Solid-Liquid Mass Transfer and Critical Frequency for Complete Suspension in a Reciprocally Shaking Vessel
スポンサーリンク
概要
- 論文の詳細を見る
The mass transfer rate between solid particles and liquid and the critical frequency for complete suspension in a reciprocal shaking vessel were studied. The solid-liquid mass transfer coefficient of the reciprocal shaking can be correlated with the same correlation as that of a rotational shaking at higher shaking frequencies than the critical shaking frequency for complete suspension, NJS.kLdp/D = 0.112[dp4PV/(ρν3)]0.29Sc1/3 (NJS < N < Ntr3)The critical shaking frequency NJS was 20% higher than that of the rotational shaking, which was correlated with the following equation.NJS = 0.70dp0.06(ρΔρ/ρL)0.04X0.03/(D0.35d0.17ν0.04)
- 社団法人 化学工学会の論文
- 2003-11-01
著者
-
Tada Yutaka
Department of Life and Materials Engineering, Nagoya Institute of Technology
-
Kato Yoshihito
Department of Life and Materials Engineering, Nagoya Institute of Technology
-
HIRAOKA Setsuro
Department of Applied Chemistry, Nagoya Institute of Technology
-
Kato Yoshihito
Department Of Communications And Systems The University Of Electro-communications(present Address):i
-
Buechs J
Department Of Applied Chemistry Nagoya Institute Of Technology
-
Buchs Jochen
Department Of Biochemical Engineering Rwth-aachen University
-
WATANABE SYOKO
Department of Chemical System Engineering, Kitami Institute of Technology
-
Watanabe Syoko
Department Of Applied Chemistry Nagoya Institute Of Technology
-
Takeda Yasuhiro
Department Of Life And Materials Engineering Nagoya Institute Of Technology
-
Tada Yutaka
Department Of Life And Materials Engineering Nagoya Institute Of Technology
-
Kato Yoshihiro
Department Of Life And Materials Engineering Nagoya Institute Of Technology
-
Hiraoka S
Department Of Life And Material Engineering Nagoya Institute Of Technology
-
Tada Yutaka
Department Of Life And Material Engineering Nagoya Institute Of Technology
-
BUCHS JOCHEN
Department of Applied Chemistry, Nagoya Institute of Technology
-
Tada Yutaka
Department of Applied Chemistry, Nagoya Institute of Technology
関連論文
- Effect of Mixing on Sonochemical Reaction in a Sonoreactor
- Prediction of Mixing Pattern by Using Power Number Diagram in Baffled and Unbaffled Mixing Vessels
- PHASE EQUILIBRIA AND SIMULATION METHOD FOR HETEROGENEOUS AZEOTROPIC DISTILLATION
- Calculation of Three-Phase Flash and Partial Condensation for Ternary Systems
- A Method of Calculating Multistage Liquid-Liquid Extraction for Ternary Systems
- Solid-Liquid Mass Transfer in Gas-Liquid-Solid Agitated Vessel
- Low-Frequency Fluctuations in Agitated Vessels
- The Effect of Off-bottom Clearance on Macro Instabilities in a Stirred Vessel
- Transport Phenomena around Cylindrical Baffles in an Agitated Vessel Measured by an Electrochemical Method
- Effects of Liquid Film Formed on Flask Surface on Oxygen Transfer Rate in Shaking Flask and Development of Baffled Shaking Vessel by Optical Method Based on Sulfite Oxidation
- Mixing Performances of a New Mixing Equipment with Vibratory Fins
- Model Analysis of Mixing Time Correlation in an Agitated Vessel with Paddle Impeller
- The Superstring Action with General Reparametrization Symmetry : Particles and Fields
- Brans-Dicke Theory from M_4×Z_2 Geometry
- Necessity of a Two-Stage Process for the Production of Azadirachtin-Related Limonoids in Suspension Cultures of Azadirachta indica (PLANT BIOTECHNOLOGY)
- Estimation of Heat Transfer Coefficient from Universal Expression of Tangential Velocity at Boundary Layer Edge on Side Wall of a Fully Turbulent Agitated Vessel
- Estimation of Boundary Layer Thickness at Side Wall of a Fully Turbulent Agitated Vessel without Baffles
- Universal Expression of Tangential Velocity Distribution near Side Wall of a Fully Turbulent Agitated Vessel without Baffles
- Estimation of Tangential Velocity near Side Wall of Fully Turbulent Agitated Vessel without Baffles
- Prediction of Mixing Pattern by Using Power Number Diagram in Baffled and Unbaffled Mixing Vessels
- Performance of a Shaking Vessel-Type Bioreactor with a Current Pole
- IMPROVEMENT OF PARTICLE DISPERSION IN A SHAKING VESSEL WITH CURRENT POLE
- Performance of a Partially Packed Charcoal Pellet Bioreactor for Acetic Acid Fermentation
- Effect of mixing condition of additives on the solidification of green body by gelcasting method
- GAS-LIQUID TURBULENT TWO PHASE FLOW ALONG VERTICAL FLAT PLATE WITH GAS EVOLUTION
- Power Consumption and Gas-Liquid Mass Transfer Volumetric Coefficient in an Agitated Vessel with Pitched Wire-Gauze Blade Impeller under Aeration
- Correlation of Discharge Flow Rate in a Vessel with Pitched Blade Paddle Impeller
- Production of Artificial Seed from Horseradish Hairy Root
- Enhanced Anthocyanin Production from Grape Callus in an Air-Lift Type Bioreactor Using a Viscous Additive-Supplemented Medium
- Mixing Performance of an Agitated Vessel with Bottom Baffles
- Solid-Liquid Mass Transfer and Critical Frequency for Complete Suspension in a Reciprocally Shaking Vessel
- Mixing Performance of a Reciprocally Shaking Vessel
- Enhancement of Sonochemical Reaction with the Addition of Aluminum Powder in a Sonoreactor
- Correlation of Power Consumption for Propeller and Pfaudler Type Impellers
- Effects of Sparger Geometry on Power Consumption and Mass Transfer in a Gas–Liquid Agitated Vessel with Disk Turbine
- Effects of Reflection Plate on Ultrasonic Reaction in a Sonoreactor
- Hydrodynamics and Power Consumption of Rotating Baffled Shaking Cylindrical Vessel
- Effect of Ultrasonic Irradiation on Chemical Reaction in Iodine Solution Decolorization Experiment
- Improvement of Mixing Efficiencies of Conventional Impeller with Unsteady Speed in an Impeller Revolution
- VAPORIZATION FROM PURE LIQUID SURFACE IN A CENTRIFUGAL MOLECULAR STILL
- Effect of Mixing on Sonochemical Reaction in a Sonoreactor
- Effects of Sparger Geometry on Power Consumption and Mass Transfer in a Gas-Liquid Agitated Vessel with Disk Turbine
- MASS TRANSFER VOLUMETRIC COEFFICIENT AND DROPLET DIAMETER IN LIQUID-LIQUID DISPERSIONS STIRRED WITH A PADDLE IMPELLER WITH WIRE GAUZE
- Hydrodynamics and Power Consumption of Rotating Baffled Shaking Cylindrical Vessel
- Effects of Reflection Plate on Ultrasonic Reaction in a Sonoreactor
- Power Consumption and Gas - Liquid Mass Transfer Volumetric Coefficient in a Mechanically Agitated Vessel with Wire - Gauze Impeller
- Low-Frequency Fluctuations in Agitated Vessels
- Influence of Sputtering Conditions on the Characteristics of Superconducting Y-Ba-Cu-O Films
- Selection of Hypotoxigenic Vibrio cholerae Population by Human Intestinal Bacteria in Gnotobiotic Mice
- Heat transfer in jet mixing vessel with rotating nozzle around the vessel axis.
- Jet mixing of liquids in a rotating cylindrical vessel.
- Measurement of mass transfer rate from free surface in shaking vessel type bioreactor.
- Jet mixing of liquids with a rotating nozzle around the axis of a cylindrical vessel.
- Generalized relation between liquid pressure and solid compressive pressure in non-unidimensional filter cakes.
- Concentration dependence of diffusivity for the styrene-polystyrene and ethylbenzene-polystyrene systems.
- Combined free and forced laminar convection in thermal entrance region of horizontal triangular ducts.
- The effect of variable viscosity on laminar flow and heat transfer in rectangular ducts.
- Effects of Position and Geometry of Current Pole on Mixing Characteristics in Shaking Vessel
- Production of Regenerated Plantlet using Shaking Vessel-Type Bioreactor.
- Development of jet mixer with rotating and up-and-down moving nozzles.
- Vaporization of non-ideal binary mixture from liquid surface under vacuum.
- Mutual diffusivity of volatile materials in molten polystyrene.
- Theoretical analysis of turbulent flow and heat transfer around a surface-mounted obstacle.
- Optimum operating condition of Petlyuk's distillation process for ternary separation.
- A method for solving design problem of multicomponent distillation.
- Experimental study on heat transfer of combined free and forced laminar convection in thermal entrance region of horizontal rectangular ducts.
- Combined free and forced laminar convection in triangular ducts.
- Heat transfer under solidification of liquid on agitated vessel wall.
- Numerical analysis of three dimensional velocity profile of highly viscous Newtonian fluid in an agitated vessel with paddle impeller.
- Visualization of jet flow in a mixing vessel with a nozzle rotating around the vessel axis.
- Heat Transfer Coefficient and Mixing Time in a Cylindrical Mixing Vessel with Axial Jet Nozzles
- Analysis of heat and mass transfer in a centrifugal molecular still.
- NOTE ON ABSORPTION POINT EFFICIENCIES
- LAW OF THE WALL AND VELOCITY DEFECT LAW IN FULLY TURBULENT NON-BAFFLED AGITATED VESSEL
- Numerical method for solving steady three-dimensional heat conduction problem in sector column.
- TRANSPORT PHENOMENA AT THE WALL OF AGITATED VESSELS