Transformation in Stir Zone of Friction Stir Welded Carbon Steels with Different Carbon Contents
スポンサーリンク
概要
- 論文の詳細を見る
Five types of ferrite–pearlite structure carbon steels with different carbon contents (IF steel, S12C, S20C, S35C, S50C) were friction stir welded under various welding conditions, and the mechanical properties and microstructures of the FSW carbon steel joints were evaluated. Compared with IF steel, the microstructures and mechanical properties of the carbon steel joints are significantly affected by the welding conditions. When the carbon content is less than or equal to 0.12 mass%, the welding produces ferrite–pearlite structures, and the strength slightly increases compared to the base metal due to the refined microstructure; when the carbon content is above 0.2 mass%, the welding produces ferrite–pearlite plus harder phases like the martensite and bainite microstructures, resulting in a significantly increased strength of the joints. These are dependent on each of the thermal-mechanical cycles.
- 2007-02-15
著者
-
NAKATA Kazuhiro
Joining and Welding Research Institute, Osaka University
-
藤井 英俊
大阪大学接合科学研究所
-
FUJII Hidetoshi
Joining and Welding Research Institute, Osaka University
-
NOGI Kiyoshi
Joining and Welding Research Institute, Osaka University
-
Fujii Hidetoshi
Joining And Welding Research Institute Osaka University
-
Nogi Kiyashi
Osaka University
-
Nogi K
Joining And Welding Research Institute Osaka University
-
Nogi Kiyoshi
Osaka Univ. Osaka Jpn
-
TSUJI Nobuhiro
Department of Adaptive Machine Systems, Osaka University
-
Nakata Kazuhiro
Joining And Welding Research Institute Osaka University
-
Nogi Kiyoshi
Joining And Welding Researc Institute Osaka University
-
Tsuji Nobuhiro
Department Of Adaptive Machine Systems Graduate School Of Engineering Osaka University
-
Nakata Kazuhiro
Joining And Welding Res. Inst. Osaka Univ.
-
CUI Ling
Joining and Welding Research Institute, Osaka University
-
IKEDA Rinsei
Steel Research Laboratory, JFE Steel Corporation
-
MATSUSHITA Muneo
Steel Research Laboratory, JFE Steel Corporation
-
Cui Ling
Joining And Welding Research Institute Osaka University
-
Ikeda Rinsei
Steel Research Laboratory Jfe Steel Corporation
-
Tsuji Nobuhiro
Graduate School Of Engineering Dep. Of Materials Sci. And Engineering Kyoto Univ.
-
Matsushita Muneo
Steel Research Laboratory Jfe Steel Corporation
関連論文
- Metal Vapor Behavior in GTA Welding of a Stainless Steel Considering the Marangoni Effect
- 摩擦攪拌接合によるZr基金属ガラス/純Alの異材接合
- 低放射化フェライト鋼F82Hとオーステナイト系ステンレス鋼の重ね異材摩擦攪拌接合
- 高温材料の接合に向けたIr系摩擦攪拌接合ツールの開発
- 7. 溶融池中の対流に及ぼす4つの駆動力(プラズマ気流,電磁気力,表面張力,浮力)の影響(微小重力環境を利用したプラズマプロセスへの誘い)
- 303 二重シールドTIG溶接における溶込みに及ぼすシールドガスの影響 : AA-TIG用シールドガスの開発(アーク溶接(I),平成18年度春季全国大会)
- 220 GTA溶融池形状に及ぼすシールドガス組成と溶接パラメータの影響(アーク現象(I))
- 第1章 溶接法および機器(1-5)FSW (溶接接合教室--基礎を学ぶ)
- 219 高張力薄鋼板の摩擦攪拌接合(FSW)技術の開発(第1報) : 適正接合条件の検討(FSW(II),平成20年度秋季全国大会)
- Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
- FSW継手の攪拌部の組織
- 炭素鋼のレーザハイブリッド摩擦攪拌接合 (特集 最新のレーザ利用研究)
- FSW(摩擦攪拌接合) : 鉄鋼材料を中心に(レビュー&トレンド)
- オーステナイト系ステンレス鋼の高品質・高速度摩擦攪拌接合(溶接・接合)
- 135 Ni基合金の摩擦攪拌接合特性(FSW(VI),平成20年度秋季全国大会)
- 203 液体CO_2を用いた炭素鋼摩擦攪拌接合継手の組織制御(FSW(I),平成20年度秋季全国大会)
- 220 高張力薄鋼板の摩擦攪拌接合(FSW)技術の開発(第2報) : 590〜1180N/mm^2級高張力鋼の継手特性(FSW(II),平成20年度秋季全国大会)
- 221 レーザハイブリッド摩擦攪拌接合継手の微細組織に及ぼす接合条件の影響(FSW(II),平成20年度秋季全国大会)
- 401 Zr_Cu_Ni_5Al_金属ガラスの摩擦攪拌接合(金属ガラス,平成20年度秋季全国大会)
- 416 鉄鋼材料のMIG溶接における溶融池の酸素量と溶込み深さの関係(アーク現象(II),平成20年度秋季全国大会)
- 224 オーステナイト系ステンレス鋼の摩擦攪拌接合における高効率化(FSW(III),平成20年度秋季全国大会)
- 217 過共析鋼の無変態摩擦攪拌接合(FSW(II),平成20年度秋季全国大会)
- 216 摩擦攪拌プロセスによる工具鋼の組織微細化(FSW(IV),平成20年度春季全国大会)
- 214 オーステナイト系ステンレス鋼の高品質・高速度摩擦攪拌接合(FSW(IV),平成20年度春季全国大会)
- 205 レーザハイブリッドFSW継手の機械的特性に及ぼす接合条件の影響(FSW(II),平成20年度春季全国大会)
- 204 摩擦攪拌処理した鋳鉄の表面特性に及ぼすツール角度の影響(FSW(II),平成20年度春季全国大会)
- チタン合金の摩擦攪拌接合(チタン及びその合金の溶接・接合,構造物の軽量化に寄与する非鉄金属材料の溶接・接合最前線,平成20年度春季全国大会)
- 摩擦攪拌プロセスによる鋳鉄の表面硬化
- 摩擦攪拌接合時のギャップの影響と摩擦攪拌粉末プロセス (FSPP) による継手特性の向上
- 無酸素銅とアルミニウムの摩擦攪拌異材接合継手の機械的性質
- 403 摩擦攪拌プロセスを用いた部分複合化のメカニズム(FSW (I))
- 333 C1020/A1050の摩擦攪拌接合(FSW (V),平成18年度春季全国大会)
- C1020/A1050の摩擦攪拌接合
- 摩擦攪拌接合を行った2相ステンレス鋼の組織観察
- TWIP鋼の室温引張特性に及ぼす平均結晶粒径の影響
- 211 TWIP鋼の摩擦攪拌接合(FSW (II),平成18年度春季全国大会)
- 247 マルテンサイト法により作製した超微細粒低炭素鋼の摩擦攪拌接合(摩擦撹拌接合(II))
- 球面ツールを用いたアルミ/鋼の摩擦攪拌点接合継手の機械的性質
- 310 レーザハイブリッドFSWによる炭素鋼の高速・高強度接合(FSW(III),平成19年度秋季全国大会)
- 309 複動式摩擦攪拌接合における継手の機械的特性に対するショルダ及びプローブ回転速度の影響(FSW(III),平成19年度秋季全国大会)
- 液体CO_2を用いた炭素鋼の摩擦攪拌接合継手の組織および機械的性質
- A Two-step Rotation Bonding of 6061Al and 5052 Al Alloys
- 摩擦攪拌を利用したオーステナイト系ステンレス鋼の表面改質
- 高強度Ir系摩擦攪拌接合ツールの開発
- 厚鋼板の摩擦攪拌接合における撹拌部の組織および靭性
- 溶射超硬合金層の機械的特性に及ぼす摩擦攪拌プロセス条件の影響
- レーザクラッディング層への摩擦攪拌プロセスによるナノ工具鋼被膜の創製
- ベイズ推定とニューラルネットワークの組み合わせによる溶接部の特性評価 (2)
- ベイズ推定とニューラルネットワークの組み合わせによる溶接部の特性評価
- 摩擦攪拌プロセスによるフラーレン分散金属基複合材料の創製
- 高周波誘導加熱方式を用いた炭素鋼の摩擦攪拌接合
- ティグ溶接における陽極熱輸送とその溶込み断面積に与える影響
- 302 鋳造材の超音波TIG溶接(アーク溶接(I),平成18年度春季全国大会)
- 208 炭素鋼の摩擦攪拌接合継手の機械的特性に及ぼす炭素量の影響(FSW (II),平成18年度春季全国大会)
- 249 IF鋼の摩擦攪拌接合継手強度に及ぼす初期結晶粒径の影響(摩擦撹拌接合(II))
- 248 炭素鋼の摩擦攪拌接合(摩擦撹拌接合(II))
- 112 超微細粒アルミニウム、鋼の摩擦撹拌接合(FSW(II))
- 315 繰り返し重ね接合圧延した超微細粒材の摩擦攪拌接合
- 329 ティグアークにおける電子温度に与える陰極形状の効果
- 210 TIG溶接による摩擦攪拌接合継手の補修 : 超音波アーク溶接の適用(FSW (II),平成18年度春季全国大会)
- 209 超音波TIG溶接法の開発(アーク現象II)
- 溶融マグネシウムによるセラミック表面の濡れ
- 202 プラズマ環境下における溶融FeおよびFe系合金の表面張力
- パラボリックフライトを使ったシリコンの無容器プロセシング実験
- 落下塔を用いた種々の熱物性値測定
- 浮遊液滴法と静滴法によるSi の表面張力測定
- 125 超微細粒銅の摩擦攪拌接合
- 金属溶湯への粒子添加モデルとその検証
- 摩擦攪拌プロセスによるFe基金属ガラス分散アルミニウム基複合材料の作製
- 414 高炭素鋼の無変態摩擦攪拌接合(FSW (II))
- オーステナイト系ステンレス鋼の摩擦攪拌接合継手における耐腐食性の評価
- オーステナイト系ステンレス鋼の摩擦攪拌接合における接合効率の改善
- オーステナイト系ステンレス鋼の摩擦攪拌接合における耐腐食性の向上について
- 鉄鋼材料のレーザハイブリッド摩擦攪拌接合
- 鉄鋼材料の摩擦攪拌接合の現状と今後の展開
- 415 オーステナイト系ステンレス鋼の高速度摩擦攪拌接合(FSW (II))
- セラミックスと溶融Alの濡れを正確に測定する
- BNと溶融Al-Si合金の濡れ
- 1方向凝固させたAl-Si合金のSiの形態に及ぼすSrの影響
- 溶融AlのMgO表面でのぬれ
- FSPによる材料表面のナノコンポジット化(ナノ技術を応用した機能性接合)
- Numerical Simulation of Laser Fusion Zone Profile of Lotus-Type Porous Metals
- Dissimilar Metal Joining of Aluminum to Steel by MIG Arc Brazing Using Flux Cored Wire
- Evaluation of Grain Refinement and Mechanical Property on Friction Stir Welded Inconel 600
- Friction Stir Welding of Ultrafine Grained Interstitial Free Steels
- Weld Formation in Microgravity
- FRICTION STIR LAP JOINING OF PURE TITANIUM
- Effect of Intermetallic Compound Layer on Tensile Strength of Dissimilar Friction-Stir Weld of a High Strength Mg Alloy and Al Alloy
- Development of Microstructure and Mechanical Properties in Laser-FSW Hybrid Welded Inconel 600
- Transformation in Stir Zone of Friction Stir Welded Carbon Steels with Different Carbon Contents
- Development of W-Reinforced Zr-Based Metallic Glass
- 126 LIQUATION PHENOMENON DURING FRICTION STIR LAP WELDING OF AL AND MG DISSIMILAR ALLOYS
- Estimation of Material Flow in Stir Zone during Friction Stir Welding by Distribution Measurement of Si Particles
- Mechanical Properties of Friction-Stir-Welded Inconel 625 Alloy
- Laser Welding of Lotus-Type Porous Iron
- Pulsed Laser Irradiation for Triggered Discharge in Arc Welding System
- Composition Dependence of Titanium in Silver-Copper-Titanium Alloy Braze on Dissimilar Laser Brazing of Boron Nitride Ceramics and Cemented Carbide
- Grain Orientation and Texture Evolution in Pure Titanium Lap Joint Produced by Friction Stir Welding
- Microstructures and Mechanical Properties in Friction Stir Zone of Thixo-Molded AS41 Mg Alloy
- Influence of Precipitation Behavior of Different Crystalline Phases for Embrittlement Behavior of Several Zr-Based Metallic Glasses