軸圧縮力を付加したゴム膜による円管のバルジ成形

概要

論文の詳細を見る
The authors have developed new equipment for tube bulging which initially puts a deflated rubber membrane into a work tube and drives the internal pressure through a membrane after an initial setting-up. Using this new equipment, the effects of the tube end condition and tube length on the deformed shape and the strain distribution are examined experimentally. Three cases of the tube end conditions of (A) axially fixed, (B) axially free and (C) axially compressed by force are parametrically investigated. The Results are concluded as follows: (1) Comparing at the same bulge height, the internal pressure is lower with the longer tube and also lower with the end condition changing from case A to C, (2) When the tube is short and/or the axial compressive force is small, the deformed shape uppears as a barrel, and when the tube is long and/or the axial force and is large, it has a cylindrical region uniformly expended at its center, and (3) The axial compressive force tends to prevent thickness reduction of the tube.
社団法人日本機械学会の論文
1988-07-25