Continuous Heating System Using Electric Resistance Heating for the Hot Rolling of Stainless Steels
スポンサーリンク
概要
- 論文の詳細を見る
Electric resistance of metals increases according to the elevation in temperature. Non-uniform temperature distribution in cross-section can be automatically sacrificed if we use electric resistance heating, and uniformly distributed cross-sectional temperature can be easily obtained. A continuous heating system using electronic resistance heating is developed, and its characteristics to the heating of stainless steel are examined through a series of basic experiments. Through the investigation, it has become clear that uniform continuous heating of stainless steel can be realized by proposed heating system. Although the composition of heating system is quite simple, high rate in temperature elevation can be obtained. Also, we can precisely control the temperature distribution in feeding (rolling) direction by continuous electric resistance heating, because temperature of metals can be rapidly changed only by changing the degree of electric current and time to impose electric current.
- 社団法人 日本鉄鋼協会の論文
- 2002-10-15
著者
-
Nishi Takaaki
Institute Of Industrial Science The University Of Tokyo
-
Yanagimoto Jun
Institute Of Industrial Science The University Of Tokyo
-
ASANO Yasunori
Institute of Industrial Science, The University of Tokyo
-
Asano Yasunori
Institute Of Industrial Science The University Of Tokyo
関連論文
- Finite Element Analysis of Tilting of Metal in Bar Rolled with Three-roll Mill
- Finite-Element Analysis of Metal Flow in Bearing Section during Extrusion Process of "L" "C" and "T" Sections - Combination of Three-Dimensional FE Simulation and Extrusion Die Design-2 -
- Finite-Element Analysis of Metal Flow in Bearing Section during Extrusion Process of Rectangular and Angle Sections - Combination of Three-Dimensional FE Simulation and Extrusion Die Design-1 -
- Mechanical Bonding Process to Manufacture Clad Materials-Divided Flow Bonding
- The Analysis of Phase Transformation for the Prediction of Microstructure Change after Hot Forming
- Analytical and Experimental Investigations into Microstructure Evolution in Hot Bar Stretching
- Flow Curve Determination for Metal under Dynamic Recrystallization Using Inverse Analysis
- Regression Method of Determining Generalized Description of Flow Curve of Steel under Dynamic Recrystallization
- FE-based Analysis for the Microstructure Evolution in Hot Bar Rolling
- Numerical Analysis for the Prediction of Microstructure after Hot Forming of Structural Metals
- Measurement of Ductile Forming Limit in Non-linear Strain Paths and Anisotropic Yield Conditions for 11% Cr Steel Sheets
- Effect of the Number of Work-roll Surface Division on Prediction of Contact Length in Coupled Analysis of Roll and Strip Deformation during Sheet Rolling
- Three-dimensional Numerical Analysis of Microstructural Evolution in and after Bar and Shape Rolling Processes
- Continuous Heating System Using Electric Resistance Heating for the Hot Rolling of Stainless Steels
- Combined Macro-Micro Modeling for Rolling Force and Microstructure Evolution to Produce Fine Grain Hot Strip in Tandem Hot Strip Rolling
- Ferrite Nucleation Kinetics inside Austenite Grain
- Incremental Formulation for the Prediction of Microstructural Change in Multi-pass Hot Forming
- Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu-Sn Alloy Manufactured by Continuous Draw Bending
- Interrupt Shearing Test for Evaluating Effect of Large Shear Deformation on Evolution of Microstructure into Ultrafine Grains
- Multistage and High-speed Compression Testing Machine for Obtaining Flow Stress and Microstructure Evolution in Hot Forming of Steels
- Application of Recrystallization Texture Evolution Model to Type 430 Stainless-Steel strip Production
- Experiments on and Finite Element Analyses of the Tilting of Fine Steel Wire in Roller Die Drawing