Frictional Characteristics of Mineral Oils in Sheet Metal Drawing : 2nd Report, Effects of Additives and Metal
スポンサーリンク
概要
- 論文の詳細を見る
In this report, effects of oiliness improvers and extreme pressure additives on frictional characteristics are examined. Moreover, effects of metal are examined also by changing the sheet metal from aluminium to mild steel. The following has been concluded. (1) Lubricity of oiliness improvers is better than of extreme pressure additives under such conditions of low sliding velocity and low surface pressure as used in this test. (2) Aromatic compound contained in base oils acts as a sort of inhibitor against effects of oiliness improvers and extreme pressure additives. (3) Lubricity of oiliness improvers and extreme pressure additives is excellent when added to a light oil refined highly. (4) Frictional characteristics of mineral oils and additives found in cases of using an aluminium sheet hold all good for cases of using a sheet.
- 一般社団法人日本機械学会の論文
著者
-
Kondo Kazuyoshi
Faculty Of Engineering Shizuoka University
-
Kondo Kazuyoshi
Faculty Of Engineering Nagoya University
-
Nakamura Tamotsu
Faculty Of Engineering Nagoya University.
-
Kawai Nozomu
Faculty Of Engineering Nagoya University.
-
Kawai Nozomu
Faculty Of Engineering Nagoya University
-
Shimizu Isao
Mitsubishi Oil Co. Ltd.
-
Nakamura Tamotsu
Faculty Of Engineering Nagoya University
関連論文
- Investigation into Deep Drawing of Clad Sheet Metals : 2nd Report, On the Optimum Combination Conditions of the Composing Sheets
- Mechanism of Forming the Smooth Sheared Surface in the Shearing Processes : 2nd Report, Proposed Methods for Improvement of the Sheared Surface Quality
- The Basic Rules on the Fracture in Sheet Metal Drawing
- The Effects of Processing Variables on Formability of Aluminium Sheets : 2nd Report, The Effect of Annealing Temperature
- The Effects of Processing Variables on Formability of Aluminium Sheets : 1st Report, The Effect of Cold Reduction
- Fatigue Gauge Utilizing Slip Deformation of Aluminum Foil : Slip Initiation and Surface Roughening Phenomena under Uniaxial Stressing
- Deformation and Strength of Metal over Punch in Sheet Metal Drawing : 1st Report, General Features of the Fracture Behaviour
- Deformation and Strength of Metal over Punch in Sheet Metal Drawing : (2nd Report, Conditions for Increasing the Fracture Force)
- The Frictional Mechanism of Surface of Metals Plastically Deformed : 1st Report, Examination by means of the Sheet Metal Drawing-type Friction Testing Machine
- Frictional Characteristics of Mineral Oils in Sheet Metal Drawing : 2nd Report, Effects of Additives and Metal
- Frictional Characteristics of Mineral Oils in Sheet Metal Drawing : 1st Report, Lubricating Properties of Mineral Base Oils
- The Basic Rules on the Fracture in Sheet Metal Drawing
- Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 2nd Report, Analysis and Considerations for Conditions of Blank-Holding
- The Frictional Mechanism on Surface of Metals Plastically Deformed : 3rd Report, Effects of the Bulk Plastic Deformation on the Frictional Shear Stress
- Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 1 st Report, Fundamentals of Analysis and Results in Case where a Blank-Holder is not Used
- Relationship between Deformation Behaviour and Metal Properties in Sheet Metal Forming : Study of Factors Influencing Drawability and Stretchability of Circular Blanks
- Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 3 rd Report, Prediction of Critical Blank-Holding Pressure
- Seizure Initiation Mechanism in Cold Metalworking Processes (3rd Report, Effect of Oil Film Thickness on Seizure Initiation) : Series C : Vibration, Control Engineering, Engineering for Industry
- Seizure Initiation Mechanism in Cold Metalworking Processes (2nd Report, Estimation of Oil Film Thickness in Extrusion Type Friction Test) : Series C : Vibration, Control Engineering, Engineering for Industry
- Research on Pressure Welding Conditions of Various Work Metals : Effects of Contact Pressure, Surface Expansion Ratio and Temperature
- Press Formability of an Inhomogeneous Sheet Metal
- Research on Precision Die Forging Utilizing Divided Flow : 5th Report, Application to actual machine parts
- Investigations on Cold Die Forging of a Gear Utilizing Divided Flow : 1st Report, Examination of applicable condition for a spur gear
- Research on Precision Die Forging Utilizing Divided Flow : 4th Report, Influence of restricting a centripetal flow
- Research on Precision Die Forging Utilizing Divided Flow : Third report, Study on an optimum combination by 'two step method' proposed anew
- Research on Precision Die Forging Utilizing Divided Flow : Second report, Experimental study of processes utilizing flow relief-axis and relief-hole
- Pressure Lubricated Deep Drawing
- Smoothing Conditions of Workmetal Surface in Metalworking Processes : Effects of Contact Pressure and Relative Slip Displacement
- Research on Precision Die Forging Utilizing Divided Flow : First report, Theoretical analysis of processes utilizing flow relief-axis and relief-hole
- A Seizure Initiation Mechanism in Cold Metalworking Processes : Effect of Tool Surface Roughness on the Critical Oil Film Thickness
- Development of Friction-Assisted Extrusion Process for Producing Thin Metal Strips
- Mechanism of Forming the Smooth Sheared Surface in the Shearing Processes : 1st Report, Fundamental Investigation
- Investigations on Peen Forming : 1st Report, On the basic features of this process
- On the Characteristics of Square Cup Drawing
- Investigation into Deep Drawing of Clad Sheet Metals : 1st Report, On the Interaction of Each Composing Sheet During Deformation
- Investigations on Cold Die Forging of a Gear Utilizing Divided Flow : 2nd Report, Application to a Steel Product and Constructions of Two Step Forging Process : Series C : Vibration, Control Engineering, Engineering for Industry
- Investigaion into a New Forming Process for a Hollow Article with Flange and Its Application : (1st Report, On the Basic Features of the Process)
- Investigation into Deep Drawing of the Square Cup by Cladding
- Symmetry of Products in an Opposed Projection Forging
- Surface Roughening Mechanism of Polycrystalline Metal Sheet during Plastic Deformation : Effect of Strain Path on Surface Topography
- On the Assessment of Lubricity in the Deformation Process by a Strip-ironing Type Friction Testing Machine : Fundamental Considerations and Measurements of Anti-weldability
- A Cousideration of Correlation in Friction Tests for Metal Forming Processes : Series C : Vibration, Control Engineering, Engineering for Industry
- Working Conditions for Improving Pure Stretchability of Sheet Metals : The Effect of Punch Profile
- The Frictional Mechanism on Surface of Metals Plastically Deformed : 2nd Report, Design and Calibration of Drawing-type Friction Testing Machine and Some Preliminary Experiments
- Research on Extrusion Process with Effective Stick Friction : 1st Report, Theoretical Analysis on Forming Thin-Wall Cup : Series C : Vibration Control Engineering Engineering for Industry
- Research on Extrusion Process with Effective Stick Friction : 2nd Report, Experimental Investigation on Forming of Cylindrical Thin-Wall Cup : Series C : Vibration Control Engineering Engineering for Industry