Investigation into Deep Drawing of the Square Cup by Cladding
スポンサーリンク
概要
- 論文の詳細を見る
Influence of cladding on square cup drawability is examined using model clad sheets of hard aluminium and soft one which have remarkably different-drawabilities from each other. Addition of a hard component at the side portion of he horizontal punch contour and addition of the soft component improves the relative critical strength of a hard component at the corner portion of the horizontal punch contour. The draw ability of only the soft component is thus improved remarkably in contour shapes with a small ratio of corner radius to punch size and both hard soft components are improved in ones with a large ratio of corner radius to punch size.
- 一般社団法人日本機械学会の論文
著者
-
Kondo Kazuyoshi
Faculty Of Engineering Nagoya University
-
Hiraiwa Masashi
Faculty Of Engineering Shizuoka University
関連論文
- Investigation into Deep Drawing of Clad Sheet Metals : 2nd Report, On the Optimum Combination Conditions of the Composing Sheets
- Mechanism of Forming the Smooth Sheared Surface in the Shearing Processes : 2nd Report, Proposed Methods for Improvement of the Sheared Surface Quality
- The Basic Rules on the Fracture in Sheet Metal Drawing
- The Effects of Processing Variables on Formability of Aluminium Sheets : 1st Report, The Effect of Cold Reduction
- Deformation and Strength of Metal over Punch in Sheet Metal Drawing : 1st Report, General Features of the Fracture Behaviour
- The Frictional Mechanism of Surface of Metals Plastically Deformed : 1st Report, Examination by means of the Sheet Metal Drawing-type Friction Testing Machine
- Frictional Characteristics of Mineral Oils in Sheet Metal Drawing : 2nd Report, Effects of Additives and Metal
- Frictional Characteristics of Mineral Oils in Sheet Metal Drawing : 1st Report, Lubricating Properties of Mineral Base Oils
- The Basic Rules on the Fracture in Sheet Metal Drawing
- Research on Pressure Welding Conditions of Various Work Metals : Effects of Contact Pressure, Surface Expansion Ratio and Temperature
- Press Formability of an Inhomogeneous Sheet Metal
- Research on Precision Die Forging Utilizing Divided Flow : 5th Report, Application to actual machine parts
- Investigations on Cold Die Forging of a Gear Utilizing Divided Flow : 1st Report, Examination of applicable condition for a spur gear
- Research on Precision Die Forging Utilizing Divided Flow : 4th Report, Influence of restricting a centripetal flow
- Research on Precision Die Forging Utilizing Divided Flow : Third report, Study on an optimum combination by 'two step method' proposed anew
- Research on Precision Die Forging Utilizing Divided Flow : Second report, Experimental study of processes utilizing flow relief-axis and relief-hole
- Pressure Lubricated Deep Drawing
- Smoothing Conditions of Workmetal Surface in Metalworking Processes : Effects of Contact Pressure and Relative Slip Displacement
- Research on Precision Die Forging Utilizing Divided Flow : First report, Theoretical analysis of processes utilizing flow relief-axis and relief-hole
- Development of Friction-Assisted Extrusion Process for Producing Thin Metal Strips
- Mechanism of Forming the Smooth Sheared Surface in the Shearing Processes : 1st Report, Fundamental Investigation
- Investigations on Peen Forming : 1st Report, On the basic features of this process
- On the Characteristics of Square Cup Drawing
- Investigation into Deep Drawing of Clad Sheet Metals : 1st Report, On the Interaction of Each Composing Sheet During Deformation
- Investigations on Cold Die Forging of a Gear Utilizing Divided Flow : 2nd Report, Application to a Steel Product and Constructions of Two Step Forging Process : Series C : Vibration, Control Engineering, Engineering for Industry
- Investigaion into a New Forming Process for a Hollow Article with Flange and Its Application : (1st Report, On the Basic Features of the Process)
- Investigation into Deep Drawing of the Square Cup by Cladding
- Symmetry of Products in an Opposed Projection Forging