Oxidation Behavior and Caking Property of Coal under the Atmosphere at Low Oxygen Concentration

スポンサーリンク

概要

• 論文の詳細を見る

• Eight coals ranging from bituminous coal to brown coal were oxidized in a thermo-balance or a fixed bed reactor using 5 vol% of oxygen at 100-380°C for 10-400 min. The effects of coal particle size, coal rank, oxidation temperature and oxygen concentration on the oxidation behavior of coal were investigated. The caking property, FT-IR spectrum and pyrolysis behavior of sample oxidized were measured. The oxidation behavior strongly depended on the coal rank. The oxidation reaction of highly caking coal was controlled by the rate of internal gaseous diffusion. The caking property of bituminous coal decreases by the oxidation in the oxidative atmosphere of low oxygen concentration of 5 vol%, which corresponds to that in a flue gas.The aliphatic C-H groups in highly caking coals are easily oxidized during oxidation and remained in coal structure as relatively stable forms. The differences in chemical structure and caking property between the exterior part and the central part of oxidized coal particle was investigated. In the case of highly caking coal, the chemical structure and some properties of oxidized coal depends on the position of the coal particle because the mild oxidation reaction of coal proceeds from the exterior part of coal particle.

• 社団法人 日本鉄鋼協会の論文
• 2003-03-15

著者

• Takarada Takayuki

  Faculty Of Engineering Gunma University

• Maeno Yukihiko

  Nippon Steel Chemical Co. Ltd.

• OTA Hiroshi

  Faculty of Engineering, Nagoya University

• NISHIMURA Masaru

  Research and Development Center, The Kansai Coke and Chemicals Co., Ltd.

• Nishimura Masaru

  Research And Development Center The Kansai Coke And Chemicals Co. Ltd.

• Ota Hiroshi

  Faculty Of Engineering Nagoya University

• Ota Hiroshi

  Faculty Of Engineering Gunma University

関連論文

• A Numerical Study on the Combustion of a Low Temperature-carbonized Semi-coke Particle
• Regenerative Chatter Vibrations of Turning Workpieces : Two Degrees of Freedom and Their Stability Criteria
• On the Occurrence of Regenerative Chatter Vibrations : Vibration, Control Engineering, Engineering for Industry
• Influence of Unequal Pedestal Stiffness on the Instability Regions of a Rotating Asymmetric Shaft : 4th Report, Further Considerations of an Approximate Analysis
• On Elimination of the Unstable Region of the Major Critical Speed in a Rotating Shaft System Carrying an Unsymmetrical Rotor : Dynamical Effect of a Flexible Pedestal or Added Mass on the Shaft
• Oxidation Behavior and Caking Property of Coal under the Atmosphere at Low Oxygen Concentration
• Lateral Vibrations of a Rotating Shaft Driven by a Universal Joint : 2nd Report, Analyses and Experiments on Even Multiple Vibrations by Secondary Moment
• Experiments on Vibrations of a Hollow Rotor Partially Filled with Liquid
• Lateral-Torsional Coupled Vibrations of a Rotating Shaft Driven by a Universal Joint : Derivation of Equations of Motion and Asymptotic Analyses
• Lateral Vibrations of a Rotating Shaft Driven by a Universal Joint : 1st Report, Generation of Even Multiple Vibrations by Secondary Moment
• Lateral Vibrations of an Asymmetrical Shaft Driven by a Universal Joint : 3rd Report, Analyses and Experiments on Forced Vibrations of Horizontal Shaft Caused by Gravity
• Lateral Vibrations of a Rotating Shaft Driven by a Universal Joint : 3rd Report, Vibrations Caused by Frictions between a Cross-Pin and Yokes : Series C : Vibration, Control Engineering, Engineering for Industry
• Lateral Vibrations of an Asymmetrical Shaft Driven by a Universal Joint : 2nd Report, Generation Mechanism of Unstable Vibrations
• Unstable Vibrations Induced by Rotationally Unsymmetric Inertia and Stiffness Properties
• Chatter Vibrations of Machine Tool or Work with Directional Stiffness Inequality
• The Effect of a Flat Shaft on the Unstable Vibrations of the Shaft Carrying an Unsymmetrical Rotor
• Influence of Unequal Pedestal Stiffness on the Instability Regions of an Asymmetrical Rotor
• Influence of Unequal Pedestal Stiffness on the Instability Regions of a Rotating Asymmetric Shaft : 3rd Report, Mechanism for Occurrence of Two Types of Unstable Vibrations
• On the Shaft End Torque and the Forced Vibrations of an Asymmetrical Shaft Carrying an Asymmetrical Rotor
• Influence of Unegual Pedestal Stiffness on the Instability Regions of a Rotating Asymmetric Shaft : 2nd Report, Inclinational Vibrations with Effects of Gyroscopic Action
• On the Shaft End Torque and the Unstable Vibrations of an Asymmetrical Shaft Carrying an Asymmetrical Rotor
• Self-Excited Vibrations of Wire-Winding-Type Growing Apparatus for Silicon Single Crystals : Experimental Results and Considerations Relevant to Self-Excited Vibrations
• On the Vibrations of the Shaft Carrying an Asymmetrical Rotating Body
• Unstable Vibrations of the Shaft Carrying an Unsymmetrical Rotating Body : Vibrations Induced by Flexibility of Bearing Pedestals
• Elastic and Damping Properties of Journal Bearing : 1st Report, Stationary Properties of Oil Film Bearing by Finite Bearing Approximation
• On the Forced Vibrations of the Shaft Carrying an Unsymmetrical Rotor : Forced Vibrations Having the Circular Frequencies Differing from the Rotating Angular Velocity of the Shaft
• On the Forced Vibrations of the Shaft Carrying an Unsymmetrical Rotating Body : Response Curves of the Shaft at the Major Critical Speeds
• Grain Size Control of Diamond Membrane for X-Ray Mask by Use of Fluidized Bed Pretreatment

もっと見る 閉じる

スポンサーリンク