Production of Mn-Fe Alloy from Slag Generated in Mn-removal Treatment of Molten Cast Iron
スポンサーリンク
概要
- 論文の詳細を見る
Production of Fe–Mn alloy from the slag generated in the Mn-removal treatment of cast iron was investigated by using the method of carbon reduction of FeO–SiO2–MnO and FeO–SiO2–MnO–CaO slags at 1723 K.In the first stage, almost all the Fe was reduced from the slags, followed by the reduction of Si and Mn. Finally, Fe–Mn–Si metal was obtained as a result of the reduction treatment. The addition of CaO to the FeO–SiO2–MnO slag had two effects: (1) the slag viscosity decreased, thereby improving slag reactivity, and (2) the SiO2 activity in the slag melt decreased, thereby lowering the Si content in the metal. It was confirmed that the reaction between carbon and the slag is rate limiting reaction. The contact condition between the slag and carbon has a significant influence on the slag reactivity; improvement of the contact condition leads to an increase in the slag reactivity.
- 2009-11-15
著者
-
Ueda Shigeru
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Inoue Ryo
Institute For Advanced Materials Processing Tohoku University
-
TAKAGAWA Takahito
Local Independent Administrative Agency Iwate Industrial Research Institute
-
IKE Hiroyuki
Local Independent Administrative Agency Iwate Industrial Research Institute
-
IWASHIMIZU Kouji
Local Independent Administrative Agency Iwate Industrial Research Institute
-
Ueda Shigeru
Institute Of Multidisciplinary Research For Advanced Materials (imram) Tohoku University
-
UEDA Shigeru
Institute of Industrial Science, The University of Tokyo
関連論文
- Quantitative Analysis of Total and Insoluble Elements and Inclusion Composition in Metal by Laser Ablation ICP-MS Method
- Thermodynamics on Control of Inclusions Composition in Ultra-clean Steels
- Dissolution Behavior and Stabilization of Fluorine in Secondary Refining Slags
- Influence of Gypsum Addition and Hydrothermal Treatment on Dissolution Behavior of Fluorine in Hot Metal Pretreatment Slags
- Mechanism of Dephosphorization with CaO-SiO_2-Fe_tO Slags Containing Mesoscopic Scale 2CaO・SiO_2 Particles
- Behavior of Phosphorous Transfer from CaO-Fe_tO-P_2O_5(-SiO_2) Slag to CaO Particles
- Fluorine-containing Mineral Phases in Ironmaking and Steelmaking Slags and Their Solubilities in Aqueous Solution
- Distributions of Sn, Sb, and Bi between Ag-Pb Alloy and PbO Based Melt at 1273K
- Characteristics of Solid Flow and Stress Distribution Including Asymmetric Phenomena in Blast Furnace Analyzed by Discrete Element Method
- Optimization of Physical Parameters of Discrete Element Method for Blast Furnace and Its Application to the Analysis on Solid Motion around Raceway