2段2重重複繰返曲げ応力に対する硬鋼線の疲労特性

概要

論文の詳細を見る
The present writers have investigated about the property of fatigue damage of hard drawn steel wire and the fatigue property under double repeated bending stress in two stress levels. For the testing materials, 0.6% carbon steel drawn with three reductions of 25%, 50% and 85% were used and their diameters were 2.5 mm. The principal results of this investigation can be summarized as follows : (1) When the 10% over primary stress is loaded to lower cycles than the maximum cycle of no fatigue damage n_d, the fatigue limits of wires drawn with reductions of 50% and 85% increase slightly. And when that primary stress is loaded to higher cycles than n_d, the fatigue limits of all wires decrease and those decrements decrease with the increase of the reduction by drawing. (2) When the 10% over primary stress is loaded to lower cycle than n_d, the cumulative cycle ratio Σ(n/N) exceeds unity in both cases of secondary stress is larger and smaller than primary stress. And when that primary stress is loaded to higher cycles than n_d, the cumulative cycle ratio exceeds unity or nearly equals unity (3) When the 5% under primary stress is loaded to 10^6 or 10^7 cycles, the fatigue limits of all wires increase slightly and those increments increase with the increase of the reduction by drawing.
社団法人日本材料学会の論文
1964-02-15