溶融 Zn 浴中ドロスの存在状態
スポンサーリンク
概要
- 論文の詳細を見る
A study was conducted on the formation of Zn-Fe and Fe-Al crystals in a molten Zn bath. Baths similar in composition to that of a CGL, were prepared in the laboratory and attention was paid on the cooling rate in Zn bath sampling. When samples were cooled at lower cooling rates than 100℃/s, crystallization and crystal growth were observed in the Zn bath sample ingots. Higher cooling rates than 10^5℃/s inhibited the crystallization and crystal growth during cooling. In order to evaluate the presence of crystals in the Zn bath, it is necessary to employ a rapid cooling. The type of crystal changed with the Al content of the bath. In a bath containing above 0.13mass% Al, Fe_2Al_5 formed. Below 0.13mass%, FeZn_7 formed. From the results obtained with the rapid cooling technique, an equilibrium solubility curve for Fe and Al was estimated in the region where Fe_2Al_5 was crystallized. The curve was expressed as Log[Fe]^2[Al]^5=5.37-9354/T for Fe+5/2Al=1/2Fe_2Al_5. With this equation, the available Zn-Al-Fe ternary phase diagram in the literature was corrected at the Zn corner.
- 1995-08-01
著者
-
加藤 千昭
JFEスチール(株)スチール研究所
-
加藤 千昭
川崎製鉄(株)技術研究所
-
加藤 千昭
Jfeスチール スチール研
-
高村 日出夫
川崎製鉄(株)技術研究所
-
望月 一雄
川崎製鉄(株)技術研究所
-
望月 一雄
川崎製鉄株式会社技術研究所表面処理研究部門
-
望月 和雄
川崎製鉄(株)技術研究所
-
森戸 延行
川崎製鉄(株)鉄鋼研究所
-
森戸 延行
川鉄テクノリサーチ(株)分析・評価事業部
-
望月 一雄
川崎製鉄(株)
-
望月 一雄
川崎製鉄(株)本社薄板セクター室
関連論文
- チタン/ポリウレタン複合重防食鋼矢板の接着耐久性に及ぼすチタン層付与の影響
- 合金化溶融亜鉛めっき鋼板の接着性に及ぼす表面酸化物の影響
- 自動車用高機能表面処理鋼板 (特集 自動車材料の最新技術動向)
- 表面処理鋼板におけるこの10年の進歩
- 自動車用高潤滑表面処理鋼板--プレス成形性に優れた合金化溶融亜鉛めっき鋼板 (自動車用製品とその利用技術特集号)
- 合金化溶融亜鉛めっき鋼板の摺動性に及ぼす表面組成の影響 : 合金化溶融亜鉛めっき鋼板のプレス成形性-第3報
- プレフォス処理した合金化溶融亜鉛めっき鋼板の摺動特性
- 表面処理
- 車体軽量化に貢献する合金化溶融亜鉛めっき高強度鋼板の開発
- 環境に適応した燃料タンク用鋼板の諸特性