パルスNd:YAGレーザを用いたCBN及びダイヤモンド砥石の切断特性 : 超砥粒砥石のレーザ切断

概要

論文の詳細を見る
In this paper, the cutting characteristics of super abrasive stones using a pulsed Nd:YAG laser are studied. The influence of the heat on the stone surface cut by laser is investigated. As work materials, CBN stones and diamond stones with grain size of #2000 are used. As a result, the super abrasive stone of 3mm in thickness can be cut with the molten width of 0.2mm in maximum and with no chipping at the edge. The cutting speed of laser beam is 2.6 times faster than that of diamond blade in the case of CBN stone and 24 times faster in the case of diamond stone. There remains a heat affected zone (HAZ) in the stone surface and its thickness is about 0.02mm. In the HAZ, the abrasive grains are oxidized and their crystal structures are changed by the heat of laser irradiation. However, the HAZ raises the absorption of the laser beam at the stone surface and raises the strength of the stone a little because the pores in the HAZ are closed by the re-solidified vitrified bond. Therefore, laser cutting is useful for the manufacturing of the super abrasive stones in productivity and quality.
社団法人精密工学会の論文
2005-04-05