Combination and Interface Structure of 9R Martensite Plate Variants in Ti_<50.0>Pd_<43.0>Fe_<7.0> Shape Memory Alloy
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2002-05-01
著者
-
NISHIDA Minoru
Department of Materials Science and Engineering, Faculty of Engineering, Kumamoto University
-
西田 稔
九州大学大学院総合理工学研究院融合創造理工学部門
-
Hara T
Steel Research Center National Institute For Materials Science
-
Hara T
National Inst. For Materials Sci. Tsukuba Jpn
-
Enami Kazuyuki
Department Of Mechanical System And Engineering Ryukoku University
-
Enami Kazuyuki
Deparment Of Materials Science And Engineering Osaka University
-
Enami Kazuyuki
Department Of Mechanical And System Engineering Ryukoku University
-
Hara Toru
Advanced Electron Microscopy Group National Institute For Materials Science (nims)
-
Hara Toru
Department Of Materials Science And Engineering Teikyo University
-
Hara Toru
National Institute For Materials Science
-
Hara Toru
Steel Research Center National Institute For Materials Science
-
Hara Toru
National Institute For Material Science
-
Hara Toru
Structural Materials Research Center Nims
-
II Sei-ichiro
Department of Material Science and Engineering, Graduate School of Science and Technology, Kumamoto
-
Nishida Minoru
Department Of Applied Science For Electronics And Materials Kyushu University
-
Ii Sei-ichiro
Department Of Material Science And Engineering Graduate School Of Science And Technology Kumamoto Un
-
Nishida Minoru
Department Of Applied Chemistry Faculty Of Science Science University Of Tokyo Kagurazaka
関連論文
- Synchrotron X-ray Diffraction Studies of the Incommensurate Phase of a Spin-Peierls System CuGeO_3 in Strong Magnetic Fields(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- MICROCALORIMETER ENERGY-DISPERSIVE X-RAY SPECTROMETRY OF CLAY MINERALS BY TRANSMISSION ELECTRON MICROSCOPE
- Phase Transformation and Crystal Structures of Ti_2Ni_3 precipitates in Ti-Ni Alloys
- The Effect of Additional Elements on Hydrogen Permeation Properties of Melt-Spun Ni-Nb-Zr Amorphous Alloys
- Hydrogen Permeation Characteristics of Melt-Spun Ni-Nb-Zr Amorphous Alloy Membranes
- Thermal Stability and Mechanical Properties of Glassy and Amorphous Ni-Nb-Zr Alloys Produced by Rapid Solidification
- 急速凝固Mg-Zn-Y系合金の組織と機械的性質
- Ti-Ni形状記憶合金のマルテンサイト相における逆位相境界状組織
- 液体急冷で作製したNb-TiNi水素透過合金膜のマイクロ破壊試験
- 急冷凝固Ti-Pd合金における逆位相境界のHAADF-STEM観察
- MgYZn合金における長周期積層規則構造と変形双晶の相互作用
- 急速凝固Mg_Zn_1Y_2合金の変形組織
- MA-HDH法による高強度マグネシウム合金の創製
- 急速凝固マグネシウム合金の組織と機械的性質
- Mg-Sc-X系3元急速凝固合金の組織と機械的性質
- Microstructure Analysis of High Coercivity PLD-Made Nd-Fe-B Thick-Film Improved by Tb-Coating-Diffusion Treatment
- 減圧プラズマ溶射したCoNiCrAlYTa皮膜の微細構造に及ぼす熱処理の影響
- 抵抗スポット溶接によるSPCC/A5052/SUS304界面の組織
- Deformation structure in rapidly solidified Mg_97Zn_1Y_2 alloy with long period stacking order phase
- Dislocation Structure in Rapidly Solidified Mg_Zn_1Y_2 Alloy with Long Period Stacking Order Phase
- Production of High Strength Mg_ Zn_1 Y_2 Alloy by Using Mechanically Alloyed MgH_2 Powder
- Techniques to separate metal from waste printed circuit boards from discarded personal computers
- Improvement of temperature coefficient of capacitance in Y5V film capacitor prepared by pulsed laser deposition (特集 [日本材料科学会]支部特集(四国地区))
- Pulverization of waste printed circuit boards
- Formation of Droplets on Thin Film Surface in Pulsed Laser Deposition Using Metal Targets
- Ti-6mol%Mo合金の組織と機械的性質に及ぼすSc添加の影響
- β-ZrおよびTi合金の冷間加工特性
- 急速凝固Mg-Zn-RE合金の組織と機械的性質
- Mg-X-RE系急速凝固合金の組織と機械的性質
- 30p-J-7 新しい駆動源を用いた高圧発生装置の開発 : Ti-Ni形状記憶合金の応用
- Determination of Hydrogen Desorption Activation Energy by a Single TDS Spectrum
- Hydrogen Trapping in Quenched and Tempered 0.42C-0.30Ti Steel Containing Bimodally Dispersed TiC Particles
- Hydrogen Trapping in Quenched and Tempered 0.42C-0.30Ti Steel Containing Bimodal Dispersions of TiC Particles
- Ductility Enhancement in B2-Type Zr-Co-Ni Alloys with Martensitic Transformation
- Experimental Consideration of Multistage Martensitic Transformation and Precipitation Behavior in Aged Ni-Rich Ti-Ni Shape Memory Alloys
- Structural Study of R-Phase in Ti-50.23 at. %Ni and Ti-47.75 at. %Ni-1.50 at. %Fe Alloys
- Nd-Fe-B焼結磁石のマクロな磁区構造と微細組織
- Ti-20mol%Al合金/鉄系材料接合体における界面分離現象(溶接・接合)
- 爆発圧着したベリリウム銅/ステンレス鋼接合体の界面組織と接合特性に及ぼす時効の影響
- 酸化物粒子分散強化銀と純銅の固相接合
- 窒化アルミニウムと各種活性金属を含む銀ろう間の界面組織と接合強度
- 爆発圧着法により作製したODS-Ag/りん青銅複合接点の界面組織と接合特性
- 爆着Ti/SUS430ステンレスクラッド鋼板の接合特性と界面構造に及ぼす熱処理の影響
- ZrおよびTaをインサートしたTi/鋼クラッド材の接合特性
- 爆着チタン・ステンレスクラッド鋼板の熱処理による接合特性の変化と TiC 炭化物の拡散バリア効果
- 爆着チタンクラッド鋼板の接合界面に生成するTiC層の拡散障壁効果
- IMMUNOHISTOCHEMICAL LOCALIZATION OF Na^+, K^+-ATPase IN HUMAN LIVER
- HISTOCHEMICAL STUDY OF BILE DUCTULAR CELLS IN CHOLESTASIS
- Effect of Heat Treatment Atmosphere on Multistage R-Phase Transformation in an Aged Ti-51.0at%Ni Alloy
- R相変態を経由したTi-Ni-Fe合金マルテンサイト相の微細構造
- Diffusion Bonding of TiAl Alloy to Eutectoid Steel and its Interfacial Self-destruction Behavior
- Superplasticity-like Behavior of Rapidly Solidified Ti-rich TiAl Powders and its Application to In-situ Sintering Bonding
- Combination and Interface Structure of 9R Martensite Plate Variants in Ti_Pd_Fe_ Shape Memory Alloy
- Effect of Aging on Martensitic Transformation in Ti-Rich Ti-Pd Shape Memory Alloy
- Ti - Al合金/鋼接合体の界面組織と接合強度
- Microstructure Dependence of Compactibility of Rapidly Solidified Ti-Rich TiAl Alloy Powders Produced by Plasma Rotating Electrode Process
- Asymmetric Allylation of Carbonyl Compounds with Tartrate-Modified Chiral Allylic Tin Reagents
- Asymmetric Allylation of Aromatic Aldehydes Using Chiral Allylic Tin Reagents
- 形状記憶合金の基礎と応用
- Effect of Nano-Sized Oxides on Annealing Behaviour of Ultrafine Grained Steels
- High Resolution Electron Microscopy Study of Cementite in Tempered Martensite
- 水中火花放電法により得られたAl粉末を原料にするAlNウィスカーの合成とその形態
- 急冷凝固粉末を用いたTiAl金属間化合物の接合
- 水中衝撃圧力によるSiCウイスカー強化窒化ケイ素複合材の作製と二,三の性質
- 水圧力媒体を用いた助剤無添加窒化ケイ素粉末の爆発衝撃固化
- Microstructure Evolutions at Severely-deformed Austenite/Martensite Interfaces of a Layer-integrated Steel
- 爆発圧接法による金属基積層複合材料の製造条件
- クロム炭化物被覆した炭素鋼と Si_3N_4 の接合
- 128 爆発圧接法によって作製された金属基積層複合材料の引張特性
- 127 爆発圧接法による金属基積層複合材料の製造条件
- ENERGY PROBLEMS IN THE SOVIET STEEL INDUSTRY
- The Influence of Cold Rolling Reduction on γ-value and Recrystallization Behavior in Fe-36Ni Alloy
- AG-Cuろうによりろう付けしたSi_3N_4/Si_3N_4接合体の接合特性と界面構造に及ぼす活性金属の影響
- Separation of Two Subsystems in Nd_Fe_B_ Composite Crystal Utilizing Synchrotron Radiation
- A Remark on High Energy Phenomena
- Ultraviolet-Light-Induced Desorption of Oxygen from SrTiO3 Surfaces
- Influence of Heating Temperature on Interface Separation Behavior between Ti-20mol% Al Alloy and High Carbon Steel
- Interfacial Reaction between Ti-Al Binary Alloys and High Carbon Steel
- 形状記憶効果/超弾性とは? (特集 形状記憶合金研究開発の最前線)
- Stellar Synthesis of the α-Particle Nuclei Heavier than Ne^
- Rapid Thermonuclear Reactions in Supernova Explosion
- SUS316L粉末の射出成形と焼結体の機械的性質
- Dyコーティングによる等方性Nd-Fe-B磁石粉の保磁力改善
- OS6(2)-6(OS06W0420) Nanoindentation Technique as a Probe for Characteristic Deformation Size
- Effect of Contact Depth on Nanohardness Distribution in a SCM440 Tempered Martensitic Steel
- マルエ-ジング鋼で強化した爆接Al系およびTi系積層複合材の引張強度におよぼす熱処理の影響
- 爆発圧接法によるSUS304鋼金網/Al系繊維複合材の組織の熱的安定性と機械的性質
- Thermoelastic Equilibrium and Specimen Size Effects in Thermoelastic Martensitic Transformations
- Electron Microscopy Study of ScMnO_3
- Crystallography and Morphology of Antiphase Boundary-Like Structure Induced by Martensitic Transformation in Ti-Pd Shape Memory Alloy
- Rietveld Analysis on Hydrogenated TiNi Shape Memory Alloy and Multiple-Stage Transformation
- Effect of Dislocation Density on the Initiation of Plastic Deformation on Fe-C Steels
- Transmission Electron Microscopy of Twins in 10M Martensite in Ni-Mn-Ga Ferromagnetic Shape Memory Alloy
- 形状記憶合金:Ti-Ni合金の最近の応用
- Complex Oxide Layer at a Nickel/Steel Interface Bonded under a Moderate Vacuum Condition
- Ti-NiおよびTi-Pd形状記憶合金のマルテンサイトにおける第II種双晶の界面構造
- Ti基急冷凝固合金粉末の透過電子顕微鏡試料作製法
- 形状記憶合金を利用した岩石破砕器の開発
- Electron Microscopy Study of ScMnO3
- Martensitic transformation in TiPd-Cr alloys.