浸炭素表面硬化鋼における疲労強度と硬度分布の関係
スポンサーリンク
概要
- 論文の詳細を見る
The rotating bending fatigue tests were performed on the carburized SCM21 steel specimes, and the relation between the fatigue strength and the case hardness distribution was examined on two series of specimens having different hardness distributions. The plain and notched specimens were carburized at 930℃, under 0.9% carbon potential atmosphere for 4 hrs, and oil-quenched from 830℃ Tempering was carried out at 180℃ for 2 hrs. The results obtained are as follows. (1) In the case of the plain specimen with a gradual stress gradient, fatigue damage seems to progress in a wide field of the carburized layer. So the initiation of fatigue cracks may occur either on the surface or inside of the carburized layer. The present test results show that the fatigue cracks initiate on the surface of the carburized layer, and the specimen having higher case hardness possesses lower fatigue strength than the one of lower case hardness. (2) In the case of the notched specimen with a steep stress gradient, the progress of fatigue damage is limited to the notch root portion or the crack tip. So the crack initiating stress σ_<w2> and the crack propagating stress σ_<w2> of the specimen seem to be decided by the hardness and the residual stress of the critical portion where the fatigue fracture occurs. The present test results show that the fatigue crack initiating stress of the notched specimens is related to the effective case depth. The fatigue crack propagating stress of the notched specimen is proportional to the hardness of the crack tip, and the stress range between σ_<w1>and σ_<w2> is almost constant for both series of the specimens having different effective case depth.
- 社団法人日本材料学会の論文
- 1979-02-15
著者
関連論文
- 切欠き材の疲労強度に及ぼす切欠き傾斜角度の影響
- 焼入れ焼もどしした高硬度鋼の疲労特性と硬さの関係
- 球圧子の押込硬さ試験方式を利用した高分子材料の変形抵抗 : ひずみ特性測定法
- 高周波表面硬化した鋼の疲労限度に及ぼすゆるい切欠きの効果
- 球圧子の押込み硬さ試験方式を利用した高分子材料のヤング率測定法
- 球圧子による反発硬さ理論 : 反発硬さ数に及ぼす圧子・試料条件の影響
- 高周波表面硬化した S45C 鋼の回転曲げ疲れ限度に及ぼす心部硬さ及び切欠形状の影響
- 熱衝撃き裂と応力拡大係数の関係及びストレッチ・ゾーン幅の変化
- 534 高周波表面硬化した鋼の疲労特性に及ぼす硬化深さと切欠形状の影響(疲労・腐食疲労・高温疲労, 材料, 日本鉄鋼協会第 109 回(春季)講演大会)
- 620 高周波表面硬化材の回転曲げ疲労特性に及ぼす硬化深さの影響(疲れ・遅れ破壊・非磁性鋼・レール, 性質, 日本鉄鋼協会第 102 回(秋季)講演大会)
- 浸炭表面硬化鋼の疲労特性に及ぼす硬化層の組織と炭素量の影響
- 浸炭表面硬化した鋼の回転曲げ疲労特性に及ぼす浸炭深さと切欠き形状の影響
- 550 浸炭表面硬化した鋼の疲労特性に及ぼすサブゼロ処理, 硬化層中の残留オーステナイトおよび炭素含有量の影響(線材・疲れ, 性質, 日本鉄鋼協会 第 98 回(秋季)講演大会)
- 浸炭表面硬化した鋼の機械的性質におよぼす素材の化学組成および熱処理条件の影響について
- 浸炭素表面硬化鋼における疲労強度と硬度分布の関係
- 343 疲労強度に及ぼす浸炭後の熱処理の影響(疲れ, 性質, 日本鉄鋼協会 第 98 回(秋季)講演大会)
- 342 浸炭表面硬化した鋼の回転曲げ疲労挙動に及ぼす浸炭深さの影響(疲れ, 性質, 日本鉄鋼協会 第 98 回(秋季)講演大会)
- ころがり接触疲労のX線的研究
- 浸炭表面硬化鋼における疲労き裂の発生, 進展および停留に及ぼす切欠き深さの効果
- 17Cr-7Ni ステンレス鋼の組織, Ms 点および機械的性質に及ぼす Al と C 含有量の影響について(ステンレス鋼)
- ころがり接触疲労破損の電子顕微鏡による破面解析
- 1-25 浸炭表面硬化鋼における疲労き裂の発生, 進展および停留におよぼす切欠き深さの効果
- 滲炭表面硬化した鋼の疲労き裂の進展について
- 1-33 滲炭表面硬化した鋼の疲れき裂の進展について
- Al を含む低 Ni 強力ステンレス鋼の時効硬化について
- 187 AL を含む低 Ni ステンレス鋼の時効硬化について(超合金, 性質, 日本鉄鋼協会第 77 回(春季)講演大会講演)
- 軌條鋼のフラツシ・バツト熔接後の熱処理(第 2 報) : 曲げ試驗と疲労試驗
- 軌條鋼のフラツシ、バツト熔接後の熱処理(第 1 報)
- 音響信号を利用した液面レベルと傾斜角度の測定