超音波による高温細線の浸漬急冷過程の伝熱促進

概要

論文の詳細を見る
The effect of ultrasonic vibration on heat transfer during rapid quenching of 0.3 and 0.5mm dia horizontal platinum wires was studied experimentally using water and ethanol as test liquids. The frequencies of ultrasonic vibration ν were 24 and 44kHz. The power input to the transducer P ranged from 10 to 280W. The falling velocity of the wire was set at 0.6 and 1.0m/s. The initial wire temperature ranged from 500 to 1200K and the liquid subcooling from 40 to 70K. The wall superheat at the first minimum heat flux point (M1 point) initially increased with increasing P and approached a constant value at high P. The heat flux after the M1 point increased considerably due to the application of ultrasonic vibration. The effect of ultrasonic vibration was more significant for ν=24kHz at high subcooling. In order to understand the mechanism of heat transfer enhancement, the distributions of sound pressure and cavitation intensity in the liquid pool were also measured. The heat transfer enhancement showed a close correlation with the effective value of sound pressure.
一般社団法人日本機械学会の論文
1996-11-25