Research on Discontinuity of Lubricant Film in Journal Bearings : 1st Report, Bearing Characteristics and Lubricant Film Rupture
スポンサーリンク
概要
- 論文の詳細を見る
There have been presented various boundary conditions for the trailing edge of the lubricant film of journal bearing in the hydrodynamic lubrication theory. They are, however, not so clearly investigated physically in connection with the lubricant film rupture. In this paper, eccentricity ratio and attitude angle are measured, and, at the same time, the generation and growth of the lubricant film rupture are observed by using a transparent journal bearing bushing. The results are investigated with theoretical solutions under various boundary conditions. The shaft center is found to travel along Sommerfeld's theoretical locus in the case of a continuous lubricant film. Then, with occurrence of the lubricant film rupture, the shaft jumps rapidly to the theoretical locus defined with Reynolds' or Gumbel's boundary condition. The theoretical pressure distribution shows that the pressure becomes almost atmospheric in the discontinuous film region. From these results, the conditions of the lubricant film rupture are investigated theoretically.
- 一般社団法人日本機械学会の論文
著者
-
Abe Yasuo
Faculty Of Engneering Kyoto University.
-
FUJITA Yoshio
Faculty of Pharmaceutical Sciences, Kobe Gakuin University
-
Miyata Seiji
Faculty Of Engineering Kyoto University.
-
Fujita Yoshio
Faculty Of Pharmaceutical Sciences Kobe Gakuin University
-
MORI Haruo
Faculty of Engineering, Kyoto University
-
Mori Haruo
Faculty Of Engineering Kyoto University
-
Fujita Yoshio
Faculty Of Engneering Kyoto University.
関連論文
- Studies on the Mechanism of 1,2-Dihydropyrazin-2-one Ring Formation from Dipeptidyl Chloromethyl Ketone and Its Chemical Properties : Immediate Deamination during Catalytic Hydrogenation
- The Structure-Activity Relationship of Dmt-NH-X
- A Study on EHD Squeeze Films between Spherical Planes under Periodic Motion
- Study on Circular EHD Squeeze Films under Periodic Motion
- Research on Discontinuity of Lubricant Film in Journal Bearings : 1st Report, Bearing Characteristics and Lubricant Film Rupture
- The Structure-Activity Relationship of [Dmt^1]Endomorphin-2 Derivatives
- The Structure-Activity Relationship of the Opioidmimetics Containing 2(1H)-Pyrazinone Ring as a Linker and Observation of Deamination during Synthesis
- Design of Opioidmimetics : Dimerization of 2', 6'-Dimethyl-L-Tyrosine
- A Study on a Squeeze Film with a Compliant Plane under Periodic Motion
- Hydrodynamic Lubrication in Seals With Cavitation : 2nd Report, Effect of Cavity Pressure on Leakage
- Hydrodynamic Lubrication in Seals With Cavitation : 3rd Report, Effect of Coning in Radial Face Seal
- Hydrodynamic Lubrication in Seals With Cavitation : 4th Report, Lubricating Film between Tilted Flat Faces
- Hydrodynamic Lubrication in Seals With Cavitation : 1st Report, Effect of Cavity Pressure on Lubricating Film
- Research of Externally Pressurized Porous Thrust Gas-Bearing : With Flat and Solid Ring Surface
- A Rayleigh-Step Face Seal with Reverse Steps
- Theoretical Analysis of Externally Pressurized Porous Journal Gas Bearings : 2nd Report, Journal Bearing with Solid Sleeve Parts
- Theoretical Analysis of Externally Pressurized Porous Journal Gas Bearings : 1st Report
- Influence of the Gas-film Inertia Forces on the Squeeze Damping of an Externally Pressurized, Gas-lubricated Thrust Collar Bearing with Multiple-holes Admission
- Theory of Grease Lubrication of Cylindrical Rooler Bearing
- Effects of Gas Inertia Forces on Dynamic Characteristics of Externally Pressurized Gas-Lubricated Thrust Bearings : Bearing Performance of Externally Pressurized Gas-Lubricated Circular Thrust Bearings with a Single Central Supply Hole in a Choked Conditi
- Influence of the Fluid Inertia Forces on the Dynamic Characteristics of Externally Pressurized Thrust Bearings : 2nd Report, Evaluation of Various Approximate Solutions for the Influence of Film Inertia Forces on the Dynamic Performance of Externally Pres
- Evaluation of Various Approximate Solutions for Effects of Fluid Inertia Forces on Performance of a Plane Inclined Slider Pad
- Influence of Gas Inertia Forces Generated within the Stabilizing Restrictor on Dynamic Characteristics of Externally Pressurized Thrust Gas Bearings : 2nd Report, Case of Turbulent Flow at the Capillary Restriction
- Influence at the Fluid Inertia Forces on the Dynamic Characteristics of Externally Pressurized Thrust Bearings : 1st Report, Influence of the Fluid Inertia Forces Generated at the Restricted Part of Externally Pressurized Circular Thrust Bearings with Cap
- Effects of Gas Inertia Forces on Dynamic Characteristics of Externally Pressurized Gas-Lubricated Thrust Bearings : Evaluation of Various Approximate Solutions under Highly Unsteady Conditions
- On a Controlling Method of Amplitude and Frequency of Self-excited Vibration in an Externally Pressurized, Recessed-type Gas Bearing
- Influence of the Gas-film Inertia Forces on the Dynamic Characteristics of Externally Pressurized, Gas Lubricated Journal Bearings : Part II, Analyses of Whirl Instability and Plane Vibration
- Influence of the Gas-film Inertia Forces on the Dynamic Characteristics of Externally Pressurized, Gas Lubricated Journal Bearings : Part l, Proposal of Governing Equations
- A Study on Characteristics of Externally Pressurized Gas Thrust Bearings with Surface-restriction Compensation : Continued Report ; Dynamic Bearing Characteristics
- A Study on Characteristics of Externally Pressurized Gas Thrust Bearing with Surface-restriction Compensation
- Analysis of Externally Pressurized Thrust Collar Bearings with Slit-Supplies
- Research on Controlled Hydrostatic Bearing (the Journal and the Transactions of the Japan Society of Mechanical Engineers)
- Fundamental Characteristics of an Externally Pressurized Gas-lubricated Journal Bearing with Surface-restriction Compensation
- Fundamental Characteristics of an Externally Pressurized Thrust Gas Bearing with Surface-Restriction Compensation through Triangular Restricting Grooves
- Analysis of an Externally Pressurized Thrust Collar Gas-Bearing with Multiple Supply Holes
- Research on Externally Pressurized Circular Thrust Gas-Lubricated Bearings
- A Study on Angular Stiffness and Damping Properties of Externally Pressurized Gas Thrust Bearing with Surface-restriction Compensation
- A Theoretical Investigation on Hydrostatic Bearing
- Analysis of Whirl Instability in Externally Pressurized Gas Bearings with Circular Slots of Tangential Supply
- Analysis of Stability of Externally Pressurized, Gas Lubricated Floating Bush Journal Bearings
- Theoretical Study of Hydrostatic Thrust Bearings