Effect of Initial Orientation on the Cold Rolling Behavior of Solidified Columnar Crystals in a 19%Cr Ferritic Stainles Steel.
スポンサーリンク
概要
- 論文の詳細を見る
The cold rolling behavior of solidified columnar crystals in a 19% Cr ferritic stainless steel has been investigated in order to clarify the effects of the initial orientation of each columnar grain and of the interaction with adjacent grain in a polycrystalline specimen. The specimen showed {001}<uv0> texture before rolling and {001}<110> texture after 70% rolling reduction. It was clearly shown that the rolled microstructure and the crystal rotation by rolling strongly depend on the initial orientation. The 70% rolled microstructure of (001)[100] oriented grains consisted of a large number of fine stringer deformation bands, whereas (001)[110] oriented grains showed a uniform and non-characteristic deformation structure. In the grains having intermediate orientations such as (001)[510]-[320], stringer deformation bands formed near grain boundaries. Both of the (001)[100] and (001)[110] oriented grains maintained their initial orientations even after 70% rolling reduction, while the (001)[510]-[320] oriented grains rotated toward (001)[110]. It was emphasized that the stability of (001)[100] orineted grains against rolling is contrast to the case of (001)[100] oriented bcc single crystals where the crystal rotation toward (001)<110> occurs. This difference was discussed from a viewpoint of the interaction with adjacent grains.
- The Iron and Steel Institute of Japanの論文
著者
-
Maki Tadashi
Department Of Materials Science And Engineering Kyoto University
-
Tsuji Nobuhiro
Graduate School Of Engineering Dep. Of Materials Sci. And Engineering Kyoto Univ.
-
Tsuzaki Kaneaki
Department of Metal Science and Technology, Faculty of Engineering, Kyoto University
関連論文
- Friction Stir Welding of Ultrafine Grained Interstitial Free Steels
- Microstructure Development and Superplasticity in (α+γ) Microduplex Alloys with Different Matrix Phases
- Microstructure Evolution in Pure Al Processed with Twist Extrusion
- Formation of Ultrafine Grained Structure in Carbon Steels without Severe or Heavy Plastic Deformation
- Transformation in Stir Zone of Friction Stir Welded Carbon Steels with Different Carbon Contents
- Grain Boundary Structure of Ultrafine Grained Pure Copper Fabricated by Accumulative Roll Bonding
- Change in Microstructure and Texture during Annealing of Pure Copper Heavily Deformed by Accumulative Roll Bonding
- Yield Strength of Ultrafine Grained Metallic Materials Fabricated by Severe Plastic Deformation
- Morphology and Crystallography of Hcp Zn Crystals Electrodeposited on Bcc Fe-3%Si Single Crystal Substrates
- The Origin of Midrib in Lenticular Martensite
- Grain Boundary Character and Superplasticity of Fine-Grained Ultra-High Carbon Steel
- Effect of Aging Treatment on Ultra-Fine Grains and Si-Phase in Al-0.5%Si Alloy Fabricated by ARB Process
- Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu-Sn Alloy Manufactured by Continuous Draw Bending
- Comparative Analysis of Plastic Flow and Grain Refinement in Pure Aluminium Subjected to Simple Shear-Based Severe Plastic Deformation Processing
- Effect of Deformation Temperature on Microstructure Evolution in ARB Processed Ultralow Carbon IF Steel
- Microstructural Evolution during ARB Process of Al-0.2 mass% Sc Alloy Containing Al_3Sc Precipitates in Starting Structures
- Effect of Initial Orientation on the Recrystallization Behavior of Solidified Columnar Crystals in a 19% Cr Ferritic Stainless Steel.
- Effect of Initial Orientation on the Cold Rolling Behavior of Solidified Columnar Crystals in a 19%Cr Ferritic Stainles Steel.
- Shape memory effect related to thin plate martensite with large thermal hysteresis in ausaged Fe-Ni-Co-Ti alloy.