乾燥摩擦における低温浸硫処理歯車の焼付き強さ

概要

論文の詳細を見る
To clarify the seizure resistance of the gears with the sulphurizing process, which is an anodic sulphurization performed in a molten salt bath with a temperature of about 190℃, four ball tests, two roller tests and gear tests were run under dry friction. Further, the correlation between the three test results on the seizure resistance and the frictional characteristics of the sulphurized layer was estimated. From the test results, it was found that the seizure resistances of the sulphurized balls, rollers and gears were about 2.5-3 times larger than those of un-sulphurized ones. The frictional characteristics of the sulphurated layer in the four ball tests were different from that in the two roller tests, and the variation in the bulk-temperature of the slower roller in the two roller tests was a little different from that of the wheel in the gear tests.
一般社団法人日本機械学会の論文
1990-11-25