A Continuum Mechanics Model for Crack Initiation at Grain-boundary Triple Points in High-temperature Deformation
スポンサーリンク
概要
- 論文の詳細を見る
Typical intergranular cracks often initiate at the grain-boundary triple junction due to blocking of grain-boundary sliding in polycrystalline metallic materials. The theoretical discussion has not fully been made on the nucleation of grain-corner cracks at high temperature where the diffusional recovery occurs. In this study, a continuum mechanics model which incorporates the recovery effect by diffusion of atoms has been developed to explain the initiation of a wedge-type crack during high-temperature deformation. A good correlation is found between the result of calculation based on this model and the experimental result of creep rupture tests on austenite steels. It is found that there is a critical creep rate for wedge-type cracking. The model is also applied to the prediction of rupture life in creep. The direction of deformation periodically changes in fatigue. A discussion is then made on the initiation of a grain-boundary wedge-type crack in high-temperature fatigue where the deformation is path-dependent. The result of calculation based on the present model satisfactorily explains the experimental observations.
- 一般社団法人日本機械学会の論文
著者
-
IIZUKA Hiroshi
Department of Surgery, Funabashi Municipal Medical Center
-
Tanaka Manabu
Department Of Mechanical Engineering Faculty Of Engineering And Resource Science Akita University
-
Tanaka Manabu
Department Of Mechanical Engineering For Production Akita University
-
Tanaka Manabu
Department Of Applied Chemistry Waseda University
-
Iizuka Hiroshi
Department Of Applied Biological Science Faculty Of Science And Technology Science University Of Tok
-
Iizuka Hiroshi
Department Of Mechanical Engineering For Production Akita University
関連論文
- Successful treatmet of an unresectable rectal carcinoma with combined radio-chemo-immunotherapy resulting in complete remission
- Metastatic Malignant Meningioma of the Liver with Hypoglycemia : Report of a Case
- Occult Breast Cancer: A Case Report and Review of the Literature
- BCD-02 INITIATION OF SURFACE CRACK IN CVT RUBBER BELTS(BELT AND CHAIN DRIVES)
- Quantitative Analysis of Three-dimensional Fatigue Fracture Surface Reconstructed by Stereo Matching Method
- Automated Image Processing and Analysis of Fracture Surface Patterns Formed during Creep Crack Growth in Austenitic Heat-Resisting Steels with Different Microstructures
- High Temperature Deformation of Materials with Precipitates : Temperature and Particle Size Dependence of Work Hardening Behavior
- The High-temperature Deformation of Metallic Materials with Ellipsoidal Second-phase Particles
- Microstructures and Properties of High-strength Alloys Severely Deformed by Machining
- Fractal Dimension of Grain-boundary Fracture for Characterization of High-temperature Fracture in Heat-resistant Alloys
- Quantitative Evaluation of the Impact Fracture Surfaces of SS400 Steel by the Three-dimensional Geometrical Analysis
- Microbial Formation of Lumisantonin from (-)-α-Santonin : Studies on Microbial Transformations (XX)
- Fractal Analysis of Fracture Surfaces in Materials Crept at High Temperatures or Fatigued by Repeated Bending
- Change in the Fracture Surface Pattern in the Fracture Process of SUS631 Stainless Steel Fatigued by Repeated Bending
- Facultative Psychrophilic Bacteria Isolated from the Tropical Districts in Indonesia
- Effect of n-Alkanes on Cellular Non-Polar Lipids in Mucor sp.
- Effects of n-Alkanes on Compositions of Cellular Non-Polar Lipids in Aspergillus sp.Isolated from Solid
- Phospholipid Derived from Hydrocarbons by Fungi
- GENERAL CHARACTERISTICS OF YEASTS ISOLATED FROM THE MCMURDO DRY VALLEYS REGION, ANTARCTICA (ABSTRACT) (14th Symposium on Polar Biology)
- CHARACTERIZATION AND HABITATS OF BACTERIA AND YEASTS ISOLATED FROM LAKE VANDA IN ANTARCTICA (Eleventh Symposium on Polar Biology)
- Effect of Carbon Nanotube (CNT) Size on Wear Properties of Cu-Based CNT Composite Electrodes in Electrical Discharge Machining
- Improved Adherence Strength between Diamond Grains and Electrolytic Nickel Bonds by Carbon Nanotube Coatings
- Magnetic Force Microscopy as a New Tool to Evaluate Local Magnetization of Organic Radical Polymers
- Microbiological Production of 20-Carboxy-Pregna-1,4-Dien-3-One from β-Sitosterol with High Yield by a Rhodococcus Species : Studies on Microbial Transformations (XXII)
- SA-06-2(013) Size Distribution of Creep Cracks and Fracture Mechanisms in High-Temperature Materials(Flaw Assessment at Elevated Temperature 1)
- A Continuum Mechanics Model for Crack Initiation at Grain-boundary Triple Points in High-temperature Deformation
- BCD-19 REDUCTION OF EXTENSIONAL STRENGTH OF SYNCHRONOUS BELT CORDS(BELT AND CHAIN DRIVES)
- BCD-17 FATIGUE FAILURE OF SYNCHRONOUS BELTS FOR AUTOMOBILE UNDER FLUCTUATING TORQUE(BELT AND CHAIN DRIVES)
- Candicin, a New Sphingoglycolipid from Hydrocarbon-Assimilating Yeast
- Production of 20-Carboxy-Pregna-1,4-Dien-3-One from Sterols by Mutants of Rhodococcus sp. : Studies on Microbial Transformations (XXIII)
- Microstructures of Cutting Chips of SUS430 and SUS304 Steels, and NCF 750 and 6061-T6 Alloys
- INFLUENCE OF STEROID STRUCTURE ON THE 16α-HYDROXYLATION ACTIVITY OF STEROID BY MICROORGANISM (STUDIES ON MICROBIAL TRANSFORMATIONS.XVII)
- Preparation of Polyhedral Graphite Particles by Arc Discharge under Atmospheric Pressure
- Fluctuation Measurement of Multi-Phase AC Arc and In-Flight Particle Temperature
- Vibration spectra and rotational isomerism of chain molecules. VI. 2-Chloro-, 2-bromo-, and 2-iodoethyl methyl ethers.
- Fractal Analysis of Fracture Surfaces and Simulation of Fracture Process Using Fractal Dimension Maps in Stainless Steels Fatigued by Repeated Bending