多段磁極式電磁比例アクチュエータの試作研究 : 第2報 : アーマチャの磁路断面積と突歯断面形状の影響

概要

論文の詳細を見る
In this study, a newly designed multi-step pole type actuator was constructed and tested. The cross sectional area of the magnetic path of the newly designed actuator was much larger than that of the formerly reported first prototype. The actuator length was minimized by using a newly designed shape of the teeth. The interval between the teeth was much smaller than that of the first prototype. The thrust characteristics of the newly designed actuator were measured. As a result, the range of armature stroke, where the thrust was constant, was about 2mm. This was approximately two times more than that of the first prototype. Also, it became clear that the length of this actuator was shorter than that of a comparable solenoid on the market whose thrust and installation area to the valve body are the same. Moreover, it became clear that the opposite direction magnetic force acting on the rear edge of the teeth was relatively large in the case of a multi-step pole type. It also became clear that the thrust of the actuator can be estimated from the magnetic force acting on the front edge of the teeth and that acting on the rear edge of the teeth.
社団法人　日本フルードパワーシステム学会の論文
2007-01-15