Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 1 st Report, Fundamentals of Analysis and Results in Case where a Blank-Holder is not Used
スポンサーリンク
概要
- 論文の詳細を見る
In this work, examining actual phenomena of wrinkling in deep drawing operations, the mechanism of prevention of wrinkling are clarified. In addition, formulas are induced theoretically to predict the critical conditions of wrinkling in both cases where a blank-holder is not used and where a blank-holder is used. As the first report, fundamentals of analytical method and results in case where a blankholder is not used are reported.
- 一般社団法人日本機械学会の論文
著者
-
Kawai Nozomu
Faculty Of Engineering Nagoya University.
-
Kawai Nozomu
Faculty Of Engineering University Of Shizuoka
-
Kawai Nozomu
Faculty Of Engineering Nagoya University
関連論文
- The Basic Rules on the Fracture in Sheet Metal Drawing
- The Effects of Processing Variables on Formability of Aluminium Sheets : 2nd Report, The Effect of Annealing Temperature
- The Effects of Processing Variables on Formability of Aluminium Sheets : 1st Report, The Effect of Cold Reduction
- Deformation and Strength of Metal over Punch in Sheet Metal Drawing : 1st Report, General Features of the Fracture Behaviour
- Deformation and Strength of Metal over Punch in Sheet Metal Drawing : (2nd Report, Conditions for Increasing the Fracture Force)
- The Frictional Mechanism of Surface of Metals Plastically Deformed : 1st Report, Examination by means of the Sheet Metal Drawing-type Friction Testing Machine
- Frictional Characteristics of Mineral Oils in Sheet Metal Drawing : 2nd Report, Effects of Additives and Metal
- Frictional Characteristics of Mineral Oils in Sheet Metal Drawing : 1st Report, Lubricating Properties of Mineral Base Oils
- The Basic Rules on the Fracture in Sheet Metal Drawing
- Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 2nd Report, Analysis and Considerations for Conditions of Blank-Holding
- The Frictional Mechanism on Surface of Metals Plastically Deformed : 3rd Report, Effects of the Bulk Plastic Deformation on the Frictional Shear Stress
- Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 1 st Report, Fundamentals of Analysis and Results in Case where a Blank-Holder is not Used
- Relationship between Deformation Behaviour and Metal Properties in Sheet Metal Forming : Study of Factors Influencing Drawability and Stretchability of Circular Blanks
- Critical Conditions of Wrinkling in Deep Drawing of Sheet Metals : 3 rd Report, Prediction of Critical Blank-Holding Pressure
- Surface Roughening Mechanism of Polycrystalline Metal Sheet during Plastic Deformation : Effect of Strain Path on Surface Topography
- On the Assessment of Lubricity in the Deformation Process by a Strip-ironing Type Friction Testing Machine : Fundamental Considerations and Measurements of Anti-weldability
- A Cousideration of Correlation in Friction Tests for Metal Forming Processes : Series C : Vibration, Control Engineering, Engineering for Industry
- Working Conditions for Improving Pure Stretchability of Sheet Metals : The Effect of Punch Profile
- The Frictional Mechanism on Surface of Metals Plastically Deformed : 2nd Report, Design and Calibration of Drawing-type Friction Testing Machine and Some Preliminary Experiments