Influence of the Fluid Inertia Forces on the Dynamic Characteristics of Externally Pressurized Thrust Bearings : 2nd Report, Evaluation of Various Approximate Solutions for the Influence of Film Inertia Forces on the Dynamic Performance of Externally Pres
スポンサーリンク
概要
- 論文の詳細を見る
rights: 本文データは社団法人日本機械学会の許諾に基づきCiNiiから複製したものであるBased on the Navier-Strokes equations in which the pressure is assumed to be constant across the film thickness, various approximate solutions and an exact one for the dynamic performance of externally pressurized infinitely long thrust bearings in a laminar flow regime are presented under the assumption of a small harmonic vibration. From comparison of the approximate solutions with the exact one, it is concluded that some kind of averaging approach in which a part of the time dependent term is treated exactly while the other inertia terms are averaged out across the film thickness gives close approximations in a wide range of designing conditions, and that the other kind of averaging approach in which all the inertia terms including the time dependent term are averaged out across the film thickness gives fairly good approximations.
- 一般社団法人日本機械学会の論文
著者
-
Mori A
Faculty Of Engineering Kyoto University
-
Mori Atsunobu
Faculty Of Engineering Kyoto University
-
Mori H
Faculty Of Engineering Kyoto University
-
Mori Haruo
Faculty Of Engineering Kyoto University
-
Kazamaki Tsuneji
Faculty Of Engineering Toyama University
-
HARUYAMA Yoshio
Faculty of Engineering, Toyama University
-
NAKAMURA Tadayoshi
Honda Motor Co. Ltd.
-
Haruyama Yoshio
Faculty Of Engineering Toyama University
関連論文
- An Investigation of Air-leakage between Contact Surfaces : 3rd Report, On Case in which Cast Iron and Brass were used as Specimen
- A Study on EHD Squeeze Films between Spherical Planes under Periodic Motion
- Study on Circular EHD Squeeze Films under Periodic Motion
- Research on Discontinuity of Lubricant Film in Journal Bearings : 1st Report, Bearing Characteristics and Lubricant Film Rupture
- A Study on a Squeeze Film with a Compliant Plane under Periodic Motion
- Hydrodynamic Lubrication in Seals With Cavitation : 2nd Report, Effect of Cavity Pressure on Leakage
- Hydrodynamic Lubrication in Seals With Cavitation : 3rd Report, Effect of Coning in Radial Face Seal
- Hydrodynamic Lubrication in Seals With Cavitation : 4th Report, Lubricating Film between Tilted Flat Faces
- Hydrodynamic Lubrication in Seals With Cavitation : 1st Report, Effect of Cavity Pressure on Lubricating Film
- Research of Externally Pressurized Porous Thrust Gas-Bearing : With Flat and Solid Ring Surface
- A Rayleigh-Step Face Seal with Reverse Steps
- Study on the Interactioon of Fatigue Crack Propagation in Hybrid Bodies : Series A : Solid-Mechanics, Strength of Materials
- Theoretical Analysis of Externally Pressurized Porous Journal Gas Bearings : 2nd Report, Journal Bearing with Solid Sleeve Parts
- Theoretical Analysis of Externally Pressurized Porous Journal Gas Bearings : 1st Report
- Influence of the Gas-film Inertia Forces on the Squeeze Damping of an Externally Pressurized, Gas-lubricated Thrust Collar Bearing with Multiple-holes Admission
- An Investigation of Air-leakage between Contact Surfaces
- Theory of Grease Lubrication of Cylindrical Rooler Bearing
- Effects of Gas Inertia Forces on Dynamic Characteristics of Externally Pressurized Gas-Lubricated Thrust Bearings : Bearing Performance of Externally Pressurized Gas-Lubricated Circular Thrust Bearings with a Single Central Supply Hole in a Choked Conditi
- Influence of the Fluid Inertia Forces on the Dynamic Characteristics of Externally Pressurized Thrust Bearings : 2nd Report, Evaluation of Various Approximate Solutions for the Influence of Film Inertia Forces on the Dynamic Performance of Externally Pres
- Evaluation of Various Approximate Solutions for Effects of Fluid Inertia Forces on Performance of a Plane Inclined Slider Pad
- Influence of Gas Inertia Forces Generated within the Stabilizing Restrictor on Dynamic Characteristics of Externally Pressurized Thrust Gas Bearings : 2nd Report, Case of Turbulent Flow at the Capillary Restriction
- Influence at the Fluid Inertia Forces on the Dynamic Characteristics of Externally Pressurized Thrust Bearings : 1st Report, Influence of the Fluid Inertia Forces Generated at the Restricted Part of Externally Pressurized Circular Thrust Bearings with Cap
- Effects of Gas Inertia Forces on Dynamic Characteristics of Externally Pressurized Gas-Lubricated Thrust Bearings : Evaluation of Various Approximate Solutions under Highly Unsteady Conditions
- On a Controlling Method of Amplitude and Frequency of Self-excited Vibration in an Externally Pressurized, Recessed-type Gas Bearing
- Influence of the Gas-film Inertia Forces on the Dynamic Characteristics of Externally Pressurized, Gas Lubricated Journal Bearings : Part II, Analyses of Whirl Instability and Plane Vibration
- Influence of the Gas-film Inertia Forces on the Dynamic Characteristics of Externally Pressurized, Gas Lubricated Journal Bearings : Part l, Proposal of Governing Equations
- A Study on Characteristics of Externally Pressurized Gas Thrust Bearings with Surface-restriction Compensation : Continued Report ; Dynamic Bearing Characteristics
- A Study on Characteristics of Externally Pressurized Gas Thrust Bearing with Surface-restriction Compensation
- Analysis of Externally Pressurized Thrust Collar Bearings with Slit-Supplies
- Research on Controlled Hydrostatic Bearing (the Journal and the Transactions of the Japan Society of Mechanical Engineers)
- Fundamental Characteristics of an Externally Pressurized Gas-lubricated Journal Bearing with Surface-restriction Compensation
- Fundamental Characteristics of an Externally Pressurized Thrust Gas Bearing with Surface-Restriction Compensation through Triangular Restricting Grooves
- Analysis of an Externally Pressurized Thrust Collar Gas-Bearing with Multiple Supply Holes
- Research on Externally Pressurized Circular Thrust Gas-Lubricated Bearings
- A Study on Angular Stiffness and Damping Properties of Externally Pressurized Gas Thrust Bearing with Surface-restriction Compensation
- A Theoretical Investigation on Hydrostatic Bearing
- Analysis of Whirl Instability in Externally Pressurized Gas Bearings with Circular Slots of Tangential Supply
- Analysis of Stability of Externally Pressurized, Gas Lubricated Floating Bush Journal Bearings
- Theoretical Study of Hydrostatic Thrust Bearings