Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu-Sn Alloy Manufactured by Continuous Draw Bending
スポンサーリンク
概要
- 論文の詳細を見る
- 2012-01-01
著者
-
Tsuji Nobuhiro
Department Of Adaptive Machine Systems Graduate School Of Engineering Osaka University
-
Yanagimoto Jun
Institute Of Industrial Science The University Of Tokyo
-
Tsuji Nobuhiro
Graduate School Of Engineering Dep. Of Materials Sci. And Engineering Kyoto Univ.
-
Yanagimoto Jun
Inst. Of Industrial Sci. The Univ. Of Tokyo
-
Tokutomi Junichiro
Yazaki Technology Center Yazaki Corporation
-
Tsuji Nobuhiro
Department Of Materials Science And Engineering Graduate School Of Engineering Kyoto University
-
Hanazaki Kenichi
Yazaki Technology Center, Yazaki Corporation
関連論文
- Finite Element Analysis of Tilting of Metal in Bar Rolled with Three-roll Mill
- Friction Stir Welding of Ultrafine Grained Interstitial Free Steels
- Finite-Element Analysis of Metal Flow in Bearing Section during Extrusion Process of "L" "C" and "T" Sections - Combination of Three-Dimensional FE Simulation and Extrusion Die Design-2 -
- Finite-Element Analysis of Metal Flow in Bearing Section during Extrusion Process of Rectangular and Angle Sections - Combination of Three-Dimensional FE Simulation and Extrusion Die Design-1 -
- Mechanical Bonding Process to Manufacture Clad Materials-Divided Flow Bonding
- The Analysis of Phase Transformation for the Prediction of Microstructure Change after Hot Forming
- Analytical and Experimental Investigations into Microstructure Evolution in Hot Bar Stretching
- Microstructure Evolution in Pure Al Processed with Twist Extrusion
- Formation of Ultrafine Grained Structure in Carbon Steels without Severe or Heavy Plastic Deformation
- Densification and Structural Evolution in Spark Plasma Sintering Process of Mechanically Alloyed Nanocrystalline Fe-23Al-6C Powder
- Interdiffusion in Co Solid Solutions of Co-Al-Cr-Ni System at 1423K
- Transformation in Stir Zone of Friction Stir Welded Carbon Steels with Different Carbon Contents
- Fatigue Crack Propagation Behavior in Commercial Purity Ti Severely Deformed by Accumulative Roll Bonding Process
- Grain Boundary Structure of Ultrafine Grained Pure Copper Fabricated by Accumulative Roll Bonding
- Change in Microstructure and Texture during Annealing of Pure Copper Heavily Deformed by Accumulative Roll Bonding
- Toughness of Ultrafine Grained Ferritic Steels Fabricated by ARB and Annealing Process
- Yield Strength of Ultrafine Grained Metallic Materials Fabricated by Severe Plastic Deformation
- Flow Curve Determination for Metal under Dynamic Recrystallization Using Inverse Analysis
- Nanostructured Aluminum and IF Steel Produced by Rolling-a Comparative Study
- Through-Thickness Characterization of Microstructure and Texture in High Purity Aluminum Processed to High Strain by Accumulative Roll-Bonding
- Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding
- Deformation Microstructure and Nucleation of Recrystallization in Hot-deformed Single Crystals of 18% Cr Ferritic Steel
- Regression Method of Determining Generalized Description of Flow Curve of Steel under Dynamic Recrystallization
- Strengthening of Sheath-Rolled Aluminum Based MMC by the ARB Process
- FE-based Analysis for the Microstructure Evolution in Hot Bar Rolling
- Numerical Analysis for the Prediction of Microstructure after Hot Forming of Structural Metals
- Measurement of Ductile Forming Limit in Non-linear Strain Paths and Anisotropic Yield Conditions for 11% Cr Steel Sheets
- Effect of the Number of Work-roll Surface Division on Prediction of Contact Length in Coupled Analysis of Roll and Strip Deformation during Sheet Rolling
- Three-dimensional Numerical Analysis of Microstructural Evolution in and after Bar and Shape Rolling Processes
- Continuous Heating System Using Electric Resistance Heating for the Hot Rolling of Stainless Steels
- Combined Macro-Micro Modeling for Rolling Force and Microstructure Evolution to Produce Fine Grain Hot Strip in Tandem Hot Strip Rolling
- Ferrite Nucleation Kinetics inside Austenite Grain
- Incremental Formulation for the Prediction of Microstructural Change in Multi-pass Hot Forming
- Superplasticity of Ultra-Fine Grained Al-Mg Alloy Produced by Accumulative Roll-Bonding
- Effect of Vanadium and Niobium on Restoration Behavior after Hot Deformation in Medium Carbon Spring Steels
- Change in Mechanical Properties and Microstructure of ARB Processed Ti during Annealing
- Effect of Boron Addition on the Microstructure of Hot-deformed Ti-added Interstitial Free Steel
- Micrastructure and Texture of Commercial Purity Aluminum Strips Produced by Melt Direct Rolling
- Effect of Aging Treatment on Ultra-Fine Grains and Si-Phase in Al-0.5%Si Alloy Fabricated by ARB Process
- Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu-Sn Alloy Manufactured by Continuous Draw Bending
- Interrupt Shearing Test for Evaluating Effect of Large Shear Deformation on Evolution of Microstructure into Ultrafine Grains
- Comparative Analysis of Plastic Flow and Grain Refinement in Pure Aluminium Subjected to Simple Shear-Based Severe Plastic Deformation Processing
- Effect of Deformation Temperature on Microstructure Evolution in ARB Processed Ultralow Carbon IF Steel
- Microstructural Evolution during ARB Process of Al-0.2 mass% Sc Alloy Containing Al_3Sc Precipitates in Starting Structures
- Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe-24Ni-0.3C Alloy
- Multistage and High-speed Compression Testing Machine for Obtaining Flow Stress and Microstructure Evolution in Hot Forming of Steels
- Texture Evolution in Al-0.2 mass%Sc Alloy during ARB Process and Subsequent Annealing
- Application of Recrystallization Texture Evolution Model to Type 430 Stainless-Steel strip Production
- Effect of Initial Orientation on the Recrystallization Behavior of Solidified Columnar Crystals in a 19% Cr Ferritic Stainless Steel.
- Experiments on and Finite Element Analyses of the Tilting of Fine Steel Wire in Roller Die Drawing
- Microstructural and Crystallographic Features of Hydrogen-related Crack Propagation in Low Carbon Martensitic Steel
- Effect of Initial Orientation on the Cold Rolling Behavior of Solidified Columnar Crystals in a 19%Cr Ferritic Stainles Steel.
- Improvement in Mechanical Properties of a Cu-2.0 mass%Ni-0.5 mass%Si-0.1 mass%Zr Alloy by Combining Both Accumulative Roll-Bonding and Cryo-Rolling with Aging