%Al with larger grain size. Fatigue crack paths were tortuous in the lamellar microstructure in contrast to the straight crack paths in the equiaxed γ microstructure. In comparison with cast TiAl, reactive-sintered TiAl exhibited higher crack propagation rates when compared at the same stress intensity range. The values of stress intensity range at threshold were greater in cast TiAl. Those threshold values had a tendency to increase with the roughness of the fracture surface. The rate of increase in crack opening stress intensity factor at threshold with non-propagating crack length was smaller than that of cast TiAl. Predicted fatigue limits for crack initiation and propagation based on the fatigue-crack-growth resistance-curve method were in agreement with the experimental results. The fatigue limits of notched specimens were smaller than those of cast TiAl in spite of the superior mechanical properties of reactive-sintered TiAl.
社団法人日本材料学会の論文
2000-11-15